Glastender ST24 User manual

Glastender, Inc. · 5400 North Michigan Road · Saginaw, MI · 48604-9780
800.748.0423 · 989.752.4275 · Fax [phone] · www.glastender.com
© 2017 Glastender, Inc.
Slide Top CoolerS*
ModelS: ST24, ST36, ST48, ST60, ST72, and ST96
A Family Company Manufacturing
In The USA Since 1969
Operation Manual, Parts Directory, and Price List
*This manual is specic to Slide Top Coolers
manufactured on March 27, 2017 and after
Rev. 01-09-18

1
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
800.748.0423 • 989.752.4275 • Fax [phone] • www.glastender.com
OM005
TopiC page
Terms and Conditions .................................................................... 2
Warranty Statement........................................................................ 3
Digital Controller Operation.......................................................... 4
Installation...................................................................................... 5
Operation........................................................................................ 5
Cleaning Instructions ..................................................................... 6
Wiring Diagram ............................................................................. 7
Evaporator and Related Parts ........................................................ 8
Compressor and Condenser Related Partes............................9 - 10
Doors, Tops, and Related Parts.................................................... 11
Shelving and Related Parts .......................................................... 11
Refrigeration Compartment Covers............................................. 12
220V Electrical Parts ................................................................... 12
index

2
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
800.748.0423 • 989.752.4275 • Fax [phone] • www.glastender.com OM005
TerMS and CondiTionS
priCeS:
All prices are LIST. Applicable taxes will be added.
QuoTaTionS:
Unless otherwise stated, quotations are effective for 30 days only.
aCCepTanCe:
All orders are subject to acceptance by Glastender, Inc.’s headquarters in
Saginaw, Michigan. Possession of the Product Directory and Price List
is not an offer to sell.
ShipMenTS:
F.O.B. factory in Saginaw, Michigan. Freight terms are Third Party or
Collect if shipped directly to you. Prepay and Add to Invoice freight
terms are available upon request. The approximate shipping weights of
all products are listed with the prices. Partial shipments will be made
unless otherwise specified by the customer. Surface freight classifica-
tions are:
• GT-24/GT-30/GW24 Glasswashers - Class 175
• GT-18 Glasswashers - Class 250
• All Underbar Equipment - Class 175
• Bar Die Orders – Class 250
• Portable Bars - Class 175
• Remote refrigerators (i.e., no compressor) or dry storage back bar
equipment - Class 175
• Self-contained refrigeration equipment - Class 150
• Ice Display Units (IDU and GDU) - Class 85
• Lighted Liquor Displays - Class 85
• Beer line chillers and beer towers (beverage dispensing equipment)
- Class 92.5
• Bottle Disintegration System - Class 150
• Ice Cream Freezers - Class 77.5
All small items are evaluated to see the most cost effective means for
shipment. Many small items ship via UPS or FedEx; however, when
dimensional weight is excessive, LTL carriers are the most cost effective
choice. Spare parts orders received before 1:00 PM EST can usually be
shipped the same day.
The order department is happy to assist with routing or shipping questions.
payMenT TerMS:
Cash should be included with all orders unless credit terms have been
arranged. To establish credit, banking and trade references are required.
A convenient credit application is available upon request. Payment via
credit card is not our normal means of receiving payment. Visa and
MasterCard will be accepted, but must be charged at the time of ship-
ment. In addition, a payment via credit card for orders totaling more than
$500 will incur a 3% convenience fee on the total transaction amount.
delivery:
The majority of equipment is manufactured to order and typically ships
within three to six weeks after complete order information is received by
the factory. In-stock equipment typically ships within two to three days
of the factory receiving complete order information.
reTurnS:
Items specified as “Manufactured to Order” are NOT returnable.
A Return Authorization number must be issued by the factory in
advance for any items that are returnable. The number MUST be noted
on the outside of the returned package. Returns must be received within
90 days of the issue date. Shipping charges must be prepaid. A mini-
mum 20% restocking charge will be applied to all authorized returns if
received in new, unused condition in the original packaging.
The above conditions apply to spare part returns, except spare part
returns must be received within 30 days of original shipment for elec-
tronic or electrical parts or within 90 days for all other parts.
loSS or daMage:
For customer routed shipments, Glastender, Inc. is not responsible for
any loss, damage, or delay of merchandise during shipment. Such transit
claims must be filed with the carrier. Merchandise must be examined on
arrival. If shortages occur, Glastender, Inc. must be notified in writing
within five (5) days of delivery to honor any shortage claim. Glastender
will assume responsibility for freight claims on Prepay and Add ship-
ments but the customer must inspect freight and note any damage upon
receipt. Failure to do so may result in losses at the customer’s expense.
CuSToM orderS:
Custom orders must be paid in advance and are not subject to cancellation.
laMinaTeS:
Some products include common, readily available plastic laminates of
the customer’s selection. There may be an additional charge if uncom-
mon varieties are ordered.
12/14/17

