Glacier bay G15 User manual

THANK YOU
We appreciate the trust and confidence you have placed in Glacier Bay through the purchase of this toilet. We strive to continually
create quality products designed to enhance your home. Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing Glacier Bay!
USE AND CARE GUIDE
SMART TOILET
Questions, problems, missing parts? Before returning to the store,
call Glacier Bay Customer Service
8 a.m. – 7 p.m., EST, Monday-Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-GLACIER
HOMEDEPOT.COM/GLACIERBAY
Item # 000-000
Model # G15

Table of Contents
Table of Contents .........................................................
2
Safety Information ........................................................
2
Warranty ........................................................................
4
Pre-installation..............................................................5
Installation .....................................................................7
Tools required......................................................................... 5
Technical drawing .................................................................. 5
Hardware included .................................................................. 5
Package contents .................................................................. 6
Operation ..................................................................... 12
Parts identification ...............................................................12
Button functions ...................................................................13
Remote control operation ......................................... 16
Maintenance ............................................................... 20
Emergency troubleshooting ..................................... 20
LED display description ........................................................14
Lid auto open/close ..............................................................15
Foot sensor ..........................................................................15
Button functions ...................................................................16
Using the remote .................................................................17
Troubleshooting .........................................................22
Technical specifications ............................................23
Safety Information
DANGER: To reduce the risk of electrocution:
When using electrical products, especially when children are
present, basic safety precautions should always be followed,
including the following:
The appliance is not to be used by persons (including children)
with reduced physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have been given
supervision or instruction.
This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children
without supervision.
READ ALL INSTRUCTIONS BEFORE USING
Do not use while bathing.
Do not place or store product where it can fall or be pulled into
a tub or sink.
Do not place in or drop into water or other liquid.
Do not reach for a product that has fallen into water. Unplug
immediately.
Do not wash the main unit (A) or electrical plug with water or
detergent.
Do not handle the electrical plug with wet hands.
Close supervision is necessary when this product is used by,
on, or near children or individuals with disabilities.
Use this product only for its intended use as described in this
manual. Do not use attachments not recommended by the
manufacturer.
Never operate this product if it has a damaged cord or plug, if
it is not working properly, if it has been dropped or damaged,
or dropped into water. Return the product to a service center
for examination and repair.
Keep the cord away from heated surfaces.
Never use while sleeping or drowsy.
Never drop or insert any object into any opening or hose (J).
Do not use outdoors or operate where aerosol (spray) products
are being used or where oxygen is being administered.
Connect this product to a properly grounded outlet only. See
Grounding Instructions.
Do not throw cigarettes and other burning materials into
toilet, otherwise it might cause fire.
Never block the outlet of the air dryer.
Never disassemble, repair or modify this product.
During installation, disassembly, repair and maintenance of the
product, the power plug must be switched off and water supply
be shut off.
WARNING: To reduce the risk of burns, electrocution, fire,
or injury to persons:
2

3
Safety Information (continued)
This product is an electric appliance, so it must be placed far
away from water and other liquid.
Do not lay the product on its side or upside down during the
electrical circuit.
It is prohibited to use other electric appliances in the same
socket.
It is forbidden to use the power extension or unstable loose
outlet.
Do not reuse any existing water supply hoses, otherwise it
might cause leakage, fire or electrical shock. Installation
should include specified components and a new water supply
hose (J).
If repair or replacement of the cord or plug is necessary, do
not connect the grounding wire to either flat blade terminal.
The wire with insulation having an outer surface that is green
with or without yellow stripes is the grounding wire.
This product is factory equipped with a specific electric cord
and plug to permit connection to a proper electric circuit.
Make sure that the product is connected to an outlet having
the same configuration as the plug. No adapter should be
used with this product. Do not modify the plug provided —
if it will not fit the outlet, have the proper outlet installed by
a qualified electrician. If the product must be reconnected
for use on a different type of electric circuit, the reconnection
should be made by qualified service personnel.
Do not install or use the product in wet places such as steam
room etc.
It is recommended to use waterproof electrical outlet which
should be installed in a place where it is not easy to get wet.
This product should be used with 110V-120V, 50/60Hz
electrical current only, load current is at least 15A. Power plug
must be equipped with ground fault circuit interrupter or
ground fault electrical leakage protector or similar high
sensitive, rapid type leakage switch (Rated sensitive current
under 6mA).
When it thunders, it is strongly recommended to pull out the
power plug.
Do not stand on ceramic toilet.
Ceramic toilet must install floor fixing bolts.
Do not stand on product unit, seat and lid.
Do not lean against the seat lid when using the product, to
avoid damage.
This product is equipped with a soft-closing seat lid. Do not
push the toilet seat closed, or damage may occur.
Do not use any caustic chemicals or scrubbing brush to clean
this product.
Exposure to direct sunlight is prohibited.
Only use tap water or potable water, otherwise it may cause
chafing.
Do not connect water supply to heater outlet. Make sure inlet
water temperature is between 37.4–95°F (3–35°C).
When the room temperature is under zero degree, please
drain the water tank, to avoid freezing.
Raise room temperature to prevent the toilet from damage
due to freezing.
When moving the product from cold or wet environment into
normal room temperature, wait for 2 hours until the
condensation water is fully volatilized. Doing so can prevent
the product from electrical short circuit.
When not using the product over three (3) days, drain the water
out of the toilet and pull the electrical plug from the wall outlet.
Stop using the product and shut off the power when product
malfunctions. Call for professional service.
CAUTION: Indicates that failure to follow the instruction
may cause body injury or property damage.
GROUNDING INSTRUCTIONS
This product should be grounded. In the event of an electrical short
circuit, grounding reduces the risk of electric shock by providing an
escape wire for the electric current. This product is equipped with a
cord having a grounding wire with a grounding plug. The plug must
be plugged into an outlet that is properly installed and grounded.
DANGER: Improper use of the grounding plug can result in
a risk of electric shock.
3
HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.

