Heating coffee
a Close the lid and rock it.
b Insert the plug into appropriate outlet. Switch ON the power switch. The coffee maker
is heating now, the heating lamp light on.
Note: Do not open the lid when the coffee maker is heating.
Keep warm coffee
When the temperature of the water reach about 1850F, it show that the coffee is brewed
now. The coffee maker will switch to keep warm automatically, and keep the coffee inside
in a suitable temperature. The keep warm lamp light on.
After using
Unplug the coffee make after using or you do not want to keep warm the brewed coffee.
CARE AND MAINTENACE
1. Switch off the appliance and remove the plug from the electrical socket.
2. Allow it to cool completely before you begin cleaning.
3. Clean the shell with a damp cloth.
4. Clean the lid, the coffee filter. water pipe with warm water.
5. Pull some clean water into the pot, clean the inside surface and the heating element
gently with a soft brush. Note: Clean the heating element after each use.
6. Clean the inside of body carefully with a soft sponge and clear water. Rinse out with
clear water, and let the water rinse out through the tap, in order to be certain that it is
clean.
7. Wipe the inside of body dry with a soft, dry towel.
8. Wipe outer surface of the appliance.
9. Before putting the appliance away for storage, allow all parts to dry completely.
10. For hygienic reasons, always store the appliance with its lid removed!
CAUTION:
zDo not submerge the device in water or rinse it with running water.
zDo not use any solvents or abrasive cleaning agents.
zThe appliance is not suited for cleaning in a dishwasher.
www.Ginnys.com
REMEDYING ERRORS/DISTURBANCES
Problem Possible Cause Solution
Move the tap into
the CLOSE position.
During the heating
process, liquid
outflow
The tap is set to the
DISPENSE position.
Only fill the container up
to the max. filling point.
The appliance
does not function.
Plug not connected to
electrical socket?
Appliance not switched
on?
Check to see if the mains cord has
been plugged in, if the appliance has
been switched on.
DE-SCALING
To ensure your appliance continues to make good coffee or wine or tea, you should
occasionally de-scale the mineral residue left by water using a de-scaling product
specifically formulated for coffeemakers. The frequency of this operation will depend on
the hardness of the water in your area and on how often you use your coffee maker. If you
use it once or twice a day, use the following as a guideline:
zSoft water: de-scale twice a year.
zMedium hard water: de-scale 4 times a year.
zVery hard water: de-scale monthly.
Use a standard de-scaling agent sold for coffeemakers according to the application
instructions or use a mixture of 1/2 vinegar and 1/2 water. Pour de-scaling mixture into the
reservoir, and switch on appliance. When de-scaling liquid has passed through completely,
empty carafe and pour out hot liquid. Never pour hot de-scaling solution into the water
container. Process may need to be repeated due to the hardness of your water.
Attention: After de-scaling it is necessary to operate the appliance 2-3 times with a full
container of fresh water as done before the first use. No guarantee is assumed for
damages that are due to disregard of the de-scaling instructions.
POLARIZED PLUG
This appliance has a polarized plug (one blade is wider than the other). As a safety feature
to reduce the risk of electrical shock, this plug is intended to fit a polarized outlet only one
way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact
a qualified electrician. Do not attempt to defeat this safety feature.
3 4
