Glacier bay 4332F User manual

Questions, problems, missing parts? Before returning to the store,
call Glacier Bay Customer Service
8 a.m. - 7 p.m. Monday - Friday EST and Saturday 9 a.m. - 6 p.m.
4332F
1005126669
We appreciate the trust and confidence you have placed in Glacier Bay through the purchase of this sink. We strive to
continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing Glacier Bay!

13
5
4
2
2
2
Glacier Bay products are manufactured with superior quality standards and workmanship and are backed by our limited lifetime warranty.
Glacier Bay products are warranted to the original consumer purchaser to be free of defects in materials or workmanship. We will replace
FREE OF CHARGE any product or parts that proves defective. Simply return the product / part to any The Home Depot retail locations or call
1-855-HD-GLACIER to receive the replacement item. Proof of purchase (original sales receipt) from the original consumer purchaser must
be made available for all Glacier Bay warranty claims.
This warranty excludes incidental/inconsequential damages and failures due to misuse, abuse or normal wear and tear. This warranty
excludes all industrial, commercial, and business usage, whose purchasers are hereby extended a five year limited warranty from the date
of purchase, with all other terms of this warranty applying except the duration of warranty.
Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations may not
apply to you. This warranty gives you specific legal rights. You may also have other rights that vary from state to state and province to
province. Please see a store or contact 1-855-HD-GLACIER for more details.
Please carefully read this guide before installing or using this
product. Store this guide in a safe place for future reference.

Before installation, verify the cabinet clearance:
PLANNING INSTALLATION
TOOLS REQUIRED
HARDWARE INCLUDED
Compare all parts with the Hardware Included and Package Contents lists in this manual. Check the surface of the sink for any flaws or
damage, including dents, bends, bumps, or scuff marks. If any damage is noticed or parts are missing, do not proceed with the
installation.Contact the Customer Service Team at 1-855-HD-GLACIER or visit www.HomeDepot.com/glacierbay.
NOTE: This sink is a topmount (from above the counter)
installation.
NOTE: Under mount clips not included. If you are installing this sink as an under mount, please contact
NOTE: Hardware not shown to actual size.
a professional installer or contact us at 1-855-HD-GLACIER to determine the type of clip needed.

D
E
FH
G
I
Faucet
Strainer
Cutting board
Sink basket
Rolling grid
Grid
T
Strainer cover
1
C
2
3
4
5
6
7
8
PACKAGE CONTENTS
J
Sink Cap for Soap Dispenser Hole
J

1 2
Preparing the countertop Cutting the installation hole
Center the template (B) on the counter so that it is parallel to
the counter edge and that the installation hole will not
interfere with the structure of the cabinet.
Tape the template (B) to the countertop to keep it in place
and trace the cutout line on the template (B) With a pencil.
Drill a pilot hole and cut the countertop opening. Use the
appropriate cutting tool for the surface you are cutting.
You can choose to install this sink over your countertop (Type 1: Top mount) or under your countertop (Type 2: Undermount)
according to your taste and needs.
Top mount Installation

4
3
Installing the faucet assembly
Preparing the sink
D
6
Place the sink (A) into the installation hole to verify the fit. Adjust the cutout if necessary.
Install the strainer assembly as these steps describe. It is easier to install the strainer assembly to the sink before the sink is installed to
the cabinet.
Apply a small amount of plumbers putty (not included) in the notch around the drain hole of the sink (A) .
Place the strainer ring (3) on top of the drain hole in the sink (A).
Insert the screener (1) into the bowl (2) and place this assembly into the drain hole in the sink (A).
From underneath the sink (A), place the rubber washer (4), paper washer (5), locknut (6), plastic joint (7), and connecting nut (8) over
the drain hole in the sink (A).
Tighten the locknut (6) and connecting nut (8) to hold the strainer assembly securely in place.
Shut off the water supply.
Insert the faucet assembly (D) through the hole in the sink.
11
33
66
77
88
55
44
2
2
CAUTION: Always shut off the water supply before removing an existing faucet or
replacing any part of a faucet. Open the faucet handle to relieve water pressure and
ensure that the water is completely shut off.
Top Mount Installation (Continued)

