Nautilus Hyosung MONiMAX7600TA User manual

Installation Manual
MONiMAX7600TA System
V01.00.00 (2017.10.25)
© Nautilus Hyosung, Inc. All Rights Reserved.

© Nautilus Hyosung, Inc. All Rights Reserved. I
Revision History
Installation Manual –MX7600TA System
No.
Version
Date
Description of Change
Chapter
1
V01.00.00
2017/10/25
New Publication
All
© Nautilus Hyosung Inc. All Rights Reserved.
The content of this specification is protected by copyright laws.
2017. 10. 25 1st Release

© Nautilus Hyosung, Inc. All Rights Reserved. II
Contents
Chapter1. Preface...........................................................................................................................1-1
Purpose ........................................................................................................................................................1-1
Audience.......................................................................................................................................................1-1
Support Information......................................................................................................................................1-1
What is in This Manual .................................................................................................................................1-1
Terminologies ...............................................................................................................................................1-2
Abbreviations of ATM....................................................................................................................................1-2
Safety Precautions (English)........................................................................................................................1-4
Précautions pour la sécurité (French)..........................................................................................................1-6
Chapter2. Introduction...................................................................................................................2-1
About the MX7600TA ...................................................................................................................................2-1
System Identification Label ..........................................................................................................................2-2
Chapter3. Installation Information.................................................................................................3-1
Installation Condition and Space..................................................................................................................3-1
Exterior .........................................................................................................................................................3-2
Access For Device........................................................................................................................................3-6
Service Area .................................................................................................................................................3-8
Chapter4. System Installation........................................................................................................4-1
Unpacking the ATM ......................................................................................................................................4-1
Installation Frame.........................................................................................................................................4-2
Remark.........................................................................................................................................................4-5
Notes .......................................................................................................................................Notes-1

Installation Manual Chapter1.Preface
© Nautilus Hyosung, Inc. All Rights Reserved. 1-1
Chapter1. Preface
Purpose
►This manual is produced to provide the guidelines for installers to comply with while
installing it.
►This manual describes how to prepare for and to proceed the installation of MX7600TA in
advance.
Audience
►This manual is for persons related to installing MX7600TAin branches of banks, such as
designers and construction workers of the branches and ATM installers, to work efficiently
and conveniently.
Support Information
►If any question or installation error occurs while preparing for and installing MX7600TA in
compliance with this manual, please contact maintenance staffs of Nautilus Hyosung. For
the contact of maintenance staffs of Nautilus Hyosung, see the E-mail addresses and
telephone numbers provided separately.
What is in This Manual
►MONiMAX referred to as “MX”
►This manual is designed to provide the installation guide for the MX7600TA and the
detailed description of the following:
▪Important Warnings
▪Information for installation
►All measurements in this manual are in inch scale with metric provided in braces
[ ].
►All information described in this manual is a licensed product of Nautilus
Hyosung.
Some of the information in this manual may differ according to the network processor
to be connected and may be subsequently updated by the bank’s needs or the
improvement by Nautilus Hyosung .
It is the policy of Nautilus Hyosung Inc. to improve products as new technology,

Installation Manual Chapter1.Preface
© Nautilus Hyosung, Inc. All Rights Reserved. 1-2
components, software, and firmware become available. Therefore Nautilus Hyosung
reserves the right to change specifications without notice.
Terminologies
►In this document the terminology listed below is used as follows:
▪Customer and consumer refer to any person who transacts business through the ATM.
▪Device and unit refer to the standard and optional ATM equipment, such as monitor,
card reader, printer and dispenser.
▪Fascia refers to the entire front portion of the unit, including the portion where the
customer transacts business.
▪Module refers to a plug-in device that can be serviced or replaced.
▪Note(s) and bill(s) refer to the individual documents loaded into and dispensed from the
dispenser.
▪Servicing and maintenance refer to the supervisor, operator and technician’s tasks
performed to keep the ATM operational.
▪Screen refers to the text appearing on the customer display.
Abbreviations of ATM
►In the manual the abbreviations listed below is used as follows:
#
Abbreviations
Description
1
AD board
Analog to Digital conversion board
2
ADA
The American Disabilities Act
3
ALG
Alignment Module
4
AP
Application Program
5
Assy
Assembly
6
BATT S/W
Battery Switch
7
BC
Bill Checker
8
BCA
Bulk Check Acceptor
9
BM1
Body Module1
10
BM2
Body Module2
11
BM3
Body Module3
12
BUNDLE
Bulk Note Separation Module
13
CAM
Camera Unit
14
CASSETTE
Cash & Check Cassette
15
CCIM
Cash & Check In Module
16
CCR
Contactless Card Reader

