Gigabyte Gv-n4464d User manual

GV-N4464D/ GV-N4464T/

GV-N4464T-P

User's Manual

GeForce™4 MX440-8X Graphics Accelerator

Rev. 101

12MD-N4464-101

any from without the expressed, written permission of GBT.

Trademarks

Third-party brands and names are the property of their respective owners.

Notice

Please do not remove any labels on motherboard, this may void the warranty of this motherboard.

Due to rapid change in technology, some of the specifications might be out of date before publication of this booklet.

The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make

a commitment to update the information ontained herein.

GV-N4464 Series Graphics Accelerator - 2 -

English

Table of Contents

1. Introduction ......................................................................................... 3

1.1. Features ..................................................................................................... 3

1.2. Minimum system requirement .................................................................... 3

2. Hardware Installation........................................................................... 4

2.1. Unpacking .................................................................................................. 4

2.2. Board layout ............................................................................................... 5

2.3. Hardware installation .................................................................................. 8

3. Software Installation .......................................................................... 10

3.1. Win®XP driver and utilities installation ..................................................... 10

3.1.1. Operating system requirement ..................................................................... 10

3.1.2. DirectX installation ........................................................................................ 11

3.1.3. Driver installation .......................................................................................... 13

3.1.4. Utilities on driver CD ..................................................................................... 15

3.1.5. Taskbar icon ................................................................................................. 17

3.1.6. Display properties pages .............................................................................. 20

3.1.7. nView properties pages ................................................................................ 25

3.2. Win®98/98SE / Win®2000 / Win®ME driver installation ........................... 29

3.3. BIOS flash utility ....................................................................................... 29

4. Troubleshooting Tips ......................................................................... 30

5. Appendix ...........................................................................................31

5.1. How to reflash the BIOS ........................................................................... 31

5.2. Resolutions and color depth table (In Windows®XP) ............................... 32

Introduction- 3 -

English

1. Introduction

1.1. Features

•Powered by NVIDIA®GeForce™4 MX440-8X Graphics Processing Unit (GPU)

•Supports AGP 8X/ 4X/ 2X/ 1X

•275MHz core clock and 500MHz DDR memory clock speed

•64MB DDR memory accelerates the latest 3D games

•64-bit memory interface

•2-pixel pipeline architecture

•Supports DirectX 8.1

•Supports TV-Out connector

•Supports DVI-I connector (For GV-N4464D only)

1.2. Minimum system requirement

•IBM®or 100% PC compatible with Pentium®III 650MHz or AMD Athlon 650MHz

class processor or higher

•One available AGP3.0 compliant slot or better

•Operating Systems Win®98/98SE / Win®2000 / Win®ME / Win®XP

•64MB system memory

•50MB of available disk space for full installation

•CD-ROM or DVD-ROM drive

GV-N4464 Series Graphics Accelerator - 4 -

English

2. Hardware Installation

Expansion cards contain very delicate Integrated Circuit (IC) chips. To protect

them against damage from static electricity, you should follow some precautions

whenever you work on your computer.

1. Turn off your computer and unplug power supply.

2. Use a grounded wrist strap before handling computer components. If you do not have one,

touch both of your hands to a safely grounded object or to a metal object, such as the power

supply case.

3. Place components on a grounded antistatic pad or on the bag that came with the

components whenever the components are separated from the system.

The card contains sensitive electric components, which can be easily damaged by static

electricity, so the card should be left in its original packing until it is installed.

Unpacking and installation should be done on a grounded anti-static mat. The operator should

be wearing an anti-static wristband, grounded at the same point as the anti-static mat.

Inspect the card carton for obvious damage. Shipping and handling may cause damage to

your card. Be sure there are no shipping and handling damages on the card before proceeding.

DO NOT APPLY POWER TO YOUR SYSTEM IF IT HAS BEEN DAMAGED ON THE CARD.

In order to ensure your graphics card working correctly, please use official Gigabyte

BIOS only. Use none official gigabyte BIOS might cause problem on the graphics

card.