3
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
800.748.0423 • 989.752.4275 • Fax [phone] • www.glastender.com
OM005
WarranTy STaTeMenT
Glastender, Inc. warrants all products to be free of defects in mate-
rial and workmanship. One-year labor and parts warranty applies to
all glasswashers, self-contained refrigeration models, and BDS model
bottle disintegration units. In established areas, a start up is included
with GT-24 and GT-30 model glasswashers. Warranty is effective for
one year from the date of installation or up to 18 months from date of
factory shipment, whichever occurs sooner. Glastender, Inc. will replace
any part or assembly found defective under normal use and service.
For warranty labor claims beyond 15 months from the date of factory
shipment, proof of date of installation or occupancy must be provided.
Authorization for labor must be obtained from Glastender within the
warranty period and prior to the service being performed.
Labor warranty applies to the United States and Canada only.
Remote refrigeration models and beer line chillers include a one-year
parts warranty only. There is no labor warranty on these products.
Field replacement parts not covered under the original warranty include
a 90-day part warranty from the date of installation.
FOUR YEAR ADDITIONAL COMPRESSOR WARRANTY:
Glastender will warrant to the original user the compressor for all self-
contained refrigeration models for an additional four years following the
regular one-year warranty period. This plan applies to the compressor
only.
A completed warranty claim form MUST accompany all returned defec-
tive parts or assemblies. Upon request, a defective part or assembly must
be returned to Glastender, Inc., Saginaw, Michigan, with all transporta-
tion and delivery charges prepaid. Warranty repairs or replacements
will be shipped FOB factory in Saginaw, Michigan. Reimbursement for
applicable freight charges covers ground service only.
Glastender provides in-warranty repairs during a service company’s
regular working days and hours. There is no provision for payment
of a premium rate during “overtime” hours. When warranty service is
requested during other than normal working hours, the end user will be
charged the premium portion of the overtime rate.
The warranty covers substantiated travel expenses for up to 2 hours /
100 miles round trip up to a maximum of $150. Any additional costs
due to installations that require extra work, time, or travel to gain access
for service are the sole responsibility of the equipment purchaser. Any
exceptions to these travel and access limitations must be pre-approved
by a factory representative.
The warranty does not cover door gaskets, chemical tubing, pump
squeeze tubing, and/or any equipment subjected to accidents, freight
damage, alterations from the original design, improper power and/or
plumbing hookups, improper chemical use, general misuse, or lack
of routine required maintenance as determined by Glastender, Inc.
Installation, normal control adjustments, general maintenance, correct-
ing an installation error, or service calls that reveal the unit is function-
ing normally will not be reimbursed under warranty.
Condenser coils on self-contained refrigeration products must be
cleaned regularly. Failure to provide adequate air flow to a refrigeration
unit will void the warranty.
Glastender shall not be liable for loss of use, revenue, or profit, or for
any other indirect, incidental, special, or consequential damage includ-
ing, but not limited to, product spoilage or loss.
This warranty is conditioned upon Glastender receiving notice of any
defect subject to this warranty within sixty (60) days of its discovery
by the end user or dealer. All products are warranted only for the initial
place of installation. Removal of a product automatically terminates
this warranty.
SECOND YEAR EXTENDED PARTS & LABOR WARRANTY:
Glastender’s one-year parts and labor warranty on self-contained refrig-
eration units, excluding beer line chillers, can be extended to two years
with the purchase of a two year parts and labor warranty. Specify part
number EWR2 ($150 net price) when ordering.
EXPORT WARRANTY - One year parts only.
EXCLUSION OF WARRANTIES
EXCEPT AS PROVIDED ABOVE, GLASTENDER MAKES
NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
OR NON-INFRINGEMENT.
LIMITATION OF REMEDIES AND DAMAGES
If Buyer makes a valid and timely claim as outlined above, Glastender’s
liability and Buyer’s remedies under this agreement will be limited solely
to labor charges authorized and/or replacement or credit, at Glastender’s
option, with respect to Products returned at Buyer’s expense within thir-
ty (30) days after warranty repair. GLASTENDER’S LIABILITY WILL
IN NO EVENT BE GREATER IN AMOUNT THAN THE PURCHASE
PRICE OF THE RETURNED PRODUCTS. GLASTENDER
WILL NOT BE LIABLE UNDER ANY CIRCUMSTANCE FOR
CONSEQUENTIAL OR INCIDENTAL DAMAGES, INCLUDING,
BUT NOT LIMITED TO, LABOR COSTS EXCEPT AS COVERED
UNDER OUR WARRANTY, LOST PROFITS OR THE LOSS OF
PERISHABLE PRODUCTS RESULTING FROM THE USE OF OR
INABILITY TO USE OUR PRODUCTS OR FROM OUR PRODUCTS’
INCORPORATION INTO OR BECOMING A COMPONENT OF
ANY OTHER PRODUCT. NEITHER PARTY WILL HAVE ANY
NEGLIGENCE OR OTHER TORT LIABILITY TO THE OTHER, OR
TO ANY THIRD PARTY, ARISING FROM ANY BREACH OF THIS
AGREEMENT.
GOVERNING LAW - JURISDICTION
The terms and conditions of an order are to be governed and construed
according to the laws of the State of Michigan, without regard to conflict
of laws principles. Buyer hereby consents to the jurisdiction and venue
of the courts located in Saginaw County, Michigan.
No representative, distributor, dealer, or any other person is authorized
to modify this warranty. This warranty replaces all other written or
verbal warranties.
NOTE: Glastender, Inc.’s policy of constant quality improvement
means that prices, specifications, and policies are subject to change
without notice. Questions regarding this warranty should be directed to
Glastender’s Warranty Administrator.
04-19-17
APPLICABLE TO ALL PRODUCTS SOLD WITHIN THE UNITED STATES AND CANADA
IMPORTANT!!
Attention Service Companies
Please review the important warranty information on this page. If you
believe a service call should be covered by the factory, please call
the factory for authorization between 8AM and 5PM EST, Monday
through Friday.

