Giesecke & Devrient ProNote 130 User manual

Original operating instructions
User Manual
ProNote 130
Art.-No. 535041001
Issue 01/2021
User Manual
ProNote 130

Note
The information, knowledge, and graphic material contained in this documentation are the sole property of Giesecke+Devrient Cur-
rency Technology GmbH and may not be reproduced or otherwise distributed without the prior written consent of Giesecke+Devrient
Currency Technology GmbH.
Giesecke+Devrient Currency Technology GmbH reserves the right to enforce all rights in this connection, especially in the event that
patents are granted. Provision of the documentation does not establish grounds for any claim to a license or right of use.
Trademarks
Product names, company names, and descriptions in this manual may be trademarks or registered trademarks of other companies.
Such terms in this manual are used for explanatory purposes only and no infringement on rights is intended.
Disclaimer
The specifications stated in this documentation do not represent guaranteed characteristics.
This documentation is based on the machine type ProNote 130.
Subject to technical changes.
This product meets the safety requirements of the relevant EU directives and
complies with the EN standards as listed in the EU Declaration of Conformity.
Manufacturer Giesecke+Devrient Currency Technology GmbH
Prinzregentenstraße 159
D-81677 Munich, Germany
Tel. [phone]
Fax [phone]
http://www.gi-de.com
Technical support → Chapter B “Technical Support”, p. 87
Printed for Giesecke+Devrient Currency Technology GmbH
© 2021
Item number 535041001
Issue date 01/2021
ProNote 130 User Manual 01/2021 III

IV ProNote 130 User Manual 01/2021

Table of Contents
Legal Notice ............................................................................... III
1 About This Manual.............................................................. 1
1.1 Overview of All Manuals for the ProNote 130 System Operating Instructions........ 1
1.2 Target Group of this Manual....................................................... 2
1.3 Content and Structure of This Manual............................................. 2
1.4 Conventions Used in this Manual.................................................. 3
1.4.1 General Document Conventions.................................................. 3
1.4.2 Document Conventions for Procedures (Instructions)............................... 5
1.4.3 Figures Used..................................................................... 6
2 Safety........................................................................... 7
2.1 Safety Information Symbols....................................................... 7
2.2 Symbols Used to Identify Specific Hazards ........................................ 8
2.3 Safety Information................................................................ 8
2.3.1 Proper Use....................................................................... 8
2.3.2 Prohibition of Unauthorized Modifications or Changes ............................. 9
2.3.3 Circumstances Under Which the Product May Not Be Operated .................... 9
2.3.4 Safety Information to Protect Personnel ........................................... 9
2.3.5 Safety Information for Software.................................................. 10
2.3.6 Electromagnetic Compatibility ................................................... 10
2.3.7 Information on Special Dangers for the Operator.................................. 10
3 Overview of ProNote 130....................................................... 13
3.1 General Information on the Product ProNote 130................................. 13
3.2 General Usage Information...................................................... 14
3.3 Front and Rear View of ProNote 130............................................. 14
3.3.1 Front View...................................................................... 15
3.3.2 Rear View...................................................................... 16
3.4 Control Panel................................................................... 17
3.4.1 Touchscreen Display............................................................ 17
3.4.2 Keys of the Control Panel........................................................ 18
3.5 Counting Modes................................................................. 19
3.6 Preparing Banknotes............................................................ 20
4 Technical Data................................................................. 25
5 Installation..................................................................... 27
5.1 Transport....................................................................... 27
Table of Contents
The information, knowledge, and graphic material contained in this documentation is the sole property of Giesecke+Devrient Currency Technology GmbH and may not be repro-
duced or otherwise distributed without the prior written consent of Giesecke+Devrient Currency Technology GmbH. Giesecke+Devrient Currency Technology GmbH reserves the
right to enforce all rights in this connection, especially in the event that patents are granted. Provision of the documentation does not establish grounds for any claim to a license or
right of use.
ProNote 130 User Manual 01/2021 V

