Glide Gear DEV-1000 User manual

About The DEV-1000 Camera Slider
Giving you the ability to produce dazzling, cinema-quality production shots and all while maintaining budget, that’s what the
Glidegear DEV-1000 Camera Slider was created for. With features such as durable anodized aluminum construction, spirit level and
tension adjustment, and self-lubricating glide rails, the DEV-1000 Camera Slider offers the best value for money. The DEV-1000 is
versatile; it can be used with a tripod or also as a stand-alone with its own feet, which can approximately raise your camera setup 2”
from the ground.
FEATURES
• 23.6” (60cm) long track
• Quick set up; ready to use in a few minutes
• Self-lubricating rails
• Spirit level
• Can be used on tripod or on any flat surface with its included feet
• Tension adjust/locking knob
• Anodized aluminum construction
• Smooth, professional, cinema-quality production shot capability
SPECIFICATIONS
Track Length 23.6” (60cm)
Compatible Thread Sizes 1/4” and 3/8”
Material Anodized Aluminum
Tripod compatible Yes
Swivel/Pan head compatible Yes
Spirit level Yes
Dimensions (LxWxH) 23.6” x 3.5” x 2.7” (60cm x 8.9cm x 6.8cm)
Weight 1.9lbs (860g)
IN THE BOX
• 23.6” camera slide rails/track
• Camera mount platform
• Camera slider feet (2 pieces)
• Hex screws (4 pieces)
• 1/4” to 3/8” thread adapter
• Allen key
• Product guide
DEV-1000 Camera Slider

ASSEMBLY
1. Slide in the camera platform to the track
2. Use the Allen key and the hex screws to attach the feet
3. Secure the camera or tripod head to the platform
4. To attach your camera to the platform, position platform to the center and insert the Allen key in the pre-drilled center hole
to tighten
OPTIONAL ACCESSORIES
Track Extension
Glidegear 23” Extended Track (track only)
Tripod Head
Glidegear Fluid Tripod Head SYL-707
ONE (1) YEAR LIMITED GLOBAL WARRANTY
You are now the owner a Glidegear Camera Slider that has been manufactured under exact standards, and with demanding
quality control requirements through various stages of the manufacturing process. The Glidegear Camera Slider is guaranteed by
its makers against defects due to workmanship or materials for one (1) year from date of purchase. Glidegear will either repair or
replace equipment for free that is returned to Glidegear in the USA. The item must have with proof of date of purchase, such as an
official receipt. Out warranty does not extend to damage to the product incurred through accident, abuse, use in extreme conditions
(including but not limited to: water, sand, mud, snow, etc.), or if the product has undergone any sort of modification. A number
of states do not allow certain conditions on the repair of products with warranties, so the above may not apply to you. Under no
circumstance will Glidegear be liable for incidental, consequential, or special damages, even if such damages result from negligence
or other fault.
To find out more about support and repair information, contact Glidegear at camera-stabilizer.org
Glide Gear DEV-1000 Camera Slider