4
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
800.748.0423 • 989.752.4275 • Fax [phone] • www.glastender.com OM005
digiTal ConTroller operaTion
Factory Settings Range of Adjustment
Set Point Operating Range†Minimum Set Point Maximum Set Point
Standard Cooler Setting 34º F 34º F to 39º F 33º F 65º F
W = White Wine 50º F 50º F to 55º F 33º F 65º F
R = Red Wine 60º F 60º F to 65º F 33º F 65º F
The refrigerator is programmed to automatically defrost four times
daily for approximately twenty minutes. During defrost, the fan
inside the cooler will remain on and the refrigeration system will turn
off. The defrost process can be activated/deactivated manually in the
quick access menu through the dEFr or pressing the Increase key for 4
seconds. Activation or deactivation will be indicated by the messages
dEFr On or dEFr OFF respectively.
The thermostat controller has an “OFF” function. The shutdown of he
control functions allows the controller to operate only as a temperature
indicator, keeping the control outputs and alarms off. The use of this
feature is enabled or disabled by the shutdown function of the control
functions. When enabled, the control functions and alarms are switched
off CtrL OFF or on Ctrl On in the quick access menu through the
CtrL option. When the control functions are off, the message OFF is
displayed alternating with the temperature and other messages. Also
is possible turn on/turn off the control functions by pressing the Quick
Access menu key for 5 seconds.
The thermostat control probe wire may become disconnected when
the compressor compartment cover and/or grill are removed. This will
result in thermostat Err 1 or Err 3 code. Service calls to reconnect the
probe wiring are not covered by factory warranty.
SignalS
Ambient sensor disconnected or out of range.
Sensor 3 disconnected or out of range.
Operation with economic setpoint.
High ambient temberature alarm (sensor1).
Low ambient temperature alarm (sensor1).
High temperature in condenser alarm (level 1). If
this signal occurs, condenser may need cleaning.
High temperature in condenser alarm (level 2). If
this signal occurs, condenser may need cleaning.
Compressor reached the maximum time on
without reaching the SP.
Control routines off.
It indicates that the temperature for end of
defrost has not been reached.
Please contact Full Gauge Controls.
Recongure the values of the functions.
The operating temperature range is preset at the factory
according to the table below and can be adjusted up or down
within the limits shown.
Setting the desired temperature-
To access the setpoints setup menu, press Set for 2 seconds. The
message SP will appear on the display followed by the normal
setpoint set value. Use the Increase key or Decrease key to
modify the value and conrm by pressing Set. Immediately, the
message SP-E appears indicating the setting of the economic
setpoint. Again, use the Increase key or Decrease key to modify
the value and conrm by pressing Set. Finally, the - - - -
indication signals the set up completion. The setpoints can also
be adjusted individually in the quick access menu.