4
Warranty
Thank you for choosing our product. This product is warranted for three (3) years from the purchasing date for free repair of problems
arising out of defects in workmanship while using in accordance with installation manual and usage cautions for intended purposes.
If the product does not work properly within warranty period, please contact your nearest service center. This certificate must be presented
to obtain free service under this warranty.
Our company reserves the right to replace the product by other similar models.
We can fix or repair the product at a reasonable service charge after expiration of warranty period.
Service charges shall be paid even during the warranty period, if breakage or damage is caused by any of the following events (including
but without limitation) :
Please fill in date and seller correctly. If there are some mistakes, the warranty will get invalid.
This three year warranty for free of charge of repair service is only for the items listed in the warranty.
The purchasing date is subject to the purchasing invoice or receipt.
Please keep this warranty and invoice/receipt available for repair or maintenance.
The user's negligence or mistake in operation, unreasonable repair or alteration.
Product is damaged by negligence or mistake during installation.
The movement of installation location of the product.
Using the product outside of intended use in residential housing or commercial hotel.
The use of non specified power supply (voltage, rating pressure).
The dirt, sand and impurities causing invalid operation.
Damages due to force majeure (including but not limited to natural disaster) or other incidents.
The user fails to use in compliance with the warning or caution described in the installation manual.
Remark

5
HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.
Pre-installation
HARDWARE INCLUDED
AA
EE
CCBB
DD
Part Description Quantity
AA Screw 1
BB Nut 2
CC Washer 2
DD Bolt 2
EE Screw 2
FF Angle valve (15/16-14UNS) 1
GG Angle valve (NPT 1/2) 1
FF GG
TECHNICAL DRAWING
18.7 in.
(476 mm)
15.4 in.
(390 mm)
16.2 in.
(412 mm)
39.1 in.
(993 mm)
27.5 in.
(700 mm)
15.5 in.
(393 mm)
The drawing is for reference only, and we reserve the right to
modify the product appearance.
Product appearance is subject to change in kind.
TOOLS REQUIRED
Tape measure
Drill (with 1/4 in.
drill bit)
Teflon tape
Assorted
wrenches
Assorted
screwdrivers Marker
Spirit level
Safety
goggles
Water bucket

6
Pre-installation (continued)
PACKAGE CONTENTS
Part Description Quantity
AMain unit 1
BInstallation manual 1
CRemote control 1
DRemote control hanger 1
EExpansion pipe 2
FPatch 2
GSealing flange 1
HInstallation cardboard 1
IMounting bracket 2
JBraided hose 1
KBattery box 1
LFixing sleeve 2
MDecorative cap 2
CA
E G HF
B
Model # G15
THANK YOU
Weappreciate the trust and confidenceyou haveplacedin GlacierB ay through the purchase of this [PRODUCT]. We strive to
continuallycreate quality productsdesigned toenhanceyourhome.Visitusonlinetoseeourfulllineofproductsavailable for your home
improvementneeds. Thank youfor choosing Glacier Bay!
USE AND CARE GUIDE
THD PRODUCT NAME: SMART TOILET
Questions, problems, missing parts? Before returningto the store ,
callGla cier Bay Customer Service
8 a.m. – 7 p.m., EST, Monday-Friday, 9 a.m.– 6 p.m ., EST, Saturday
1-855-HD-GLACIER
HOMEDEPOT.COM/GLACIERBAY
J K MLI
D