5.1.1 Transporting Inside Buildings.................................................... 27
5.1.2 Transport Outside of Buildings................................................... 28
5.2 Unpacking...................................................................... 28
5.3 Installing and Connecting........................................................ 31
5.4 Disposal ........................................................................ 32
6 Operating ProNote 130......................................................... 33
6.1 Switching the Machine On and Off............................................... 33
6.2 Counting Banknotes............................................................. 34
6.2.1 Suggestions for Good Banknote Feeding......................................... 34
6.2.2 Counting Pre-sorted Denominations (VALUE BALANCING Mode)................. 34
6.2.3 Counting Single Denominations.................................................. 37
6.2.4 Counting Banknotes............................................................. 38
6.3 Selecting the Currency.......................................................... 40
6.4 Selecting the Operating Mode................................................... 40
6.5 Adding Counting Results........................................................ 41
6.6 Enabling and Disabling Batch Counting.......................................... 42
6.7 Reducing Noise and Counting Speed............................................ 43
6.8 Displaying Details of the Counting Result......................................... 43
6.9 Starting Counting and Clearing.................................................. 44
7 Defining Settings via the User Menu........................................... 45
7.1 User Menu...................................................................... 45
7.2 How to Access the User Menu................................................... 47
7.3 Setting Function of User-Defined Keys........................................... 47
7.4 Saving User Settings as Shortcuts............................................... 48
7.5 Selecting Counting Speed....................................................... 49
7.6 Checking Version Information of Machine........................................ 50
7.7 Setting Alarm Beep.............................................................. 51
7.8 Configuring the Mode............................................................ 52
7.9 Changing Language of User Interface............................................ 53
7.10 Setting Auto Counting........................................................... 54
7.11 Setting Button Delay............................................................. 55
7.12 Setting ADD Function........................................................... 56
7.13 Restoring User Parameters to Default Values..................................... 57
7.14 Calibrating Screen.............................................................. 58
8 Maintaining Machine........................................................... 61
8.1 Opening and Closing the Transport Section...................................... 61
8.2 Cleaning the Banknote Processing Machine...................................... 61
8.2.1 Cleaning Aids................................................................... 62
Table of Contents
The information, knowledge, and graphic material contained in this documentation is the sole property of Giesecke+Devrient Currency Technology GmbH and may not be repro-
duced or otherwise distributed without the prior written consent of Giesecke+Devrient Currency Technology GmbH. Giesecke+Devrient Currency Technology GmbH reserves the
right to enforce all rights in this connection, especially in the event that patents are granted. Provision of the documentation does not establish grounds for any claim to a license or
right of use.
VI ProNote 130 User Manual 01/2021

8.2.2 Cleaning the Cover.............................................................. 62
8.2.3 Cleaning the Transport Section.................................................. 65
8.3 Adjusting the Feeding Gap....................................................... 68
8.4 Changing the Fuse.............................................................. 70
9 Clearing the Jam in the Transport Section..................................... 71
Appendix ................................................................................. 73
A Error Messages................................................................ 73
A.1 Errors During Counting.......................................................... 73
A.1.1 Stacker is Full (Error:10)......................................................... 73
A.1.2 Counterfeit or Suspicious Banknote (Error:36 FF)................................. 74
A.1.3 Counterfeit or Suspicious Banknote (Error:37 F-C)................................ 74
A.1.4 Slant Notes (Error:44)........................................................... 75
A.1.5 Double or Chained Error (Error:46/48)............................................ 76
A.1.6 Incomplete Notes (Error:52)..................................................... 77
A.1.7 Width/Length Error (Error:53).................................................... 78
A.1.8 Cannot Judge Denomination (Error:57)........................................... 78
A.1.9 Denomination Different (Error:62)................................................ 79
A.1.10 Abnormal....................................................................... 80
A.2 Self-Test Error Messages........................................................ 80
A.2.1 Feed Sensor Abnormal (Error:14)................................................ 80
A.2.2 Receive Sensor Abnormal (Error:15)............................................. 81
A.2.3 Left#1 Count Sensor (Error:18).................................................. 81
A.2.4 Right#1 Count Sensor (Error:19)................................................. 82
A.2.5 Rotate Speed Sensor (Error:22).................................................. 83
A.2.6 Count Sensor Dust Warning (Error:31)........................................... 83
A.2.7 UV Sensor...................................................................... 84
A.3 Sensitivity Parameters Setting Error.............................................. 84
B Technical Support.............................................................. 87
Glossary.................................................................................. 91
Table of Figures .......................................................................... 93
Index...................................................................................... 95
Table of Contents
The information, knowledge, and graphic material contained in this documentation is the sole property of Giesecke+Devrient Currency Technology GmbH and may not be repro-
duced or otherwise distributed without the prior written consent of Giesecke+Devrient Currency Technology GmbH. Giesecke+Devrient Currency Technology GmbH reserves the
right to enforce all rights in this connection, especially in the event that patents are granted. Provision of the documentation does not establish grounds for any claim to a license or
right of use.
ProNote 130 User Manual 01/2021 VII