5
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
800.748.0423 • 989.752.4275 • Fax [phone] • www.glastender.com
OM005
inTroduCTion
This manual describes the operational features of Slide Top Coolers. Please review this information
before attempting installation and operation.
Long term, trouble-free service will follow if good housekeeping and maintenance procedures are fol-
lowed. Thank you for selecting Glastender, Inc. products.
uTiliTy reQuireMenTS and ConneCTionS
• Electrical: 120 Volt AC, 1 Phase, 60 Hz. A separate 15 Amp circuit is recommended. A 6-foot
grounded cord is included.
• Plumbing: None required. Automatic condensate evaporator is included.
unCraTing and STarT-upinSTruCTionS
All Slide Top Cooler models are shipped in one carton. These steps should be followed:
1. If legs or casters are included, bolt them to the base with the bolts provided.
2. Unwrap power cord from base.
3. Position unit and level and/or seal as required (see page 1-2).
4. Place racks in desired location.
5. Plug into 120 volt AC outlet.
6. Load with bottles or cans and allow time to cool. For best performance, load with pre-cooled
bottles or cans. It is recommended that back-up product be stored in a walk-in cooler.
7. Your Glastender equipment is now ready for use.
Sealing Slide Top BaSe To Floor
To comply with NSF & health codes. The slide top base must be sealed to the floor using NSF listed
sealant. Place bead of sealant along outer edges of the base and remove excess with disposable towel.
operaTion
The Slide Top Cooler is designed to maintain bottles and cans at an operating temperature range of
34°F (2°C) to 40°F (5°C).
Slide Top Coolers include an automatic defrost system. The cooler will defrost every six hours for
approximately 20 minutes. During the defrost, the fan inside the cooler will remain on and the refrigera-
tion system will turn off.
inSTallaTion

6
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
800.748.0423 • 989.752.4275 • Fax [phone] • www.glastender.com OM005
Cleaning inSTruCTionS
Cleaning is essential to sustaining the integrity of your equipment and preventing corrosion.
ESTIMATED CLEANING TIME: 5 to 10 minutes per unit daily, 45 minutes quarterly
FREQUENCY: Daily cleaning of exterior & door gaskets. Quarterly cleaning of interior, including shelves.
PROCEDURE:
1. A non-chlorine based cleaner or mild detergent and warm water applied with a soft cloth or sponge to all con-
tact surfaces.
2. Immediately rinse off cleaning agent(s), using clean warm water, clean soft cloth or sponge.
3. Dry with a soft clean cloth, removing standing water as soon as possible.
NOTES:
1. Never use hydrochloric acid, wire brushes, steel wool, scrapers, or chlorine based cleaners on stainless steel
surfaces, since they will break down the passivity layer and allow corrosion to occur.
2. On stainless steel surfaces, you may use a soft bristle brush or Scotch-Brite®pad for more stubborn stains.
Always scrub with the direction of the grain. Follow with a thorough cleaning as described above.
3. Deposits from food preparation must be properly removed. Even hard water deposits will rust stainless steel,
if not removed.
4. Repeated cleaning may dry up black-vinyl-clad steel (exterior) surfaces of the cooler. Armor All®or similar
product can bring back the shine. Apply the product to a cloth and then rub into the surface, rather than spray-
ing it directly onto the black-vinyl-clad surface.
5. The cooler door gaskets are most often overlooked when cleaning. Failure to clean them regularly will lead to
premature failure, since alcohol and moisture build-up breaks down the gasket material.
6. A slide top cooler does not have an interior drain, so a large sponge is required for removing excess moisture
from the interior after cleaning.
Cleaning inSTruCTionS