7
HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.
Installation
2Checking water volume
Minimum dynamic working water pressure:
0.18+ MPa (5.81+ gal/min or 22+ L/min), failure to meet
this pressure will not achieve the best flushing effect.
Open the angle valve (FF or GG) to check the water volume.
If the water volume after 10 seconds is greater than 0.97 gal
(3.7 L), then it is OK to proceed with installation.
NOTE: Apply the methods below if you don’t have water
pressure testing device.
NOTE: It is recommended to use high quality 6LR61 9V
battery.
NOTE: Connect battery box (K) to cable for flushing without
power and place it at the bottom of toilet if this function is not
required.
Angle valve
(FF or GG)
Hose (J)
Water bucket
3Installing mating angle valve
Draw drain outlet centerline on the floor.
Install angle valve (FF or GG) at proper position on wall
according to dimension of toilet.
Choose the correct size of mating angle valve (FF or GG)
that is compatible with your water oulet from the package.
CAUTION: Do not install or use the product in wet places
such as a steam room, etc.
Line
Drain outlet
Mating angle valve (FF or GG)
Installation Method 1:
15/16-14UNS (E) NPT 1/2 (F)
5/8 in. (F)
Installation Method 2:
1Installing battery box
Take battery box (K) and insert battery (not included) for
flushing without power.
Connect battery box (K) to the connection cable under the
toilet.
Place battery box (K) at the bottom of toilet.
battery
(not included)

8
Installation (continued)
4Installing the cardboard
Align cardboard (H) with the centerline of drain outlet.
Draw contour line according to cardboard (H).
12 in.
(305 mm)
Drain outlet
5Connecting the hose 6Installing the mounting bracket
Connect the water inlet and angle valve (FF or GG) of the
toilet with the matching hose (J) and tighten it.
Assemble the mounting bracket (I) with bolts (DD).
Install them to the pre-installed flange plate (not included)
on the ground.
Lock tight with washers (CC) and nuts (BB).
CAUTION: The floor fixing bolt should be installed to
ceramic toilet.
WARNING: The old aging water supply hose can not be
used, as it might cause leakage, fire or electrical shock.
Installation of the bidet seat should include specified
components and new water supply hose (J).
Angle valve connector
(FF or GG) Inlet connector
Flexible hose (J)
Nut (BB)
Bolt (DD)
Mounting bracket (I)
Washer (CC)

9
HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.
Installation (continued)
7Installing the toilet 8Installing the mounting bracket
Install a sealing flange (G) into drain outlet.
Install toilet on the corresponding position (refer to step 4).
Put the screw (EE) through the fixing sleeve (L).
Install it through the holes (on both sides of the toilet to the
mounting bracket (I) on the ground. Lock tight.
Install the decorative cap (M) on the fixing sleeve (L).
NOTE: Please make sure toilet outlet sits perfectly on drain
outlet.
Sealing flange (G)
Toilet drain outlet
Fixing sleeve (L)
Screw (EE)
Decorative cap (M)
NOTE: Two people are required to carry the toilet.
NOTE: Please clean up the drain outlet.

10
Installation (continued)
9a Installing the remote holder (Option 1)
9b Installing the remote holder (Option 2)
10 Battery installation
NOTE: When determining the installation position, it is
necessary to ensure that the remote control (C) can be reached
by hand when the person is sitting on the toilet.
Drill a 6 mm diameter hole in the wall to a depth of about
35 mm.
Tear off the double-sided adhesive sticker on the back of
the hanger (D).
Install the expansion pipe (E) into the wall hole, and align
it with the hanger (D) hole. Attach the double-sided
adhesive sticker on the back of the hanger (D) to the wall,
lock the screw (AA), and tear off the double-sided adhesive
sticker on the back of the patch (F) and stick it on.
Clean and wipe dry the pre- installed area of the remote
control hanger (D) on the wall.
Tear off the double-sided adhesive sticker on the back of
the hanger (D).
Stick to the wall vertically, tear off the double-sided
adhesive sticker on the back of the patch (F) and stick it
on.
Install the new batteries (not included) into the remote
control (C) and cover the battery cover.
Put the remote control (C) in the hanger (D).
Battery cover
Double-side tape patch (F)
Double-side tape patch (F)Installation area
CAUTION: It is forbidden to install and use the product in the
bathroom and other wet places. And do not put it in the place
where it is easy to be drenched by water.