Installation Manual Chapter1.Preface
© Nautilus Hyosung, Inc. All Rights Reserved. 1-3
#
Abbreviations
Description
17
CDU
Cash Dispenser Unit
18
CE
Control Electronics
19
Earphone Jack
Voice Converter for Visually Disabled Persons (ADA)
20
EDU-P
Envelope Depository
21
EMV
Europay, Mastercard, Visa
22
EP
Elementary Program
23
EPP
Encryption PIN Pad
24
Escrow
Escrow Module
25
FELT
Ink Head Cleaner Felt
26
H/W
Hardware
27
I/F
Interface
28
ISO
International Standard Organization
29
JPR
Journal Printer
30
LCD
Liquid Crystal Display
31
MCU
Magnetic Card Unit
32
OPL
Operation Panel for Customers to Operate
33
OSD board
On Screen Display Board
34
P/S
Power Supply
35
PIN
Personal Identification Number
36
PNC
Panel Control Board
37
PRT
Endorsement Module
38
PTR
Printer (mainly Receipt Printer)
39
RECOG
Recognition Module
40
REJECT
Reject Module
41
RT/A6
Retract & A6 Cassette
42
S/W
Switch
43
SCM
Separator Control Module
44
SIU
Sensor and Indications Unit
45
SP
Service Provider
46
SPR
Slip Printer (Receipt Printer)
47
TTU
Text Terminal Unit (OPL or SPL)
48
VFD
Vacuum Fluorescent Display

Installation Manual Chapter1.Preface
© Nautilus Hyosung, Inc. All Rights Reserved. 1-4
Safety Precautions (English)
▶Common Safety Precaution
Precautions outlined this manual provide information on safe
and proper handling of the product. Non-compliance of the
precautions may result in injury or damage to the product.
This precaution symbol with sample term tells you safety
warnings during equipment handlings.
▶Please read the following instructions before operating equipment.
▪Operate equipment in the order outlined in this manual.
▪Follow precautions indicated in this manual, as well as the equipment itself.
Failure to properly address these precautions may lead to injury or damage to the
product.
▪Avoid operations not addressed in this manual.
▪If you cannot remedy system problems using the methods outlined in this manual,
please refer to contact information listed in the manual.
▪Any change or modifications in construction of this device which are not expressly
approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
<Note!>
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.
▶Description of Precaution Symbols
Symbol
Description
Electrical Shock Warning
▪Do not remove cover. Only a maintenance engineer is
allowed to open the cover.
▪Do not touch. You may receive electric shock.
▪Make sure to turn off the power when servicing the
equipment.
High Temperature Warning
▪Do not touch the equipment when it is running.
▪The equipment can get extremely hot and may cause a
burn.
▪Make sure to close the cover before running the
equipment.

Installation Manual Chapter1.Preface
© Nautilus Hyosung, Inc. All Rights Reserved. 1-5
Use Precaution when Moving
▪The equipment is heavy. Make sure at least 2 people lift or
move the equipment.
▪Do not attempt to move the equipment alone. You may be
injured from dropping the heavy equipment.
Fire Hazard
▪Place the equipment in an area away from any
combustible materials.
▪The equipment may catch on fire from overheating or short
circuit of the power supply unit.
Disassembly Warnings
▪Do not disassemble or modify the equipment unless you
are a certified engineer.
▪Contact the service center for maintenance, adjustments
and repairs.
▪Improper disassembly may cause fire or electrical shock.
Collapse Precautions
▪Do not place the equipment where the floor cannot sustain
the weight of the equipment, or on slanted or unstable
surface.
▪Equipment may fall and cause injury or damage.
Unplug the Equipment
▪Stop using the equipment immediately if it smokes, emits
an unusual smell, makes abnormal sounds, or if liquids or
other foreign materials enter the equipment.
▪If the above-mentioned abnormalities occur, immediately
turn off the power, unplug the equipment and contact the
service center.
▪If you ignore these symptoms, the equipment may catch on
fire or cause electric shock.
<CAUTION>
1. TO REDUCE THE RISK OF FIRE, USE ONLY No. 26 AWG OR LARGER
TELECOMMUNICATION LINE CORD
2. RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT
TYPE. DISPOSED OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
3. FOR PLUGGABLE EQUIPMENT, THE SOCKET-OUTLET SHALL BE INSTALLED
NEAR THE EQUIPMENT AN SHALL BE EASILY ACCESSIBLE
4. THE EQUIPMENT IS TO BE SECURED TO THE BUILDING STRUCTURE BEFORE
OPERATION