7
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
800.748.0423 • 989.752.4275 • Fax [phone] • www.glastender.com
OM005
Wiring diagraM
FAN
CONDENSER
FAN
COMPRESSOR
ST WIRE DIAGRAM - 08000513
L1
N
DIGITAL CONTROL
ORANGE

8
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
800.748.0423 • 989.752.4275 • Fax [phone] • www.glastender.com OM005
12
11
evaporaTor and relaTed parTS
parT no. deSCripTion priCe
1. 06006995 Bracket, evaporator fan motor (ST24) $14.00
2. 07000387 Bracket, evaporator fan motor (ST36, ST48, ST60, ST72, ST96) 14.00
3. 06010041 Guard, evaporator fan (ST24) 25.00
4. 06010027 Fan blade, evaporator (ST24, ST36, ST48, ST60) 10.00
5. 06010029 Fan blade, evaporator (ST72, ST96) 10.00
6. 06010030 Fan motor, evaporator 190.00
7. 06009143 Evaporator coil (ST24) 125.00
8. 11000080 Evaporator coil (ST36, ST48, ST60, ST72, ST96) 225.00
9. 07000498 Cover, front, evaporator (ST24) 60.00
10. 07000390 Cover, front, evaporator (ST36, ST48, ST60, ST72, ST96) 20.00
11. 07000499 Drain pan, evaporator (ST24) 50.00
12. 07000384 Drain pan, evaporator (ST36, ST48, ST60, ST72, ST96) 60.00
06001345 Tubing, drain, clear plastic, 1/2″ ID x 5/8″ OD per ft. 1.45
08000339 Tubing, capillary, .036" X 186", ST24 30.00
06006096 Expansion valve (ST72, ST96) 135.00
06010046 Expansion valve (ST24, ST36, ST48, ST60) 110.00
9
10
8
4
12
6
5
3
7

9
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
800.748.0423 • 989.752.4275 • Fax [phone] • www.glastender.com
OM005
CoMpreSSor and CondenSer relaTed parTS
parT no. deSCripTion priCe
1. 06010201 Electrical component kit, FFU80HAX (ST72, ST96) $65.00
2. 06009280 Start capacitor, EM45HHR (ST24, ST36, ST48, ST60) 21.00
3. 06009287 Overload protector, EM45HHR (ST24, ST36, ST48, ST60) 15.00
4. 06009279 Relay, EM45HHR (ST24, ST36, ST48, ST60) 21.00
5. 06010021 Compressor, R134a, 115V, 60 Hz, FFU80HAX (ST72, ST96) 385.00
6. 06008990 Compressor, 115V/60Hz, R134a, EM45HHR (ST24, ST36, ST48, ST60) 390.00
06010027 Fan blade, condenser (ST24, ST36, ST48, ST60) 10.00
07000155 Fan blade, condenser (ST72, ST96) 12.00
7. 06001449 Motor, condenser fan 100.00
8. 06006990 Bracket, condenser fan motor mounting (ST48, ST60, ST72, ST96) 14.00
9. 06006987 Fan shroud, condenser (ST24, ST36, ST48, ST60) 14.00
06006988 Fan shroud, condenser (ST72, ST96) 14.00
10. 11000080 Condenser coil 225.00
11. 06010023 Filter dryer 40.00
12. 06005359 Drain pan assembly 42.00
13. 06005358 Wicking material (7) 11.25″ x 1″ wide 21.00
06009527 Power cord, exterior, 132″ long 35.00
14. 06011056 Digital control, standard temp, w/probes 120.00
06010205 Digital control replacement probe 10.00
1
3
2
6
5
4