11
HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.
Installation (continued)
11 Turning on the angle valve
Check the threaded connection for leaks to ensure
complete sealing.
Turn the angle valve (FF or GG) counterclockwise to
the full open position.
12 Connecting the power
Plug the toilet's leakage protection plug into a power
socket.
Press the reset switch, plug indicator lights up,
indicating that the power is on.
Press the test button prior to usage, the reset switch
pops up indicating that the leakage protection function
is normal.
NOTE: The angle valve (FF or GG) opens with a large torque
for the first time.
Angle valve
(FF or GG)
13 Running self-inspection
Once power is connected, the buzzer beeps and the
button lights up in white. All icons on the display light up,
and the self-inspection starts.
The buzzer beeps again, then the self-inspection
completes. The button lights up in white. Sterilization,
water temperature and ECO icons go off and seat
temperature icon lights up.
The product is ready to use.
Current detection
test button
Reset switch
Indicator light
RESET
REMETTRE
TEST
TEST BEFORE EACH USE
1. PLUG INTO RECEPTACLE
2. PRESS RESET BUTTON:
VISUAL INDICATOR APPEARS.
3. PRESS TEST BUTTON:
VISUAL INDICATOR DISAPPEARS.
4. PRESS RESET FOR USE.
DO NOT USE IF ABOVE TEST FAILS.
WARNING:
NOTE: Only for models with leakage protection plug.
NOTE: Press the TEST button (then RESET button) every
month to assure proper operation.
NOTE: Please refer to the actual product.

12
Operation
1Parts identification
LED display
Dryer shield
Nozzle shield
Bumper
Seat
Ceramic toilet
Electric leakage
protection plug
Lid
Remote control
sensor
Rear washing
Spray nozzle
Button
Front
washing
Touch the sensing
area with foot
RESET
REMETTRE
TEST
TEST BEFORE EACH USE
1.PLUG INTO RECEPTACLE
2.PRESS RESET BUTTON:
VISUAL INDICATOR APPEARS.
3.PRESS TEST BUTTON:
VISUAL INDICATOR DISAPPEARS.
4.PRESS RESET FOR USE.
DONOT USE IF ABOVE TEST FAILS.
WARNING:
NOTE: Please refer to the actual product.
Left side
Right side

13
HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.
Operation (continued)
2Button functions
NOTE: Default settings for all functions are intermediate when powering on. Use remote control (C) to switch to the function level set before.
Rear washing/
Moving washing
Stop
Front washing/
Moving washing
Flushing
Press and hold Stop button to enter shutdown mode (white light off). Press Stop button again to return to
functional mode (white light on, not flashing). In shutdown mode, all functions and buttons (with the exception
of the Stop button) will not operate.
When seated, short press Stop button to stop front washing, rear washing or drying functions. When no one is
seated, repeatedly press Stop button to switch between functional mode (white light always on) and energy
saving mode (white light flashing).
When seated, press Rear Washing button to start rear washing function and press again to shift to moving
washing. Press Stop button to stop rear washing immediately. After one washing cycle, the drying function will
be automatically turned on and stop after one cycle.
When no one is seated, press Rear Washing button, the nozzle will stretch out to allow access for cleaning.
Press Stop button, the nozzle will retract.
When seated, long press Flushing button to start drying function. The drying will stop automatically after one
cycle. Press the Stop button to immediately stop the drying function.
Short press Flushing button to start flushing function. During rear washing or front washing, flushing function
will not operate. During nozzle cleaning, only when spray wand is fully extended or retracted can flushing
function be activated.
When seated, press Front Washing button to start front washing function and press again to shift to moving
washing. Press Stop button to stop front washing immediately. After one washing cycle, the drying function will
be automatically turned on and stop after one cycle.

