Global Light & Power LCC WL220149 User manual

www.globallightllc.com [e-mail] Fax: [phone]Tel: [phone]
INSTALLATION INSTRUCTION
WL220149
Important Instructions. Please read first.
•Please follow instructions carefully. Failure to do so will void the warranty. Please ensure installation complies with
local law and applicable standards.
1. Ensure correct input voltage is supplied to the luminaire.
2. Ensure the power is disconnected before making any connections.
3. Do not make modification nor alter the luminaire without written approval from GLP.
4. Ensure to keep luminaire in a clean area free of debris.
INSTALLATION
•Step 1: Find a location where the luminaire has to be installed. Install a suitable wiring from the main supply
(110 - 260VAC50/60Hz) to the luminaire.
•Step 2: Remov e the mounting bracket from the luminaire.
•Step 3: Pull out input (110-260VAC50/60Hz ) cable from the wall where luminaire has to be installed . Install
mounting bracket using fischer and stainless steel screws as illustrated.

www.globallightllc.com [e-mail] Fax: [phone]Tel: [phone]
•Step 4: Connect the luminaire to power supply using terminals and wrap the connection using
3M tape and electrical tape.
•Step 5: Mount the luminaire on the bracket using screws.