5
7
6
Securing the faucet assembly
Installing the sink
rotate the clips
21
Sink
Push
up
21
1 1
Push
up 21
2
3
3
Sink
21
Sink
Continue to push up
and turn clockwise
to tighten
From underneath the sink, secure the faucet assembly to the
sink with the FastmountTM system (21). Push the FastmountTM
system (21) up over the threads until it stops against the
bottom of the sink, then hand turn (clockwise) to tighten.
Apply silicone sealant (not included) around the underside and lip of the sink (A).
Carefully lower the sink (A) into the counter.
Rotate the clips. Tighten the screws on the top mount clips (AA) evenly until the
sink (A) is flush with the counter. Do not overtighten.
Wipe excess sealant with a rag.
Optional sink cap (J) will be available to fill the hole if the soap
dispenser or other equipment is not installed.
Top Mount Installation (Continued)
J

Attaching the quick connector
to the receiving block
7 8
9
8
9
18
Weight
here
Weight
here
20
20
19
19
2
1
Installing the weight
Install the weight clip (20) at the point of the hose marking "weight
here”.
Insert the weight (19) onto the clip (20) by sliding it down onto the
clip (20).
Push the quick connector (18) firmly upward and attach it to
the receiving block (9). Pull down moderately to ensure the
connection has been made.
Making the water supply
connections
Thread the nut (1) on the supply line onto the outlet of
the water supply valve (2) and tighten with a wrench. Do
not overtighten.
NOTE: The hot side inlet tube is indicated by a label. Avoid
twisting wires together or placing the wires close to each
other and damaging.
Top Mount Installation (Continued)

Flushing and checking for leaks 11
9
10
Removing the quick connector
If it is necessary to remove the quick connector (1), squeeze
the tabs (2) on the quick connector and then pull down to
disconnect.
Squeeze
Pull
down
1
1
2
12 Installing the accessories
Pull the hose assembly out of the spout and remove
the spray head by unscrewing it from the hose in a
counterclockwise direction. Be sure to hold the end of
the hose down into the sink and turn the faucet to the
warm position where it mixes hot and cold water.
Flush the water lines for one minute. This flushes
away any debris that could cause damage to internal
Re-tighten any connections if necessary, but do not
overtighten. Reinstall the spray head by hand tightening
it back onto the spray hose in a clockwise direction.
When finished, place the sink grid (H), cutting board (E),
basket (F), rolling grid (G) and strainer cover (I) into the sink.
D
I
E
F
H
G
IMPORTANT: After installation is completed, turn on
the hot and cold water supplies. Check for leaks.
Top Mount Installation (Continued)

12
Preparing the countertop Cutting the installation hole
Check the template (A) and select the cutline you want: line A1
is bowl size; line A2 is 1/2 wider than bowl size. If you choose
line A1 or A2, tear off the template through the broken line.
Place the template (A1 or A2) on the countertop. Ensure the
template is centered on the counter so that it is parallel to the
counter edge and that the installation hole will not interfere
with the structure of the cabinet. Tape the template (A1 or A2)
to the countertop to keep it in place and then trace the cutout
line on the template (A1 or A2) with a pencil.
Drill a pilot hole and cut the countertop opening. Use the
appropriate cutting tool for the surface you are cutting.
WARNING: When you choose undermount style installation, do not pull out the installation rail shown
here. Pulling this rail out will permanently damage the sink. It is strongly recommended that you have a
professional installer install this sink for the undermount style.
10
NOTE: Under mount clips not included. If you are installing this sink as an
under mount, please contact a professional installer or contact us at
1-855-HD-GLACIER to determine the type of clip needed.
Undermount Installation