Global Industrial 293117 User manual

1
MODEL # 293117
User's manual Manual del usuario Manuel de l'utilisateur
Customer Service
US: 1-800-645-2986
Servicio de atención al Cliente
US: 1-800-645-2986
Service à la clientèle
Canada: 888-645-2986
Global Industrial™ Portable
Spot Cooler Air Conditioner,
6,475 BTU, 115V
Model: 293117

2
Portable Spot Cooler AC
NOTE:
Be sure to follow the safety precautions to prevent accidents or dangers in advance by using the
product safely and correctly.
User Manual
1 Safety Precautions
Use the rated voltage marked on the side of the air
conditioner; otherwise, it may cause fire or electric
shock.
Do not use a damaged power cord or plug or a loose
outlet. There is a risk of electric shock, short circuit, or
fire.
Do not pull out the cord or touch the power plug with
wet hands. There is a risk of electric shock.
Do not put your hands or foreign object into the air
outlet or air inlet. Please be careful with children.
Do not unplug the power plug while the product is in
operation. There is a risk of electric shock.
When using an extension cord, check the current of the
product being used and use a cord that meets the
rating. When using an extension cord, use it alone;
otherwise, it may cause fire or electric shock.
After stopping the operation, unplug the power plug, and
clean when the fan has stopped; otherwise, it may cause
electric shock.
If there is a strange sound, burning smell, or smoke
during operation, stop operation immediately and
contact the service center. If you continue to operate in
an abnormal state, there is a risk of malfunction,
electric shock, or fire.

3
Portable Spot Cooler AC
NOTE:
Be sure to follow the safety precautions to prevent accidents or dangers in advance by using the
product safely and correctly.
User Manual
1 Safety Precautions (Cont'd)
Do not disassemble, repair, or remodel. There is a risk of
electric shock, breakdown, or fire when disassembling
and modifying.
Do not move the product while it is in operation.
There is a risk of malfunction or accidents.
Do not install the product on uneven or sloping floors. Do not spray directly with water or clean with benzene,
thinner, or alcohol. There is a risk of electric shock or
fire.
2 Notes on Installation
Operating Temperature
64 - 113°F
ICEN Terms of Use
There is a limit to the outside temperature and humidity range when using ICEN. Operation outside of temperature
and humidity conditions may cause malfunction.
Operating Humidity
80%
Selection of Operation Location
Warning
•
•Do not use in explosive environments or in locations where there is a possibility of a
flammable gas leakage.
•Do not use in locations exposed to rain or water.
•Do not use the product in corrosive environments.
•Use only within operating temperature and humidity. (Operating temperature 64-113°F,
humidity 80% or less). After receiving the product, leave it on for 1 to 2 hours or more
to stabilize the refrigerant before turning it on.

4
Portable Spot Cooler AC User Manual
2 Notes on Installation (Cont'd)
Transporting Product
•Operate product on a flat surface.
•There may be residual moisture inside the product. When moving the product, be sure to empty the water
tank and be careful not to fall or collide.
Connecting to Power
•Check that there is no dust or foreign matter on the surface of the power outlet and cord.
•If there is dust or foreign matter, wipe off with a clean, dry cloth before use.
•Check that the power cord is not damaged and that it is suitable for power supply.
•In case of damage or inadequate power supply, contact a qualified electrician.
3 Product Diagram & Parts
1.. Duct hose
2. Switch box
3.. Filter
6.. Caster wheels
4. Water tank
5. Air inlet
1. Duct hose: Where cool air is discharged. Duct can be rotated 360 degrees.
※Be careful not to let foreign substances enter the bellows. Refer to page 5 for how to install duct hose.
2. Power: On/off
Operation Speed: Low/high
3. Filter: Dust accumulation on the filter will reduce performance. Therefore, periodic cleaning is required. To
remove the front filter, hold the filter handle and remove the filter.

