GlideScope GVL User manual

GlideScope GVL®and Cobalt
User’s Manual & Quick Reference Guide
0900-1204-07-20

GlideScope GVL®and Cobalt
Quick Reference Guide

Corporate Headquarters:
Verathon Inc.
20001 North Creek Parkway,
Bothell, WA 98011 USA
800.331.2313 (Canada and US)
425.867.1348
Fax: [phone]
verathon.com
Verathon Medical (Europe) B.V.
Linnaeusweg 11
3401 MS, IJsselstein
The Netherlands
+31.30.68.70.570
Fax: [phone]
verathon.eu
Manufacturer
Verathon Medical (Canada) ULC
2227 Douglas Road
Burnaby, BC V5C 5A9
Canada
604.439.3009
Fax: [phone]
For additional contact information please visit verathon.com.
GlideScope, the GlideScope symbol, GlideRite, GVL, Verathon, and the
Verathon Torch symbol are trademarks of Verathon Inc. All other brand
and product names are trademarks of their respective owners.
The GlideScope®technology is covered under US Patents (6,655,377)
(6,543,447) as well as European Patent 1307131. Additional patents
pending.
Information in this User’s Manual and Quick Reference Guide may
change at any time without notice. For the most up-to-date information,
see the online manuals on verathon.com.
GlideScopevideo laryngoscope systems are CE marked in accordance
with the Medical Device Directive, and the Verathon Inc. quality system
is Quality System Certified to ISO 13485:2003 standards.
© 2009–2011 Verathon Inc. No part of this manual may be copied or
transmitted by any method without the express written consent of
Verathon Inc.
PN 0900-2100-05-20

GlideScope System Quick Start
The monitor may be used immediately by
plugging it into an AC power source, or by
fully charging the battery prior to rst use.
To ensure proper charging, follow these steps
in order:
• Make sure the AC power cord is
disconnected and the power switch is in
the OFF position.
• Slide the power switch at the back of the monitor to the ON position.
• Plug the monitor into an AC power source:
◦ Insert the female end of the power cord into the port on the back
of the monitor.
• The charge status LED will turn orange, indicating that the recharging
cycle has begun.
• When charging is complete, the status LED will turn green. At this
point the unit is fully functional on battery power.
If the AC power cord is inserted before
the power switch is in the ON position, the
charge status LED will ash orange.
Connect the video laryngoscope to the
monitor.
• If using the GVL®:
Connect either end of the video cable
to the GVL connector. Connect the
video cable to the monitor connector.

GlideScope, the GlideScope symbol, GVL, Verathon and the Verathon Torch symbol are trademarks of Verathon Inc. © 2008, 2010, 2011 Verathon
Inc. GlideScope video laryngoscope systems are CE marked in accordance with the Medical Device Directive, and the Verathon Inc. quality
system is Quality System Certied to ISO 13485:2003 standards.
Corporate Headquarters:
Verathon Inc.
20001 North Creek Parkway
Bothell, WA 98011, USA
Tel: [phone] (US and Canada only)
Tel: [phone] Fax: [phone]
M
Manufacturer:
Verathon Medical (Canada) ULC
2227 Douglas Road
Burnaby, British Columbia
Canada, V5C 5A9
P
EC Representative:
Verathon Medical (Europe) B.V.
Linnaeusweg 11
3401 MS IJsselstein Netherlands
Tel: [phone]
GlideScope System Quick Start
• If using the Cobalt system:
Connect the video baton
to the monitor as shown in
step #3. Then slide a single-
use GVL Stat over the video
baton.
To detach a GVL Stat from a Cobalt video baton, grasp the base of
the video baton and pull rmly.
LED State Meaning
Steady green
CHARGE
STATUS
The battery is fully charged and ready for use.
Flashing orange Flashing orange can indicate two states:
• If the AC power is connected and the power
switch is off ("O" - to the left), the CHARGE
STATUS LED will ash orange. The monitor will still
function but the battery will not charge.
• If the AC power is NOT connected and the
CHARGE STATUS LED ashes orange, the battery
is malfunctioning.
Steady orange Charging in progress
verathon.com
0900-2077-04-60
IMPORTANT! A used GVL Stat is a biohazard and should be disposed of in
compliance with local protocols.
Stat Video
baton
CHARGE
STATUS
CHARGE
STATUS

