Lighthouse ApexPortable Manual

READ ME FIRST!
ApexPortable Particle Counter
Thank you for purchasing the Lighthouse Worldwide Solutions' ApexPortable Particle Counter!
This precision instrument requires minimal set up time and very little routine maintenance.
This document will help get the ApexPortable into use quickly.
Operating Manual is on the included Flash Drive.
I - Unpack and Inspect
Unpack instrument and inspect for damage. Compare package
contents to the pack slip. Report issues to Lighthouse.
Remove clear protective sheet from the instrument face
and USB port.
II - Attach Power Supply
Place instrument on level surface.
Locate instrument’s power supply close to instrument;
connect DC power cord to rear Power Input socket.
Connect theAC cord to Power Supply and AC Input end
to an AC source. Power Supply will charge the battery.
Allow eight-hour battery charge before putting instrument
into service.
III - Apply Power
(See reverse side for additional information)
After charging battery, remove Inlet Cap, attach sample tube to Inlet Barb on top of
ApexPortable
Press Power Button. After a few seconds, Splash screen will appear followed by Main screen.
Store Inlet Cap in safe place for use when instrument needs to be moved or sent for
annual calibration.
Power
9
Input
Power Button
with cover plate
Filtered Exhaust
Rubber Splash Cover
Folded Out of Way
Clear Protective Sheet
Inlet Cap
Inlet Barb
USB Port

For more information, please contact:
Service and Support
Tel: [phone] (Toll Free USA)
Tel: [phone] (Outside of USA)
[email protected].
www.golighthouse.com PN 248083441-1 Rev 
Refer to the Operating Manual on Flash Drive for detailed ApexPortable configuration, operation and other information .
5DLVH6SODVK&RYHUZKLOHUHYLHZLQJ
WKHSKRWRWRWKHULJKW7KH56
FRQQHFWRUVXSSOLHV56DQG56
FRPPXQLFDWLRQV56LVXVHGSULPDULO\LQ
LQGXVWULDOHQYLURQPHQWQHWZRUNV7KH6PDUW3RUW
FRQQHFWRULVIRU/:6IDFWRU\XVHRQO\7KH(WKHUQHW
5-FRQQHFWVWKHApexPortableWRWKHVDPH(WKHUQHW
QHWZRUNXVHGE\PRQLWRULQJFRPSXWHUV8VH&DWH
FDEOHVIRU56DQG&DWFDEOHVIRU(WKHUQHW
'R127FRQQHFWWR56DQG(WKHUQHWSRUWVVLPXOWDQHRXVO\QHWZRUNHTXLSPHQW
DQGWKHLQVWUXPHQWPD\EHGDPDJHGDQGWKHZDUUDQWLHVYRLGHG
V - Set up Channel Thresholds and Alarms
IV - Set Up COMM Connections ApexPortable Communication Ports
RS-485
Splash Cover
SmartPort
Ethernet
)ROORZWKHVHVWHSVWRHQDEOHGLVDEOHFKDQQHOVDQGWRVHWWKUHVKROGVDQGDODUPV
Step 1 Step 2
Step 5 Step 6 Step 7
Step 3
p
Enable
Disable
or
Step 4
Channel
Enable
Alarm
or
Disable
Threshold
Button
to type the value desired
Use the keypad
followed by the ENTER
button
VI - Unit is Ready to Start Counting Particles
1RWH,IWKHIURQWSDQHOGRHVQRWUHVSRQGWRVWLPXOLWKHQZLWKWKHXQLWRIISUHVVDQGKROGWKHFHQWHU
RIWKHVFUHHQ3RZHUXQLWRQ5HOHDVHWKHVFUHHQZKHQLWEHHSVDQGIROORZWKHLQVWUXFWLRQV