Table of Contents
The information, knowledge, and graphic material contained in this documentation is the sole property of Giesecke+Devrient Currency Technology GmbH and may not be repro-
duced or otherwise distributed without the prior written consent of Giesecke+Devrient Currency Technology GmbH. Giesecke+Devrient Currency Technology GmbH reserves the
right to enforce all rights in this connection, especially in the event that patents are granted. Provision of the documentation does not establish grounds for any claim to a license or
right of use.
VIII ProNote 130 User Manual 01/2021

1 About This Manual
This chapter contains the following information:
●Overview of all manuals in the ProNote 130 operating instruc-
tions
●Target group of this manual
●Content and structure of this manual
●A description of the conventions used in this manual
1.1 Overview of All Manuals for the ProNote 130 System Operating
Instructions
This manual forms part of the System Operating Instructions. The
following manuals form part of the System Operating Instructions:
Quick Start Guide These quick instructions are intended for all users of the product.
They describe the first steps without using text so that the user can
operate the product. The quick instructions are supplied with the
product.
Safety Information The safety information is intended for all users of the product. It
describes all the necessary safety measures for hazard-free use of
the product. The safety information is supplied with the product.
User Manual The user manual is intended for all users of the product and can
contain the following information:
●Requirements for the installation site as well as for the transport
and secure operation of the product
●Technical data for the product
●Installing and connecting the product
●Operating the product and straightforward cleaning and mainte-
nance work that is not performed by Service
●Installing and using the software applications
Service Manual The Service Manual describes maintenance work carried out on
the product by field engineers.
The maintenance work includes:
●The replacement of parts for repairs (corrective measures)
including the necessary adjustment work
●Installing and using the software application for Service
You will only receive a service manual after you or your staff have
received training from G+D to become a field engineer.
About This Manual
The information, knowledge, and graphic material contained in this documentation is the sole property of Giesecke+Devrient Currency Technology GmbH and may not be repro-
duced or otherwise distributed without the prior written consent of Giesecke+Devrient Currency Technology GmbH. Giesecke+Devrient Currency Technology GmbH reserves the
right to enforce all rights in this connection, especially in the event that patents are granted. Provision of the documentation does not establish grounds for any claim to a license or
right of use.
ProNote 130 User Manual 01/2021 1
1

Troubleshooting Man-
ual
The Troubleshooting Manual offers an interactive troubleshooting
including links to detailed procedures and video tutorials.
The Troubleshooting Manual is only available as part of the elec-
tronic documentation library EB Suite. The contents of the Trouble-
shooting Manual depend on your access rights.
Spare Parts Catalog Please use the electronic spare parts catalog for Banknote Pro-
cessing Systems on CD/DVD to order spare parts.
1.2 Target Group of this Manual
The manual is intended for the operator.
1.3 Content and Structure of This Manual
This manual contains the following:
●The → "Safety" chapter contains important safety information.
●In the → "General Information about the Product ProNote 130"
chapter, you will find an overview of the product..
●The→ "Technical Data" chapter contains the technical data for
the product and describes the requirements that must be met at
the installation site to safely operate the product.
●The → "Installation" chapter contains information on the trans-
port, installation, and commissioning of the product.
●The → "Operating" chapter describes step-by-step procedures
on how to operate the banknote processing machine.
●The → "Defining Settings via the User Menu" chapter describes
how to define user settings via the user menu.
●The → "Maintaining the Machine" chapter describes procedures
for cleaning the machine and adjusting the feed gap.
●The → "Clearing Jam" chapter describes how to clear a bank-
note jam.
●The → Appendix contains useful additional information.
–Error messages
–Contact addresses
–A list of abbreviations and glossary of terms
–Table of figures
–Index
About This Manual
The information, knowledge, and graphic material contained in this documentation is the sole property of Giesecke+Devrient Currency Technology GmbH and may not be repro-
duced or otherwise distributed without the prior written consent of Giesecke+Devrient Currency Technology GmbH. Giesecke+Devrient Currency Technology GmbH reserves the
right to enforce all rights in this connection, especially in the event that patents are granted. Provision of the documentation does not establish grounds for any claim to a license or
right of use.
2ProNote 130 User Manual 01/2021
1