14
Operation (continued)
3LED display description
During self-inspection, the icons for sterilization, water temperature, seat temperature and ECO light up, and the temperature is
displayed at 88°F. After self-inspection, sterilization, water temperature and ECO icons go off and seat temperature icon lights up,
showing current seat temperature. The temperature shows “--” at neutral level.
When not in energy saving mode, seat temperature icon lights up, showing current seat temperature (temperature in neutral shows
"--"). During water temperature adjustment, seat temperature icon goes off and water temperature icon lights up, showing current
water temperature (temperature in neutral shows "--"). Water temperature icon goes off and seat temperature is displayed after
10 seconds.
During washing, seat temperature icon goes off and water temperature lights up, showing current water temperature
(temperature in neutral shows "--").
Sterilization icon lights up when this function is turned on, otherwise it is off.
In energy saving mode, ECO icon lights up. Seat temperature in neutral shows "--", otherwise it shows Level 1.
LED display goes off completely when shutting down.
LED display goes off completely after 30 seconds once no longer being used. When seated or pressing any button, LED display is
activated to show current status.
When user enters the sensing range, LED display lights up showing current status. Display goes off completely 30 seconds after
user leaves.
ECO energy savingseat temperaturetemperature displaywater temperaturesterilization

15
HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.
Operation (continued)
4Lid auto open/close 5Foot sensor
Approaching the toilet When the lid and seat are both closed, touch the sensing
area with foot to open the lid.
When the lid is open and seat closed, touch the sensing
area with foot to open the seat.
Seat
Lid
Lid
Seat
Lid
When the seat and lid are open, touch the sensing area
with foot to close the seat and lid and activate a flush.
When user enters the sensing range, the seat lid opens
automatically.
Leaving the toilet
The seat lid closes automatically 3 minutes after user
leaves.
Standing up to urinate
Open the seat by remote control (C) or hand.
The seat and lid close automatically 3 minutes after user
leaves.

16
Remote control operation
1Button functions
Deodorizer
Night light
Open/Close the seatOpen/Close the lid
Nozzle moving
forward
Nozzle moving
backward
Drying/
Dryer temperature
Water reducing
Rear washing/
Moving washing
Front washing/
Moving washing
Water temperature
Flush
Water increasing
Indicator light
Seat temperature
Stop/Energy saver
Mute
NOTE: Please stay backward when sitting on the seat so that the cleansing position can be easily aligned and there will be no splash.
NOTE: The unit makes a clicking noise when front washing, rear washing, and drying functions are in operation.
NOTE: The nozzle will continue to spray for 1-2 seconds after the "STOP" button is pressed.

17
HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.
Remote control operation (continued)
2Using the remote
Rear washing
Front washing
Dry
喷嘴
喷嘴
Nozzle
DRY | DRYER TEMP
WATER VOLUME ADJUSTMENT
Press " + " or " - " button during rear washing or front
washing, the indicator light will show the current water
volume level. Adjust water volume by 3 levels.
FLUSH
SPRAY NOZZLE POSITION ADJUSTMENT
Press " ∧ " or " ∨ " button when it is under function of
rear cleaing or front washing, the indicator light will show the
current nozzle position. Adjust nozzle position by 5 levels.
REAR | MOVE
FRONT | MOVE
Press " " button, the indicator light shows current water
temperature level, and rear washing starts. Press again " "
button to shift to moving washing (nozzle moves forward and
backward to expand washing area). The washing will last for
a cycle and stop automatically. Press the " " button to
immediately stop washing.
Press " " button, the indicator light shows current water
temperature level, and front washing starts. Press again " "
button to shift to moving washing (nozzle moves forward and
backward to expand washing area). The washing will last for
a cycle and stop automatically. Press the " " button to
immediately stop washing.
Press the " " button, the indicator light will light up,
showing the current air temperature range. It will stop drying
automatically after a cycle or after the user leaves the seat.
In the process of drying, press the " " button to adjust
the air temperature, and the indicator light will light up to
display the air temperature range. When the indicator light
is not on, it is 0 grade (normal temperature range), and the
range adjustment mode is 0-5 grade in turn.
Short press " " button, the toilet starts flushing.
Long press " " button to turn on/off auto flush function.
When the auto flush function is turned on, toilet will
automatically flush after detecting user leaving the seat.

