Gigabyte GSmart i350 User manual

Getting Started
◎It may take up to several minutes for the GPS receiver to lock on 3 satellites as you first initialize
the positioning. The location information will be kept in memory and will be available the next
time you launch the process, which will save the acquisition time down to no longer than 1
minute.
◎Please avoid using GPS applications in the following environments as GPS signals are weak:
1. Surrounded by tall high-density buildings
2. Indoor
3. In the basement
4. Under the viaduct
5. In the tunnel
6. In the vehicle equipped with metal-coated windshields
7. Under tree canopy
◎The initializing and functioning of GPS receiver will cause higher power consumption of this
device. Please keep watch for the battery status once you have turned on the GPS applications.
◎While GPS application is in use, an GPS status icon will appear on top of Today screen;
meanwhile, the LED on front top of screen will blink in White.
GPS Tracking
GPS Tracking not only keeps the records of your travel routes, but also preserves the memorable
landmarks during your trip. You can share with friend these routes and landmarks containing
photos and notes through online geographic tools such as Google Earth!
How to Use GPS Tracking
1. Tap Start > Programs > GPS Utility > GPS Tracking
2. Tap to start tracking as soon as GPS Status indicates “GPS Located”.
Strong GPS signal reception.
Tap to open GPS pop-up
menu.
Detecting GPS satellite
signals.reception. Tap to open
GPS pop-up menu.
Tap “X” or “Hide” to return to Today
screen, tracking will be running
while you are using other
applications
Tap ”Close” to terminate this
application and GPS positioning

As you start GPS Tracking, the application will begin to trail the route you are taking. You can
4
3.
observe the “Total Distance” and “Speed” of your current trip on GPS Tracking screen.
. During the trip, you can always tap to add a landmark for a specific site.
to end tracking and proceed to save the track.
5. Tap
Tip: You may add a landmark anytime without initializing GPS tracking as long as your GPS
the Name, Description or take a photo with i350’s built-in camera.
＊
Status shows “GPS Located”!
Adding a Landmark
To edit a landmark, you may input
Tap to add a photo for this landmark.
beg
Start Tracking: Tap to
apin recording your track. T
to pause recording.
Clear Record：Tap to clear
this track.
Add Landmark: Tap to add
a new landmark .
Info: Tap to view more
inf ormation about this trip,
such as number of satellites
connected.
Stop Tracking: Tap to end
tracking, and proceed to save
the track.
After taking the photo, you
or
Save
Cancel
can review the photo and
choose whether to save it f
the landmark.

Saving Tracks
You will enter Save screen as soon as the tracking stops. To edit this track profile, you may input
Start Point, Destination, File Name and select where you would like to save this file.
Save
Cancel
Note
◎A single track or landmark file will be saved as both .kmz and .gpx formats in the storage location
you selected.
◎The photos included in a .kmz file will be duplicated and saved as .jpg format in the folder where
i350’s built-in camera keeps its taken images.
Get your journey photo-mapped!
Please download and install the free-of-charge program-Google Earth from the website
http://earth.google.com/
Load the .kmz file produced by
i350 with Google Earth to
review your journey.
The photo you took for a specific
landmark will pop up when you
click on the site.
Note:
The photos (.jpg) created by using “Add Landmark” will include the GPS information to its EXIF tag.
You may upload these photos to Geotagged photos-supported web blogs such as Flickr and
Mappr.