1.4 Conventions Used in this Manual
1.4.1 General Document Conventions
The following formatting styles are used as standard to identify cer-
tain information:
Conventions Definition
This text is important. Underlined text indicates important
information.
Mechanical operating
control
Names of mechanical operating con-
trols like keys or switches are written in
bold.
Example: Press Start on the device.
GUI Text Objects in the graphical user interface
(GUI), e. g. a button, are in bold.
Example: Click OK.
Menu option > Menu
option
Menu names are in bold. Angle brack-
ets indicate navigation through menus.
Example: Select File > Print from the
menu.
'User input' User inputs are in single quotes.
Example: Enter port = '8080'.
<Placeholder> Placeholders for display text or user
input are in angle brackets.
Example: Enter <Password>.
[Key] Keys on the keyboard are in square
brackets.
Example: Press [Alt] + [p] to print the
file.
File or path File names or paths are in italics.
Example: Open readme.txt.
Command Commands are in Courier font.
About This Manual
The information, knowledge, and graphic material contained in this documentation is the sole property of Giesecke+Devrient Currency Technology GmbH and may not be repro-
duced or otherwise distributed without the prior written consent of Giesecke+Devrient Currency Technology GmbH. Giesecke+Devrient Currency Technology GmbH reserves the
right to enforce all rights in this connection, especially in the event that patents are granted. Provision of the documentation does not establish grounds for any claim to a license or
right of use.
ProNote 130 User Manual 01/2021 3
1

Conventions Definition
Example: Open an input window and
enter ping.
Code Codes are in courier font.
"Title" Titles of reports, logs, modes, windows,
etc. are in quotation marks.
Example: The "xy" window appears.
→ "Manual title" References to other manuals are in ital-
ics. The manual title is also in quotation
marks.
Example: → "Service Manual"
→ Chapter "Chapter
heading"
References to other chapters/sections
are in italics. The title of the chapter/
section is also in quotation marks.
For example, → "Jam Recovery" chap-
ter
Homepage Giesecke
+Devrient
References to a website address are in
italics.
1. list entry
2. list entry
In numbered lists, make sure you follow
the sequence of list entries.
●list entry
●list entry
In unnumbered lists, the sequence of
list entries is not important.
a) list entry
b) list entry
In alphabetical lists, the list entries give
alternatives.
This symbol identifies important infor-
mation.
* * indicates optional components.
Inquire if the option is available on your
machine.
About This Manual
The information, knowledge, and graphic material contained in this documentation is the sole property of Giesecke+Devrient Currency Technology GmbH and may not be repro-
duced or otherwise distributed without the prior written consent of Giesecke+Devrient Currency Technology GmbH. Giesecke+Devrient Currency Technology GmbH reserves the
right to enforce all rights in this connection, especially in the event that patents are granted. Provision of the documentation does not establish grounds for any claim to a license or
right of use.
4ProNote 130 User Manual 01/2021
1

Conventions Definition
[1] Numbers in square brackets indicate
individual operational steps. You must
carry out these steps in the sequence
indicated.
An arrow as shown after a step indi-
cates the result of that step.
1.4.2 Document Conventions for Procedures (Instructions)
This section explains how procedures (instructions) are set out.
Follow procedures step by step in the specified order.
Requirements for the
Procedure
●Requirement 1
●Requirement 2
DANGER
Safety information before the procedure
Applies to the whole procedure
Observe the measures to prevent risks at each step.
Procedure
[1] Perform this step.
[2] Perform this step. Note the image above.
ðResult of this step
Figure 1: Image of a Result
About This Manual
The information, knowledge, and graphic material contained in this documentation is the sole property of Giesecke+Devrient Currency Technology GmbH and may not be repro-
duced or otherwise distributed without the prior written consent of Giesecke+Devrient Currency Technology GmbH. Giesecke+Devrient Currency Technology GmbH reserves the
right to enforce all rights in this connection, especially in the event that patents are granted. Provision of the documentation does not establish grounds for any claim to a license or
right of use.
ProNote 130 User Manual 01/2021 5
1

Secondary Steps
[3] To perform this step:
[3-1] Perform this secondary step.
[3-2] Perform this secondary step.
Prompts to Skip or Repeat Steps
[4] Prompt, e.g. has the error been rectified?
No: à [5]
Yes: à [6]
[5] Only carry out this step if you answered the above prompt
with No.
Continue with: à [7]
[6] Only carry out this step if you answered the above prompt
with Yes.
Continue with: à [7]
[7] Perform this step.
Alternative Steps
[8] Select the appropriate alternative:
For variant A: à [8a]
For variant B: à [8b]
[8a] Variant A
[8a-1] Perform this step for variant A.
[8a-2] Perform this step for variant A.
[8b] Variant B
[8b-1] Perform this step for variant B.
Result ðResult of the procedure
1.4.3 Figures Used
The screenshots used are examples and may differ from what is
actually shown on the display.
About This Manual
The information, knowledge, and graphic material contained in this documentation is the sole property of Giesecke+Devrient Currency Technology GmbH and may not be repro-
duced or otherwise distributed without the prior written consent of Giesecke+Devrient Currency Technology GmbH. Giesecke+Devrient Currency Technology GmbH reserves the
right to enforce all rights in this connection, especially in the event that patents are granted. Provision of the documentation does not establish grounds for any claim to a license or
right of use.
6ProNote 130 User Manual 01/2021
1

