Global Pool Products TSUNAMI User manual

“Global Pool Products is committed to engineering and manufacturing world class products in the pool industry”
Page | 1
www.global-poolproducts.com

“Global Pool Products is committed to engineering and manufacturing world class products in the pool industry”
Page | 2
TSUNAMI SLIDE
TABLE OF CONTENTS
Slide Warning PAGE - 3
Pool Slide Safety Guidelines PAGE - 4
Post Installation Checklist PAGE - 5
Daily/Weekly Maintenance PAGE - 5
Assembly & Installation PAGE - 5
TSUNAMI Slide Placement/Stub-Up PAGE –6
Cleaning Instructions PAGE –7
Slide Warranty Page –8-10
Warranty Registration PAGE - 11
Global Pool Products
Bad
1330 Pigeon Rd
Axe, MI 48413
Information contained in this document is proprietary and confidential to
P: 989-269-5900 - TF: 866-712-0606 Global Pool Products and not to be reproduced without
Fax: [phone] written consent from Global Pool Products.
www.global-poolproducts.com

“Global Pool Products is committed to engineering and manufacturing world class products in the pool industry”
Page | 3
SLIDING HEAD FIRST IS STRONGLY
DISCOURAGED AND HIGHLY DANGEROUS
Traumatic Brain Injury and/or spinal injuries can commonly result from
sliding head first down a slide into shallow areas of pools. These injuries
could have long-term effects or even permanent damage. It is vital to slide
down with the slider in a seated position, facing forward with feet first.
Safety Compliance
Global Pool Product slides are 3rd Party Tested & Verified by St. Louis Testing Laboratories. Global Pool Product
slides fully conform to the U.S. Consumer Product & Safety Commission Safety Standards for swimming pool
slides (16 CFR Part 1207).

“Global Pool Products is committed to engineering and manufacturing world class products in the pool industry”
Page | 4
THE TSUNAMI SLIDE is designed for in ground residential swimming pools ONLY. The
TSUNAMI SLIDE must be properly assembled, installed, used, and supervised for proper
use and operation to reduce the risk of serious injury and/or death.
Position yourself properly before starting your slide ride. Slide in a seated position, forward facing, feet
forward. REMEMBER: DO NOT GO HEAD FIRST DOWN A SLIDE
If you do not know how to swim, do not use the slide until you learn how to avoid drowning.
No jumping or diving from any part of the slide.
No horseplay or shenanigans on the slide.
One person at a time on the slide; maximum weight allowance for the slide rider is 275 lbs.
Make sure you know how deep the water is prior to sliding.
Look and make sure no one is swimming at the bottom of the slide. Avoid collisions with other objects
or swimmers and do not start sliding until the exit area of the slide is clear.
Do not slide if under the influence of drugs or alcohol.
Individuals with physical disabilities need to be cautious and my need help using the slide.
If you are pregnant, do not use the slide.
If you have any medical conditions that could inhibit your reaction time, please consult your physician
before using the slide.
When going up the ladder, please hold onto the molded hand rails the entire time you are ascending.
DO NOT GO ON THE SLIDE if it is deteriorated or fractured. Block the ladder access and have the slide
repaired.
ADULT SUPERVISION IS ALWAYS REQUIRED WHEN CHILDREN ARE
PLAYING
ADHERE TO FOLLOWING THE SAFETY GUIDELINES
EDUCATE ALL SLIDE RIDERS ON THE IMPORTANCE OF FOLLOWING
THE SAFETY GUIDELINES USING THE SLIDE.