Installation Manual Chapter1.Preface
© Nautilus Hyosung, Inc. All Rights Reserved. 1-6
Précautions pour la sécurité (French)
►Précaution générale pour la sécurité
Précautions décrits de ce manuel fournissent des informations
sur une manipulation sûre et appropriée du produit. Le non-
respect des précautions peut causer des blessures ou
endommager le produit.
Ce symbole de précaution avec le terme d’example vous
indique des consignes de sécurité lors de la manipulation de
l'équipement.
►Veuillez lire des instructions suivantes avant d'utiliser l'équipement
▪Fonctionner l'équipement dans l'ordre indiqué dans ce manuel.
▪Suivre les précautions indiquées dans ce manuel, ainsi que l'équipement lui-même.
Le défaut de traiter correctement de ces précautions peut entraîner des blessures ou
endommager le produit.
▪Évitez des opérations non traitées dans ce manuel.
▪Si vous ne pouvez pas résoudre des problèmes du système en utilisant des méthodes
décrites dans ce manuel, veuillez se référer aux informations de contact figurant dans
le manuel, s’il vous plaît.
▪Certain changement ou des modifications dans la construction de ce dispositif qui ne
sont pas expressément approuvés par la partie responsable de la conformité
pourraient annuler l'autorité de l'utilisateur de faire fonctionner l'équipement.
<REMAQUE!>
Cet équipement a été testé et fondé pour se conformer aux limites pour un équipement
numérique de classe A, conformément à la partie 15 des règles FCC. Ces limites sont
conçues pour fournir une protection raisonnable contre des interférences nuisibles
lorsque l'équipement est utilisé dans un environnement commercial. Cet équipement
génère, utilise et peut émettre des fréquences radios et, s'il n'est pas installé et utilisé
conformément aux instructions de ce manuel, peut causer des interférences nuisibles
aux communications radios.
Le fonctionnement de cet équipement dans une zone résidentielle est susceptible de
provoquer des interférences nuisibles dans le cas, l'utilisateur devra corriger ces
interférences à ses propres frais.
►Description des symboles de précaution
Symbole
Description
Choc électrique
• Ne pas retirer le couvercle. Seul le technicien d'entretien est
autorisé à ouvrir
le couvercle.
• Ne pas toucher. Vous pouvez avoir un choc électrique.
• Assurez-vous d'éteindre l'appareil lors de l'entretien de
l'équipement.

Installation Manual Chapter1.Preface
© Nautilus Hyosung, Inc. All Rights Reserved. 1-7
À haute temperature
• Ne pas toucher l’équipement quand il est en marche.
• L’équipement peut devenir extrêmement chaud et peut
provoquer une brûlure.
• Assurez-vous de fermer le couvercle avant de lancer
l'équipement.
Soyez prudent lors du déplacement
• L'équipement est lourd. Assurez-vous d'au moins 2
personnes pour soulever ou déplacer l'équipement
• N'essayez pas de déplacer l’équipement seul. Vous pouvez
être blessés par la chute de l'équipement lourd.
Risque d'incendie
• Placer l’équipement dans une zone éloignée de tous les
matériaux combustibles.
• L'équipement peut s'enflammer de surchauffe ou de court-
circuit de l'unité d'alimentation.
Démontage
• Ne pas démonter ou de modifier l'équipement, sauf si vous
êtes ingénieur certifié.
• Contacter le centre de service pour l'entretien, le réglage et
la réparation.
• Le mauvais démontage peut provoquer un incendie ou un
choc électrique.
Tomber
• Ne pas placer l'équipement dont le sol ne peut pas
supporter le poids de l'équipement, ou sur une surface
inclinée ou instable.
• L'équipement peut tomber et provoquer des blessures ou
des dommages.
Débrancher l'équipement
• Cessez d'utiliser l’équipement immédiatement si il fume,
émet une odeur inhabituelle, fait des bruits anormaux ou si
des liquides ou d'autres matériaux étrangers dans
l'équipement.
• Si les anomalies mentionnées ci-dessus se produisent,
éteignez immédiatement la puissance, débranchez
l'appareil et contactez le centre de service.
• Si vous ignorez ces symptômes, l’équipement peut prendre
feu ou provoquer un choc électrique.
AVERTISSEMENT :
1. POUR RÉDUIRE LES RISQUES D'INCENDIE, UTILISEZ UNIQUEMENT AWG n °26
OU LA LIGNES DE TELECOMMUNICATION PLUS GROSSE
2. RISQUE D'EXPLOSION SI LA BATTERIE EST REMPLACEE PAR UN TYPE
INCORRECT. DISPOSER POUR UTILISATION DES BATTRIES SELON LES
INSTRUCTIONS
3. POUR LES APPAREILS RACCORDES, LA PRISE DOIT ETRE INSTALLEE PRES
D’EQUIPEMENT POUR ÊTRE FACILEMENT ACCESSIBLE
4. L’EQUIPEMENT DOIT ETRE SECURISE A LA STRUCTURE DU BATIMENT AVANT
D'UTILISER

