Glacier bay 5348WWHD User manual

THANK YOU
We appreciate the trust and condence you have placed in Glacier Bay through the purchase of this linen tower.
We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products
available for your home improvement needs. Thank you for choosing Glacier Bay!
USE AND CARE GUIDE
LINEN TOWER
Questions, problems, missing parts?
Before returning to the store, call Glacier Bay Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday
1-855-HD-GLACIER
HOMEDEPOT.COM/GLACIERBAY
Item #1004 101 742, 1004 101 731
Model #5348WWHD, 5348GYHD

2
Table of Contents
Safety Information
Table of Contents ...................................2
Safety Information ..................................2
Warranty ..........................................2
Pre-Assembly ......................................3
Planning Assembly.................................3
Package Contents .................................6
Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Installation .......................................21
Care & Cleaning ...................................22
□Read through this entire manual prior to assembly and installation.
□It is imperative that unit be fastened to the wall for safety reasons.
Warranty
ONE YEAR LIMITED WARRANTY
WHAT IS COVERED
Glacier Bay products are manufactured with superior quality standards and workmanship and are backed by our limited lifetime warranty.
Glacier Bay products are warranted to the original consumer purchaser to be free of defects in materials or workmanship. We will replace
FREE OF CHARGE any product or parts that proves defective. Simply return the product/part to any of The Home Depot retail locations or
call 1-855-HD-GLACIER to receive the replacement item. Proof of purchase (original sales receipt) from the original consumer purchaser
must be made available for all Glacier Bay warranty claims.
WHAT IS NOT COVERED
This warranty excludes incidental/inconsequential damages and failures due to misuse, abuse, or normal wear and tear. This warranty
excludes all industrial, commercial and business usage, whose purchasers are hereby extended a ve year limited warranty from the date
of purchase, with all other terms of this warranty applying except the duration of warranty.
Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations
may not apply to you. This warranty gives you specic legal rights and you may also have other rights that vary from state to state and
province to province. Please see a store or contact 1-855-HD-GLACIER for more details.
Serious or fatal crushing injuries can occur from
furniture tip-over. To help prevent tip over:
• Install tip-over restraint provided.
• Place heaviest items on the lowest surfaces as far
back from the front edge as possible.
• Do not set TVs or other heavy objects on top of this
product, unless the product is specically designed
to accommodate them.
• Never allow children to climb or hang on drawers,
doors, or shelves.
Use of tip-over restraints may only reduce, but not
eliminate the risk of the tip over.
This is a permanent label. Do not attempt to remove!
WARNING
CAUTION: Before cutting, drilling, or hammering into any wall
surface, verify the location of electrical, plumbing, and gas lines.
Cutting any of these may cause serious injury.

3 HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.
Pre-Assembly
PLANNING ASSEMBLY
□Identify all parts and hardware pieces before you begin.
□When laying out parts, place them on a soft surface to prevent scratching.
TOOLS REQUIRED
Phillips
screwdriver Hammer Pencil Drill
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Some of the hardware offered may be more than needed,
please keep them as spare parts.
AA Cam bolt x 12
BB Cam x 12
CC Short dowel x 12
DD Long dowel x 4
EE Wood screw x 8
FF Foot screw x 4

4
[Heading goes here]
Pre-Assembly (continued)
HARDWARE INCLUDED (continued)
NOTE: Hardware not shown to actual size.
Some of the hardware offered may be more than needed,
please keep them as spare parts.
GG Door handle x 1
HH Door handle screw x 2
II Hinge x 2
JJ Hinge screw x 8
KK Magnet x 1
LL Magnet screw x 2
MM Magnet strike x 1
NN Magnet strike screw x 1
OO Shelf pin x 12

5 HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.
[Heading goes here]
Pre-Assembly (continued)
HARDWARE INCLUDED (continued)
NOTE: Hardware not shown to actual size.
Some of the hardware offered may be more than needed,
please keep them as spare parts.
PP Cam cover x 12
QQ Mounting screw x 2
RR Wall anchor x 2
SS Spacer x 2
TT Washer x 2
UU Nail x 16
VV Hex wrench x 1

6
Pre-Assembly (continued)
PACKAGE CONTENTS
A Top Panel x 1
B Top Left Side Panel x 1
C Top Right Side Panel x 1
D Fixed Shelf x 1
E Bottom Left Side Panel x 1
F Bottom Right Side Panel x 1
G Bottom Panel x 1
H Hanging Rail x 2
I Door x 1
J Foot x 4
K Back Panel x 1
LAdjustable Shelf x 3
H
E
D
A
K
G
I
L
L
F
B
C
H
L
J
J

7 HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.
Assembly (continued)
1Attaching the hinges
□Attach the hinges (II) to the bottom right side panel (F) using
the hinge screws (JJ).
□Attach the magnet (KK) to the bottom left side panel (E) using
the magnet screws (LL).
□Attach the cam bolts (AA) to the side panels (E and F).
□Insert cams (BB) to the side panels (E and F) and note the
direction of the arrow on the cams (BB), as shown.
arrow direction
F
BB
LL
II
JJ
E
KK
AA
JJ
BB
BB
II

8
Assembly (continued)
2Inserting cams into the hanging rails
□Insert cams (BB) into the hanging rails (H) and note the direction
of the arrow on the cams (BB), as shown.
arrow direction
H
BB
BB arrow direction
H

9 HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.
Assembly (continued)
3 Attaching the bottom panel
□Insert the short dowels (CC) into the hanging rail (H) and
attach to the side panels (E and F).
□Insert short dowels (CC) into the side panels (E and F) and
then attach the bottom panel (G) to the side panels (E and F)
using the wood screws (EE), as shown.
□Tighten the cams (BB) by turning them clockwise until
snug, do not overtighten cams (BB).
E
F
H
G
EE
EE
CC
EE
CC
CC
BB

10
[Heading goes here]
4Attaching the feet
□Using the hex wrench (V V ), attach the feet (J) to the
bottom panel (G) using the foot screws (FF), as shown.
Do not overtighten the foot screws (FF).
Assembly (continued)
G
J
J
J
J
FF
FF