Cleaning and Disinfecting the
GlideScope GVL and Cobalt Video Baton
• DONOTexposetotemperaturesabove60oC(140oF).
Do not disinfect using devices such as autoclaves, ultrasonic cleaners or pasteurizers.
• The GlideScope GVL® is a nonsterile, reusable device. It is required that the GlideScope GVL
is cleaned and disinfected after every patient use using a High Level Disinfectant method.
• The GlideScope Cobalt video baton is a nonsterile, reusable device. When used as
intended, it is protected from direct contact with the patient by the sterile, single-use GVL
Stat. Low Level Disinfection is recommended for the video baton after every patient use.
High Level Disinfection is required for the GlideScope Cobalt video baton when it is visibly
soiled.
Disconnect the GVL or video baton from the monitor.
Place the cleaning cap over the connector as shown.
• During cleaning, the protective cap must be inserted as shown to protect the
cable connector.
Wash the GVL or video baton manually to remove all foreign material from the
surface of the device.
• Chemical compatibility and disinfection methods are detailed in the user’s manual.
• To clean the exterior of the monitor and the video cables, wipe with IPA (70%
isopropyl alcohol) bleach (100ppm) or a mild detergent and water.
• Wipe the cradle with a standard hospital-grade surface cleaning product.
FormoredetailedcleaninginstructionsseetheGlideScopeGVL/CobaltUser’sManual.
GlideScope® Cobalt
Cleaning Cap
GVL Cobalt video baton
Video baton
cleaning cap
Correct
cleaning
position

GlideScope, the GlideScope symbol, GVL, Verathon and the Verathon Torch symbol are trademarks of Verathon Inc. © 2008, 2010, 2011 Verathon Inc.
GlideScope video laryngoscope systems are CE marked in accordance with the Medical Device Directive, and the Verathon Inc. quality system is
Quality System Certied to ISO 13485:2003 standards.
CorporateHeadquarters:
VerathonInc.
20001 North Creek Parkway
Bothell, WA 98011, USA
Tel: [phone] (US and Canada only)
Tel: [phone] Fax: [phone]
Attaching/Detaching the GlideScope
GVL or Cobalt Video Baton
Insert the GVL® or Cobalt video baton cable into
the port located on the face of the monitor so that
the arrows on the cable and the monitor line up.
For GVL only: Attach the opposite end of the
video cable to the port located on the GVL.
Note: When connecting and disconnecting the cable,
grasp the connector by the gray sleeve.
Insert the Cobalt video baton into the sterile,
single-use GVL Stat until it clicks into place.
Ensure proper insertion by matching the
GlideScope logo on the side of the video
baton and the GVL Stat.
Detach the video baton from the GVL Stat
by grasping the base of the video baton and
pulling rmly.
Attaching/Detaching the
GlideScope Cobalt Video Baton and Stat
verathon.com
0900-2013-07-60
Stat
IMPORTANT!A used GVL Stat is a biohazard and should be disposed
of in a manner consistent with local directives in the user’s jurisdiction.
Video
baton
M
Manufacturer:
VerathonMedical(Canada)ULC
2227 Douglas Road
Burnaby, British Columbia
Canada, V5C 5A9
P
ECRepresentative:
VerathonMedical(Europe)B.V.
Linnaeusweg 11
3401 MS IJsselstein Netherlands
Tel: [phone]
Fax: [phone]t