5
Portable Spot Cooler AC User Manual
3 Product Diagram & Parts (Cont'd)
How to Install Duct Hose
4. Water tank: Be sure to add water to water tank before usage.
Removing water tank - Lift handle at the center of water tank upwards slightly to take it out.
Inserting water tank - Hold the handle at center of water tank and push it down.
5. Air inlet: Do not obstruct or place objects near the suction port.
6. Caster wheels: Used to move product
1. After inserting the elbow pipe (A) into the connection part (B) of the body, tighten the lever handle under
the duct (A) by turning it counterclockwise.
2. After inserting the duct hose (C) into the duct (A), turn it to the left to fasten it.
Unlock Lock
4 Operation Instructions
Operation Mode and Speed
2))- Power is OFF
/2:- /RZVSHHG
HIGH - High speed
Plasma ions are simultaneously
generated when unit is in operation.
NOTE:
If the ambient temperature is out of operating range, 64 - 113°F, the compressor will automatically
stop and the fan will continue to run. If only the fan blows continuously, a malfunction may have
occurred in the product. Take A/S measures and operate again.

6
Portable Spot Cooler AC User Manual
5 Wiring Diagram
switch terminal numbering
A
2
B
13
C
EVA'
MOTOR
EM
H
L
CF
CM
E
L
N
LED
LAMP RN
RL
C
C
R
S
COMP'
L
EM
C
RL
CF
R
N-2
RR
S
C
COND'
MOTOR
CM
3
B
A
N-1
N-2
N-1
1
2
H
L
Power
1P AC 100 / 115V,
50/60Hz
RN
N-1
6 Operating Location Precautions
•When using the product, the air intake and bellows hose must be kept at least 1 foot away from the wall or any
other obstacles. The hot air outlet must be kept at least 2 feet away from any obstacles.
•The product must be placed and operated on a flat surface. Accidents may occur if installed on an incline,
uneven floor, or at an entryway.
•To avoid accidents, do not use in places exposed to rain or water.
•Do not place objects in front of the air inlet, in front of the hose duct, or hot air outlet. Do not place hot air
outlet near objects with poor heat resistance.
7 Maintenance and Storage
Filter Cleaning
•If dust accumulates on the filter at the front of the product, the cooling capacity will decrease, so it is
recommended to clean the filter periodically depending on operation environment.
•To clean the filter, turn off the product, remove the filter, and soak it in detergent or gently clean with a soft
brush, then dry it completely before re-installing it for use.
Caution When cleaning the surface of the machine, do not use any chemicals that may damage
the surface of the machine (e.g. thinner, gasoline, or other chemicals).

6
Portable Spot Cooler AC User Manual
7 Maintenance and Storage (Cont'd)
Machine Body Cleaning
•Clean the main body only. Do not attempt to take machine apart.
•Moisten a soft cloth with water or neutral detergent, etc., and spot clean any contaminated areas.
•When cleaning the main body, be careful not to let water enter the gaps and vents of the product.
Storage
When not in use, store product upright and cover with plastic to prevent foreign substances from entering
the opening on the side of the duct hose.
8 Troubleshooting
Problem Probable Cause Solution
Air conditioner
not turning on
Power is not connected Connect the power.
Room temperature is
too high
Please use it within the
range of 64 - 113°F.
Input voltage is too high
or too low
Please contact the
customer center.
Compressor failed Please contact the
customer center.
Leaking
Drain pipe outlet is
blocked
Please contact the
customer center.
Position of the water
tank is not correct Reposition the water tank.
Water tank is full Empty the water tank..
Air conditioner is
not cool When it comes to
refrigerant
Please contact the
customer center.

7
Portable Spot Cooler AC User Manual
9 Product Specifications
Specification 293117
Voltage 115V / 60Hz
Cooling Capacity 6,745 BTU (2000W)
Power Consumption 720W
Rated Current 6.38A
Refrigerant R410A (330g)
Weight 53 lbs
Dimension 19x11x22