18
Remote control operation (continued)
ECO
WATER TEMP.
Long press " " button to enter energy saving mode. Long press " " button again to exit energy
saving mode.
Energy saving
Under energy saving mode, seat temperature is low (level 1) to achieve energy saving.
Energy saving mode will be suspended and go to function mode if someone uses the seat in the
middle of energy saving. The seat starts to heat immediately when the seat temperature is not turned
off, and the energy saving mode is restored after the user leaves the seat.
Short press the " " button to adjust the water temperature. The indicator will show the water
temperature level if it’s on. When the indicator is off, the water level is 0. Short press this button to
adjust water temperature level from 0 to 5 in cycle.
SEAT TEMP.
Short press the " " button to adjust the seat temperature. The indicator will show the seat
temperature level if it’s on. When the indicator is off, the seat level is 0. Short press this button to
adjust seat temperature level from 0 to 5 in cycle.
LIGHT
Night light adjustment: Short press " " button to turn on/turn off night light.
Smart mode: Long press " " button to enter into smart mode (night light will be on or off by
detecting the lightness of surroundings). If the product is in smart mode, short press " " button
to exit smart mode. (Night light factory default setting is smart mode.)
MUTE
Short press " " button to turn on/off quiet mode.
SEAT TEMP.
WATER TEMP.
Normal
temperature
Grade 1 Grade 2 Grade 3 Grade 4 Grade 5
Normal
temperature
Grade 1 Grade 2 Grade 3 Grade 4 Grade 5
DEODORIZER
Short press " " button to turn on/off auto deodorization function. While the auto deodorization
function is on, deodorizing starts when it detects a user is seated and stops when user leaves. When
warm air is on, deodorization function is off. (This function is set to on by default.) DEODORIZER
NOTE: If the seat temperature before energy saving is neutral,
keep the neutral after energy saving.

19
HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.
Remote control operation (continued)
OPEN | CLOSE THE LID | SEAT
OPEN CLOSE THE LID OPEN CLOSE THE SEAT
/
Short press " " button to open or close the lid.
Short press " " button to open or close the seat.
Long press " " button to turn on/off auto lid open/close function.
The buzzer will sound “ BEEP ” when the user presses one button which means
the main unit (A) receives the signal and conduct the operation accordingly. If the
buzzer doesn't sound, it means the main unit (A) doesn't receive the signal. Please
adjust the remote control (C) direction and repress the button.
In case of power outage during nozzle spray operation, the nozzle cannot go back
to place. Please wait until power is restored. In case of a power outage for a long
period, please push the nozzle softly back by hand. Do not push hard, to avoid
damage to nozzle and electrical machine.
USER CODE
Plug in the toilet. It will execute self-inspection. When finished, it beeps once.
First press " " button, then press " " button, the indicator light will flash.
Press the Pressure " + " or " - " button to select user 1-9 (as shown below).
The indicator light displays the corresponding user code and flashes.
Press " " button, then press " " button. The main unit (A) beeps once to
signal the remote control (C) and the toilet are matched successfully.
User 1 User 2 User 3 User 4 User 5
User 7 User 8 User 9User 6
AUTOMATIC PRE-WETTING
Press and hold the " " button and press the " " button to turn on or off
the automatic pre-wetting function. After the automatic pre-wetting function is
turned on, the pre-wetting function is performed when the user is detected to
be seated.
FOOT SENSE SWITCH
Press and hold the " " button and press the " " button to turn the foot
sense function on or off. In the seated status, foot sense function is invalid.
TIPS
STERILIZATION
When user is not seated and washing/drying is off, long press “ ” button to
turn on plasma sterilization function. This function will stop automatically after 2
hours. During this mode, if any other button is pressed or user is seated, it will stop
automatically.
+
+
+

20
Maintenance
Main unit (A) care and maintenance
Shut off power supply before doing maintenance.
Use only a soft, damp cloth to clean. Avoid using harsh
chemicals.
Once cleaning is completed and all surfaces are dry, re-
connect the power plug.
Filter maintenance
Turn off power and the angle valve (FF or GG).
Unscrew angle valve nut.
Remove filter net.
Clean out the filter net under running water using a
toothbrush.
Reinstall filter net and angle valve nut.
Turn on the angle valve (FF or GG) and connect the power.
Spray nozzle maintenance and care
Nozzle self-cleaning
When no one is seated, short press “REAR/MOVE”
Button on the main unit (A). The nozzle will automatically
extend to allow access for cleaning.
When the nozzle moves forward, the nozzle can be
removed and cleaned separately.
Do not pull or push the wand, to avoid damage.
Put the nozzle back on and press "Stop" Button to
return the spray wand to its normal position.
Spray nozzle disassembly
Use only a soft cloth or soft brush to clean.
Nozzle retraction
Emergency troubleshooting
No water supply
Put around 2.1 gal (8 L) water into a barrel and flush the
toilet bowl.
No power
Short press "Flush" Button on the main unit (A) to flush.
NOTE: Avoid water spilling from bowl.
NOTE: Please install battery before use.
short press
“Flush” button