Global Industrial 436CP50 BK User manual

User's manual Manual del usuario Manuel de l'utilisateur
Customer Service
US: 1-800-645-2986
Servicio de atención al Cliente
US: 1-800-645-2986
Service à la clientèle
Canada: 888-645-2986
1
Models: 436CP50 BK/RD/BL/GN/GY
Octagonal Picnic Table
Contents
Ref. Qty. Description
1 4 Right Leg
2 4 Left Leg
3 1 Leg Support
4 1 To p
5 4 Bench
H1 28 M8 x 25 mm Hex Bolt
H2 56 Washer
H3 28 M8 Nylon Lock Nut
Warning
• Assembly and installation of
equipment should be performed
by 2 people.
• Workers should use OSHA
approved safety and lifting
equipment.
Warning
• Ensure that the bench is
installed on a level surface.
• Ensure surface is of a strong
material, preferably concrete.
• Use proper mounting
hardware.
Warning
• Do not climb on, under or
through tables and benches.
• Two people required to move
tables and benches.
• Do not use if any parts of
bench or table are broken or
damaged.
• Inspect and tighten hardware
every six months.
• Replace rusted hardware and
damaged components.

Octagonal Picnic Table
2
User's Manual
2
Attach the remainder of the right and left legs. Then attach leg
support in the middle. Ensure that the right leg, left leg, and leg
support are all fastened together. Follow same hardware pattern
as step 1. Do not fastened tightly.
3
3
Attach bench tops to the ends of the legs using the hardware provided. Follow
same hardware pattern as step 1. Do not fastened tightly. Once all benches
are attached, flip table up and fasten all hardware tightly.
5
1
H1 (x8) H2 (x16)
H3 (x8)
Lay table top on the ground , bottom up. Attach 1 right leg and
1 left leg onto each corner using the hardware provided. Do not
fastened tightly.
NOTE: Circular anchoring plates should be facing each other.
4
1
2
NOTE: Anchoring hardware not included.
3