10
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
800.748.0423 • 989.752.4275 • Fax [phone] • www.glastender.com OM005
CoMpreSSor and CondenSer relaTed parTS
10
13
12
7
11
9
14
8

11
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
800.748.0423 • 989.752.4275 • Fax [phone] • www.glastender.com
OM005
3
1
doorS, TopS, and relaTed parTS
2
Shelving and relaTed parTS
parT no. deSCripTion priCe
1. 08000489 Bracket, rack, chrome divider, 3 required (ST36) $20.00
08000490 Bracket, rack, chrome divider, 3 required (ST48) 20.00
08000491 Bracket, rack, chrome divider, 3 required (ST60) 20.00
08000492 Bracket, rack, chrome divider, 3 required (ST72) 20.00
08000493 Bracket, rack, chrome divider, 3 required (ST96) 20.00
00000031 Screw, bracket mounting, #10 x 1/2″ PPH, SS, SMS 1.00
2. 08000512 Rack divider, chrome (ST36, ST48, ST60, ST72, ST96) 50.00
3. 08000519 Divider wall, stainless steel (ST24, (2 each) ST36, (3 each) ST48 and ST60,
(4 each) ST72, (5 each) ST96 )
60.00
parT no. deSCripTion priCe
07000129 Gasket, wiper, 24" top 21-1/2" long $10.00
07000130 Gasket, wiper, 36" top 33-1/2" long 14.00
08000108 Sliding door, with lock, 32-3/16", ST36 240.00
08000295 Sliding door, with lock, ST24, ST48, ST72, ST96 180.00
08000225 Key, CH751 for slide top cooler lock 4.00
07000231 Top, ST24 126.00
07000232 Top, ST36 192.00
07000233 Top, ST48 252.00
08000184 Top, ST60 360.00
08000120 Top, ST72 384.00
08000121 Top, ST96 510.00
07000250 Breaker strip, 24" sliding locking door opening, 4 pieces 70.00
07000251 Breaker strip, 36" sliding locking door opening, 4 pieces 80.00
07000238 Breaker strip, 24" sliding door opening, 4 pieces 25.00
07000239 Breaker strip, 36" sliding door opening, 4 pieces 35.00

12
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
800.748.0423 • 989.752.4275 • Fax [phone] • www.glastender.com OM005
220 volT eleCTriCal parTS
3
12
parT no. deSCripTion priCe
06010022 Compressor, R134a, 220V 50 Hz. (ST72, ST96) $385.00
06009282 Start capacitor, 220V (ST24, ST36, ST48, ST60) 21.00
06009281 Relay, 220V (ST24, ST36, ST48, ST60) 15.00
06009288 Overload protector (ST24, ST36, ST48, ST60) 15.00
06009150 Compressor, 220V (ST24, ST36, ST48, ST60) 390.00
06001451 Motor, condenser fan 125.00
06010050 Evaporator fan motor 200.00
reFrigeraTion CoMparTMenT CoverS
parT no. deSCripTion priCe
1. 08000517 Grill, front, black clad vinyl (ST24) $65.00
08000518 Grill, front, stainless steel (ST24) 95.00
08000497 Grill, bront, black clad vinyl (ST36, ST48, ST60, ST72, ST96) 65.00
2. 08000496 Grill, front, stainless steel (ST36, ST48, ST60, ST72, ST96) 95.00
08000499 Cover, back, black clad vinyl (ST36, ST48, ST60, ST72, ST96) 30.00
3. 08000498 Cover, back, stainless steel (ST36, ST48, ST60, ST72, ST96) 95.00
08000500 Cover, back, galvanized (ST36, ST48, ST60, ST72, ST96) 50.00
08000494 Side, left, stainless steel (ST36, ST48, ST60, ST72, ST96) 95.00
08000495 Side, left, black clad vinyl (ST36, ST48, ST60, ST72, ST96) 65.00