Global Industrial 436978BK User manual

1
User's manual Manual del usuario Manuel de l'utilisateur
Customer Service
US: 1-800-645-2986
Servicio de atención al Cliente
US: 1-800-645-2986
Service à la clientèle
Canada: 888-645-2986
REF. DESCRIPTION PICTURE QTY
ALeg 2
BSupport
Tube 2
CEnd Slats 4
DSlats 5
ESupport
Ribs 2
FBolt 4
GSelf
Drilling
Screw
36
HScrew 28
IAllen Key 1
Warning
• Assembly and installation of
equipment should be performed
by 2 people.
• Workers should use OSHA
approved safety and lifting
equipment.
Warning
• Ensure that the bench is
installed on a level surface.
• Ensure surface is of a strong
material, preferably concrete.
• Use proper mounting
hardware.
Warning
• Do not climb on, under or
through tables and benches.
• Two people required to move
tables and benches.
• Do not use if any parts of
bench or table are broken or
damaged.
• Inspect and tighten hardware
every six months.
• Replace rusted hardware and
damaged components.
NOTE: Mounting hardware is
not included.
Models: 436978BK
Aluminum Park Bench
With Backrest

2
Aluminum Park Bench
With Backrest
Step 1:
Connect the 2 support tubes
(Ref. B) with both legs (Ref. A)
with bolts (Ref F). Do not fully
tighten.
Step 2:
Place both support ribs (Ref.
E) evenly spaced on top of the
support tubes.
Step 3:
Insert and connect both end
slats and slats (Ref. C and Ref.
D) in between the legs with
screws (Ref. H) on both ends. Do
not fully tighten. Repeat this with
both the seat and backrest slats.
Step 4:
Screw down the support ribs
with the self drilling screws (Ref.
G). Fully fasten all screws
NOTE: Mounting hardware is
not included.
User Manual