2 Safety
Before you work with our product, you must have previously read
and understood the system operating instructions and especially
the safety instructions they contain. You may only then operate and
maintain our product if you are trained and authorized to do so.
Remain conscious of safety as you work.
This chapter contains the following information:
●Overview of the general symbols for safety information
●Overview of the symbols identifying specific hazards
●Safety instructions for ProNote 130
2.1 Safety Information Symbols
DANGER
The symbol together with the signal word DANGER indicates an
immediate danger to life or health.
Ignoring this warning results in death or serious injury.
The safety information tells you about the type and source of the
danger, the consequences if it is not observed, and the measures
to take to prevent the danger.
WARNING
The symbol together with the signal word WARNING indicates a
possible danger to life or health.
Ignoring this warning may result in death or serious injury.
The safety information tells you about the type and source of the
danger, the consequences if it is not observed, and the measures
to take to prevent the danger.
CAUTION
The symbol together with the signal word CAUTION indicates a
possible danger to health.
Ignoring this warning may result in minor injury.
The safety information tells you about the type and source of the
danger, the consequences if it is not observed, and the measures
to take to prevent the danger.
Safety
The information, knowledge, and graphic material contained in this documentation is the sole property of Giesecke+Devrient Currency Technology GmbH and may not be repro-
duced or otherwise distributed without the prior written consent of Giesecke+Devrient Currency Technology GmbH. Giesecke+Devrient Currency Technology GmbH reserves the
right to enforce all rights in this connection, especially in the event that patents are granted. Provision of the documentation does not establish grounds for any claim to a license or
right of use.
ProNote 130 User Manual 01/2021 7
2

NOTICE
This symbol, with the signal word NOTICE, is used to identify
warning information.
Ignoring this information may result in damage to parts of the prod-
uct or jeopardize data consistency.
The safety information tells you about the type and source of the
risk, the consequences if it is not observed, and the measures to
take to prevent the risk.
2.2 Symbols Used to Identify Specific Hazards
Safety information with symbols for specific dangers tells you about
the type and source for the risk, the consequences if it is not
observed, and the measures to take to prevent the risk.
Risk of electric shock
This symbol indicates a danger of electric shock.
Risk of tripping
This symbol indicates a risk of tripping.
2.3 Safety Information
2.3.1 Proper Use
Our product has been constructed using the latest technology and
is safe for operation. For your safety, you must use it appropriately
and properly.
You must comply with the necessary safety measures for hazard-
free use of the product. Failure to follow these instructions can put
lives at risk or can damage the product.
Always take notice of the safety warnings, even if you are an expe-
rienced user with good system knowledge.
Proper Use A banknote processing system may only be used to check bank-
notes for denomination, authenticity, and condition, to count and to
sort them.
Improper Use Improper use, for example, the singling of hard objects such as
coins, paper clips and staples, is not permitted and will result in the
invalidation of the warranty.
Safety
The information, knowledge, and graphic material contained in this documentation is the sole property of Giesecke+Devrient Currency Technology GmbH and may not be repro-
duced or otherwise distributed without the prior written consent of Giesecke+Devrient Currency Technology GmbH. Giesecke+Devrient Currency Technology GmbH reserves the
right to enforce all rights in this connection, especially in the event that patents are granted. Provision of the documentation does not establish grounds for any claim to a license or
right of use.
8ProNote 130 User Manual 01/2021
2