“Global Pool Products is committed to engineering and manufacturing world class products in the pool industry”
Page | 5
POST INSTALLATION CHECKLIST FOR TSUNAMI SLIDE
Installer to review with slide owner upon completion of slide installation.
Examine:
The flume for any apparent cracks or gashes.
The ladder for sharp borders, snags, cracks, or gashes.
All fasteners to make sure none are loose.
The ladder for stability and connection to the flume.
Pool water depth at the base of the slide should be at least 3’ (914 mm) deep.
The height of the slide flume exit above the water should be 20” (508 mm) maximum.
The distance between the slide centerline and the edge of other pool equipment should be at
least 3’6” (1067 mm).
DAILY/WEEKLY MAINTENANCE OF THE TSUNAMI ®
A. Spray your TSUNAMI Slide down with water to wash away build up.
B. Be sure that all connection points are tight. If not, tighten anchors as necessary.
C. All polyethylene parts require little maintenance. Hose and wipe to clean.
Examine:
The flume for any apparent cracks or gashes.
All fasteners to make sure none are loose.
The ladder and inner flume for sharp borders, snags, cracks, or gashes.
APPLICABLE STANDARDS AND CODES
The TSUNAMI must be installed following your local building codes and national building codes
ASSEMBLY AND INSTALLATION
TSUNAMI Slides are inspected prior to shipment from the factory. The installer will need to make sure
that the concrete pad meets requirements before taking any steps to install the slide. Global Pool
Product’s warranty will be voided if the TSUNAMI is not installed and constructed per the installation
& assembly guide.

“Global Pool Products is committed to engineering and manufacturing world class products in the pool industry”
Page | 6
TSUNAMI Slide Placement/Stub-up Location
Global Pool Products
Bad
1330 Pigeon Rd
Axe, MI 48413
Information contained in this document is proprietary and confidential to
P: 989-269-5900 - TF: 866-712-0606 Global Pool Products and not to be reproduced without
Fax: [phone] written consent from Global Pool Products.
www.global-poolproducts.com

“Global Pool Products is committed to engineering and manufacturing world class products in the pool industry”
Page | 7
CLEANING INSTRUCTIONS
Use nonabrasive soap and water as often as possible.
The TSUNAMI is a polyethylene surface. Before using any cleaner, always
review the label instructions to make sure that it is safe to be used. We
strongly suggest that a test spot is used before using a cleaner on a large
area of the slide. This will deter any chances of damage or discoloration to
the slide.
Keep clear of any abrasive or harsh cleaners,
chemicals and/or disinfectants that could damage the
slide.

“Global Pool Products is committed to engineering and manufacturing world class products in the pool industry”
Page | 8
Global Pool Products Slide Warranty
All Global Pool Products slides have a 3 Year Limited Warranty on the slide components (not including the fasteners)
to the original retail end user only products manufactured by Global Pool Products, when properly installed in
accordance to the assembly and installation instructions, and when the equipment is properly used and maintained,
to be free from material defects and workmanship as stated below:
Warranty starts from date of original purchase
Slide structure has a 3 year warranty against material defects and workmanship
This warranty does not cover damages to ANY of our slides due to: accident, abuse, negligence, misuse, damage by
improper use of chemicals, fading, ice damage, fire, rust to fasteners, exceeding the weight capacity for model
purchased, failure to install or to assemble the product in accordance with the installation and assembly instructions,
normal wear and tear from day to day use, not maintained properly, or if unit is altered or repaired without written
approval of Global Pool Products –All Warranties are Void.
To commence the warranty claim process of a Global Pool Products product, in writing provide place of purchase
along with the product name and description, date of installation and a detailed description of the defect, along with
a photo of the entire product and claimed defect to the dealer or distributor the Global Pool Products slide was
purchased from. Prior to a 30 day period after receiving the written warranty claim from the dealer or distributor by
Global Pool Products and barring any unforeseen delays, the claimant will be notified of Global Pool Products
decision regarding the claim.
If the request made by Global Pool Products for the product to be returned to its factory or distributor of choice for
inspection and/or repair, purchaser will be liable for “Freight Prepaid”. Global Pool Products (at its option) will
replace or repair the defective item and deliver the repaired product or replacement to the buyer of the product to
the destination on file in regards to the original order. Parts and Products returned for replacement to Global Pool
Products shall remain the property of Global Pool Products under this limited warranty.
A new warranty period shall not be established for any repaired or replaced products. Replaced or repaired products
will remain under warranty only for the remainder of the original warranty period for the original product
purchased. No person or organization is authorized to make any other specific or implied warranties on behalf of
Global Pool Products.

