GivEnergy Giv-AC3.0 User manual
GivEney ®
GivEnergy ®
AC
MANUAL
GivEnergy ®
T
I
K
:
+
:
@
:
'
',
,
,
:
:
:
Contents
11
11 13
13
17
17
17
17
GivEnergy ® GivEnergy ®
�
&
&
&
Lethal voltages are present within the unit and on the power supply lines.
Therere, only authorized electricians may install and open the unit. Even when
the unit is disconnected, high contact voltages may still be present within the unit.
Danger Of Burn Injuries Due To Hot Enclosure Parts!
During operation, the four sides of the enclosure lid and the heat sink may
become hot.
Only touch the front enclosure lid during operation.
ANo one should be opening the unit
Knowledge of how an inverter works and is operated
Instruction in how to deal with the dangers and risks associated with installing and using
electrical devices
Training in the installation and commissioning of electrical devices and plants
Knowledge of all applicable standards and guidelines
Knowledge and observance of this manual and all safety instructions
GivEnergy ®
3
Figure 1
•
K
F
GivEnergy ®
4
Training in the installation and commissioning of electrical devices and plants
Knowledge of ALL applicable standards and guidelines
The unit is bidirectional which is connected to the battery storage system and grid. It will
also work in conjunction with an existing solar system.
Energy produced by the P
V
system is used to optimise self
-
consumption. Excess energy is
used to charge the batteries (via this AC coupled unit) and once they are full, this excess
energy is then fed into the public grid whilst the P
V
energy is sufficing.
When P
V
energy output is insufficient to support connected loads, the AC coupled system
automatically draws energy from the batteries (whist sufficient battery capacity is available)
to feed the load. If the battery capacity is insufficient to meet own consumption
re
q
uirements, electricity will be drawn from the public grid.
c
c
° °
q
GivEnergy ®
4 Unpacking
B c
D E F G H I J
r
c
J
GivEnergy ®
6
5 Installation and Electrical Connection
5.1 Safety
IEE
j
GivEnergy ®
7
5.2 Selecting The Installation Location
°
j
°
x x x
GivEnergy ®
8
/
30CM
J
l l l l l l l l l l l l l l l l l l
GivEnergy ®
9
Ambient Dimensions Using Inverters in Series
5.3 Mounting The Inverter With Bracket
Fix The Brackets with 4 PCS
M6x50 Expansion Bolts
336mm
E
E
]
Hook on the upside
GivEnergy ®
10
c
Figure 13
INVERTER
Grid
5.6.3 Connect To The Grid (AC Utility)
I
I
'
'
PE
ommo
$
oe
GivEnergy ®
2
5.6.4 Connect To The Back-Up
GivEnergy ®
5.6.5 Connect To The Battery
2
c
Follow the below steps to implement the battery connection:
I D
Danger to life due to voltages!
GivEnergy
5.6.6 Connect CT Clamp or Mid Approved Meter To Inverter
+
INVERTER
. ...
GivEnergy
16
6 The Inverter Para meter Setting
7 Communications
7.1 Wi-Fi/GPRS
7.2 The DRMO Function for SAA Certification
/ �I!
I ml /
-0----o"
I
GivEnergy ®
8 Start-Up and Shut Down Of The Inverter
8.1 Start-Up The Inverter
8.2 Disconnecting The Inverter
9 Maintenance and Cleaning
9.1 Checking Heat Dissipation
9.2 Cleaning The Inverter
9.3 Checking The DC Switch
GivEnergy ®
10 Decommissioning
10.1 Dismantling The Inverter
10.2 Packing The Inverter
10.3 Storing The Inverter
°°
GivEnergy ®
19
11 Work Modes
12 Manufacturer Warranty
This inverter is covered by a 5-year warranty. Completion of the on line registration certificate validates a
standard factory warranty of 5 years from the date of commission.
GivEnergy ®
Other manuals for Giv-AC3.0
1
Table of contents
Other GivEnergy Inverter manuals