Installation Manual Chapter2. Introduction
© Nautilus Hyosung, Inc. All Rights Reserved. 2-1
Chapter2. Introduction
About the MX7600TA
►MX7600TA is designed to meet the everyday demands of immediate cash needs for
individuals with a compact size to fit in virtually any place. ThisAutomated Teller Machine
(ATM) is connected to a network processor to verify accounts and any other inquires
through the insertion of a customer’s card. MX7600TA is easy to use, easy to service and
able to support customer’s needs.
►The benefits that the new concept MX7600TAprovides are as follows.
Removes inconvenience which occurs when bank clerks directly handle cash with
customers and relieves workload upon tellers by processing withdrawal of cash
automatically.
Allows tellers to calculate and close amount faster than the existing manual calculation.
Allows easy and quick installation and maintenance.
<Note!>
The figures/photos/diagrams in this manual are for well understanding therefore they may
be different from real machines.

Installation Manual Chapter2. Introduction
© Nautilus Hyosung, Inc. All Rights Reserved. 2-2
System Identification Label
▶The System Label below shows the layout of the product identification label which is fixed
inside the ATM

Installation Manual Chapter3. Installation Information
© Nautilus Hyosung, Inc. All Rights Reserved. 3-1
Chapter3. Installation Information
Installation Condition and Space
►When you determine the location of your ATM, ensure that the physical environment,
including the temperature and humidity, meets the requirements. Following conditions
should be met before installing equipment.
1. Avoid locations where intense direct sunlight is reflected off the LCD screen.
2. Avoid locations where strong static electricity can occur.
3. The ATM should be mounted on concrete or other nonflammable surface only.
4. The floor must allow easy wheelchair access from the front or the side.
5. Space required for servicing the machine should be considered before installation..

Installation Manual Chapter3. Installation Information
© Nautilus Hyosung, Inc. All Rights Reserved. 3-2
Exterior
►Front Elevation

Installation Manual Chapter3. Installation Information
© Nautilus Hyosung, Inc. All Rights Reserved. 3-3
►Side Elevation –10”Collar Adapter
►Side Elevation –15”Collar Adapter

Installation Manual Chapter3. Installation Information
© Nautilus Hyosung, Inc. All Rights Reserved. 3-4
►Plan View - 10”Collar Adapter
►Plan View - 15”Collar Adapter

Installation Manual Chapter3. Installation Information
© Nautilus Hyosung, Inc. All Rights Reserved. 3-5
►ISO View - 10”Collar Adapter
►ISO View - 15”Collar Adapter

Installation Manual Chapter3. Installation Information
© Nautilus Hyosung, Inc. All Rights Reserved. 3-6
Access For Device
►Access For Device - 10”Collar Adapter

Installation Manual Chapter3. Installation Information
© Nautilus Hyosung, Inc. All Rights Reserved. 3-7
►Access For Device - 15”Collar Adapter

Installation Manual Chapter3. Installation Information
© Nautilus Hyosung, Inc. All Rights Reserved. 3-8
Service Area
►General View