“Global Pool Products is committed to engineering and manufacturing world class products in the pool industry”
Page | 9
THE WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, WHICH ARE HEREBY
DISCLAIMED AND EXCLUDED, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE OR USE.
IN NO EVENT SHALL GLOBAL POOL PRODUCTS BE LIABLE FOR ANY INCIDENTAL, CONSEQUENCIAL, INDIRECT, SPECIAL
EXEMPLARY OR PUNITIVE DAMAGES OR LOST PROFITS FROM ANY BREACH OF THIS LIMITED WARRANTY.THE SOLE
AND EXCLUSIVE REMEDY OF THIS WARRANTY IN REGARDS TO GLOBAL POOL PRODUCTS PRODUCT SHALL BE LIMITED
TO REPLACEMENT OR REPAIR AT A GLOBAL POOL PRODUCTS FACILITY OR A DULY APPOINTED DISTRIBUTOR’S
LOCATION OR AT A GLOBAL POOL PRODUCTS DESIGNATED LOCATION. IN NO EVENT SHALL GLOBAL POOL
PRODUCTS LIABILITY EXCEED THE ENTIRE AMOUNT PAID TO GLOBAL POOL PRODUCTS BY THE ORIGINAL PURCHASER
IN REGARDS TO THE DEFECTIVE OR FAILED PRODUCT.
NO REPRESENTATIVE OF GLOBAL POOL PRODUCTS SUCH AS AGENTS, DISTRIBUTORS AND DEALERS HAS THE
AUTHORITY TO ALTER IN ANY FASHION THE TERMS OF THIS WARRANTY AND GLOBAL POOL PRODUCTS IS “NOT”
RESPONSIBLE FOR REPRESENTATION, UNDERTAKING OR WARRANTY MADE BY ANY OTHER PERSON BEYOND THE
WARRANTIES EXPRESSED SET FORTH IN THIS WARRANTY.
Warranty Procedure
Warranty Claims shall be submitted to Global Pool Products by the dealer or distributor which
originated the sale with Global Pool Products.
All RGA (Return Goods Authorization) documents shall be requested by and issued only to the dealer
or distributor which originated the sale.
Global Pool Products shall determine warranty coverage validation and replacement parts or repair
shall be directed to the dealer or distributor which originated the sale. Pictures may be requested to
validate claim.
Warranty claims received from end users by Global Pool Products shall be re-directed to the dealer or
distributor which originated the sale with Global Pool Products.

“Global Pool Products is committed to engineering and manufacturing world class products in the pool industry”
Page | 10
Page Intentionally Left Blank

“Global Pool Products is committed to engineering and manufacturing world class products in the pool industry”
Page | 11
GLOBAL POOL PRODUCTS
WARRANTY REGISTRATION
PURCHASED BY:
Name:______________________________________________________
City: ______________________________ State: ___________ Zip: ___________
Phone: (_____) ______________________________
DEALER:
Name: ____________________________Phone Number___________________
City: __________________________ State: _______________ Zip: ___________
Phone: (_____) ______________________________
Model: __________________________ Serial Number: ____________________
Color: _______________ Purchase Price: $ _______ Date Purchased: ___________
INSTALLER:
Name: ____________________________Phone Number___________________
City: __________________________ State: _______________ Zip: ___________
Phone: (_____) ______________________________
Model: __________________________ Serial Number: ____________________
Date Installed & Assembled: ___________
I have read and accept the warranty terms.
Signature: ______________________________________ Date: ______________
This card must be completed and returned to Global Pool Products within 30 days of purchase date to assure
coverage.
Please mail to:
Global Pool Products
1330 Pigeon Rd
Bad Axe, MI 48413
Or
Complete, scan and email to: w[email protected]