2.1. Unpacking

The GV-N4464 Series package contains the following:

The GV-N4464D, GV-N4464T or GV-N4464T-P graphics accelerator

GV-N4464 Series user's manual

NVIDIA Series driver and utility CD

Power DVD CD

S-video cable x 1

DVI-I to D-Sub connector (For GV-N4464D only)

Hardware Installation- 5 -

English

2.2. Board layout

1) GV-N4464D

TV-out

VGA Monitor

Connector

(15pin)

DVI-I Connector

NTSC / PAL TV

Projector

Analog LCD Monitor Analog Monitor

VGA Output

AV Output

S-VideoOutput

Analog LCD Monitor

Digital LCD Monitor

DVI Output

DVI-I to D-Sub Connector

VGA Output

TV-Out

VGA Monitor

Connector

(15pin)

DVI-I Connector

GV-N4464 Series Graphics Accelerator - 6 -

English

2) GV-N4464T

TV-Out

VGA Monitor

Connector

(15pin)

TV-out

VGA Monitor

Connector

(15pin)

AV Output

NTSC / PAL TV

Projector

S-VideoOutput

Analog LCD Monitor Analog Monitor

VGA Output

Hardware Installation- 7 -

English

3) GV-N4464T-P

TV-Out

VGA Monitor

Connector

(15pin)

S-Video

TV-out

VGA Monitor

Connector

(15pin)

AV Output

NTSC / PAL TV

Projector

S-Video Output

Analog LCD Monitor Analog Monitor

VGA Output

S-Video Connector

AV Output

NTSC / PAL TV

GV-N4464 Series Graphics Accelerator - 8 -

English

2.3. Hardware installation

Installing Your graphics card.

Now that you have prepared your computer, you are ready to install your graphics

accelerator card.

To install your graphics accelerator card:

1. Power off the computer and monitor, then

disconnect the display cable from the back

of your computer.

2. Remove the computer cover. If necessary,

consult your computer's manual for help

in removing the cover.

3. Remove any existing graphics card from

your computer.

Or, if your computer has any on-board

graphics capability, you may need to

disable it on the motherboard. For more

information, see you computer

documentation.

Hardware Installation- 9 -

English

4. Locate the AGP slot. If necessary, remove

the metal cover from this slot; then align

your graphics card with the AGP slot, and

press it in firmly until the card is fully eated.

5. Replace the screw to fasten the card in

place, and replace the computer cover.

6. Plug the display cable into your card; then

turn on the computer and monitor. If your

graphics card came with a DVI connector,

you can connect a flat panel display to the

appropriate connector, as shown below...

You are now ready to proceed with the installation of the graphics card driver. For detailed

instructions, select your operating system from the list below.

To TV or VCR

To VGA Monitor

AGP slotGraphics card

To Flat Panel Display

(For GV-N4464D only)

S-Video

(For GV-N4464T-P only)

GV-N4464 Series Graphics Accelerator - 10 -

English

3. Software Installation

In this manual, we assume that your CD-ROM Drive letter to be Drive D:

The installation of Win®98/98SE / Win®2000 / Win®ME / Win®XP drivers is very simple.

When you insert the driver CD into your CD-ROM drive, you can see the AUTORUN

window (if it does not show up, run "D:\setup.exe"). Then you can follow the guides to

setup your graphics card driver. (Please follow the subsection 3.1.3 "Driver installation"

to install the driver for your graphics accelerator.)

3.1. Win®XP driver and utilities installation

3.1.1. Operating system requirement

•When loading the graphics card drivers for the system, please make sure your

system has installed DirectX 8 or later version.

•If you install the graphics card drivers for the motherboard, which consist of SIS,

ALI or VIA chipsets, please install the appropriate driver program for that

motherboard. Or please contact your motherboard nearest dealer for motherboard

driver.

This manual suits for next models

Table of contents

Gigabyte GV-N4464D User manual

Popular Video Card manuals by other brands