The GlideScope
4-Step Technique
Looking directly into the patient’s mouth
and with the GlideScope in the left hand,
introduce the video laryngoscope into the
midline of the oral pharynx.
With the laryngoscope inserted, look to
the monitor to identify the epiglottis, then
manipulate the scope to obtain the best
glottic view.
Looking directly into the patient’s mouth,
not at the screen, carefully guide the
distal tip of the tube into position near the
tip of the laryngoscope.
It is important to look into the mouth at this step to
avoid injuring the tonsils or soft palate.
Look to the monitor to complete the
intubation; gently rotate or angle the tube
to redirect as needed.
GlideScope video laryngoscope systems are CE marked in accordance with the Medical Device Directive, and the Verathon Inc. quality system
is Quality System Certied to ISO 13485:2003 standards.

• Verathon® recommends inserting the GlideScope video
laryngoscope down the midline of the tongue to the epiglottis.
• The GlideScope video laryngoscope may be used to produce a
Macintosh indirect lift of the epiglottis or a Miller lift.
• Intubations using GlideScope video laryngoscopes require
approximately 0.5–1.5 kg of lifting force.
• Use of an endotracheal tube stylet
is recommended. The GlideRite®
Rigid Stylet is designed to
complement the angle of the
GlideScope video laryngoscope to
facilitate intubation. A malleable
stylet may be used with a 60– 90°
angle.
• To aid the passage of the endotracheal
tube, withdraw the stylet (approx. 5 cm)
while gently advancing the ETT. A 1 cm
adjustment (withdrawal) of the laryngoscope
also may be benecial to reduce the viewing
angle and allow the glottis to drop.
verathon.com
0900-1436-10-60
GlideScope, the GlideScope symbol, GVL, GlideRite, Verathon, and the Verathon Torch symbol are trademarks of
Verathon Inc. © 2009, 2010, 2011 Verathon Inc.
Corporate Headquarters:
Verathon Inc.
20001 North Creek Parkway
Bothell, WA 98011, USA
Tel: [phone] (US and Canada only)
Tel: [phone] Fax: [phone]
M
Verathon Medical (Canada) ULC
2227 Douglas Road
Burnaby, British Columbia
Canada, V5C 5A9
P
Verathon Medical (Europe) B.V.
Linnaeusweg 11
3401 MS lJsselstein Netherlands
Tel: [phone]
Fax: [phone]
Tips for GlideScope
Video Laryngoscope Insertion

GlideScope® System
Quick Reference Guide 1
Important Information
Statement of Prescription
Federal (USA) law restricts this device for sale by or on the order
of a physician.
The GlideScope video laryngoscope system should be used only
by individuals who have been trained and authorized by a
physician, or by health care providers who have been trained
and authorized by the institution providing patient care.
Intended Use
GlideScope video laryngoscopes are intended for use by
qualified medical professionals to obtain a clear, unobstructed
view of the vocal cords for medical procedures.
Warnings and Cautions
Caution. Risk of permanent equipment damage.
Do not expose GlideScope video laryngoscopes or Cobalt video
batons to temperatures above 140° F (60° C). Do not disinfect
GlideScope video laryngoscopes or Cobalt video batons using
devices such as autoclaves, ultrasonic cleaners, or pasteurizers.
Use of such methods will cause permanent device damage and
void the warranty
Equipment Caution: Electrical shock hazard. Refer servicing
to qualified personnel.
This equipment has been tested and found to comply with the
standards listed in the Approvals section of this manual. These
limits are designed to provide reasonable protection against
harmful interference in typical medical installations.
.
CAUTION: Risk of equipment damage.
Failure to cover the cable connector port with the protective cap
prior to cleaning may result in water ingress and potential device
failure.
Bleach can be used on the baton but with special attention to the
connector. Bleach may corrode the stainless steel inserts and
damage the connector pins.
CAUTION: Potential interference with other devices.
GlideScope video laryngoscopes must be used with the supplied
cables to maintain electromagnetic interference (EMI) within
certified limits.