2.3.2 Prohibition of Unauthorized Modifications or Changes
For safety reasons, no changes may be made to the product with-
out informing and receiving written approval from the manufacturer.
Any unauthorized structural changes or additions invalidate the EU
Declaration of Conformity for the product.
Only genuine spare parts may be used for repair.
2.3.3 Circumstances Under Which the Product May Not Be Operated
The product may not be operated if the defined ambient and oper-
ating conditions are not fulfilled.
Depending on the product, you can find this data in the "Site and
Facility Requirements" manual of the system operating instructions
or in the "Site and Facility Requirements" or "Technical Data" sec-
tion of the user manual.
If the product is not in an operational state for technical or other
reasons, you must secure the product against being used.
2.3.4 Safety Information to Protect Personnel
Be sure to comply with national accident prevention regulations.
When using the product, ensure the following:
●Avoid wearing loose-fitting or open clothing.
●Remove ties, rings, watches, and jewelry before beginning
work.
●Protect long hair with a scarf or hair net.
Refrain from any methods of operation that may compromise the
operational safety of the product. Proceed in accordance with the
safety information specified in the System Operating Instructions.
Ensure that unauthorized personnel are kept away from the prod-
uct.
Check the product for any externally identifiable damage and faults
at least once a day. Immediately report any safety-related changes
(including in the operating behavior) to the internal department
responsible.
Only operate the product when it is in perfect working condition.
Do not remove any safety devices. Do not disable any safety devi-
ces. This can put lives at risk or can damage the product.
Safety
The information, knowledge, and graphic material contained in this documentation is the sole property of Giesecke+Devrient Currency Technology GmbH and may not be repro-
duced or otherwise distributed without the prior written consent of Giesecke+Devrient Currency Technology GmbH. Giesecke+Devrient Currency Technology GmbH reserves the
right to enforce all rights in this connection, especially in the event that patents are granted. Provision of the documentation does not establish grounds for any claim to a license or
right of use.
ProNote 130 User Manual 01/2021 9
2

2.3.5 Safety Information for Software
The product has been designed to state-of-the-art software tech-
nology standards and is safe to operate. Failure to use the soft-
ware correctly does not pose a hazard to the user.
Some basic knowledge of the software is required to use the prod-
uct. Take care to consider the effects of changing or resetting
parameters.
Incorrect use by insufficiently trained persons can lead to data loss
and errors.
2.3.6 Electromagnetic Compatibility
At all stages of configuration, the ProNote 130 complies with the
basic requirements of the EMC Directive (emitted interference and
interference resistance).
2.3.7 Information on Special Dangers for the Operator
During operation of the product, observe the following information:
Electrical Voltage/Current
Work on live electrical parts and assemblies carries the risk of
electric shocks. Only carry out this work if you are authorized to do
so.
Ergonomics
Stand or sit in a comfortable manner. Arrange your workstation so
that you can work ergonomically.
●Set your chair to the optimum position.
●Adjust the height of the work surface if possible.
●Set the screen to the optimum position if possible.
Non-Specified Materials
Dangers may arise from the use of non-specified materials such as
cleaning material, sprays, lubricants, etc. If you use these materi-
als, follow the manufacturer's safety instructions.
Dust
Never use compressed air to clean the product. Breathing in dust
can lead to health problems. Dust in the air can also damage the
bearings and electronic parts. No claims can be made under the
warranty for parts that are damaged in this way. Always vacuum up
Safety
The information, knowledge, and graphic material contained in this documentation is the sole property of Giesecke+Devrient Currency Technology GmbH and may not be repro-
duced or otherwise distributed without the prior written consent of Giesecke+Devrient Currency Technology GmbH. Giesecke+Devrient Currency Technology GmbH reserves the
right to enforce all rights in this connection, especially in the event that patents are granted. Provision of the documentation does not establish grounds for any claim to a license or
right of use.
10 ProNote 130 User Manual 01/2021
2

any dust with a suitable vacuum device, which is fitted with a
micro-filter.
Safety
The information, knowledge, and graphic material contained in this documentation is the sole property of Giesecke+Devrient Currency Technology GmbH and may not be repro-
duced or otherwise distributed without the prior written consent of Giesecke+Devrient Currency Technology GmbH. Giesecke+Devrient Currency Technology GmbH reserves the
right to enforce all rights in this connection, especially in the event that patents are granted. Provision of the documentation does not establish grounds for any claim to a license or
right of use.
ProNote 130 User Manual 01/2021 11
2

Safety
The information, knowledge, and graphic material contained in this documentation is the sole property of Giesecke+Devrient Currency Technology GmbH and may not be repro-
duced or otherwise distributed without the prior written consent of Giesecke+Devrient Currency Technology GmbH. Giesecke+Devrient Currency Technology GmbH reserves the
right to enforce all rights in this connection, especially in the event that patents are granted. Provision of the documentation does not establish grounds for any claim to a license or
right of use.
12 ProNote 130 User Manual 01/2021
2