Global FREEFIT User manual

Effective November 2020
INSTALLATION
MANUAL

FREEFIT TABLE INSTALLATION MANUAL
2 globalfurnituregroup.com
Dear User,
We are delighted that you have chosen a product from Global. We are sure that your FreeFit height-adjustable table will give you
many years of problem-free operation. Before our products leave the factory, they undergo full function and quality testing. Should you
nevertheless experience problems with your FreeFit table, you are always welcome to get in-touch with your local territory manager.
Changes in installation and use of Global products/systems can affect the operation and durability of the products/systems. The products
are not to be opened by unauthorized personnel. The Installation Manual has been written based on our present technical knowledge. We
are constantly working on updating the information and we therefore reserve the right to carry out technical modifications.
Table of Contents
What is Included in the Box 3
Product Ratings 6
Tools Needed (NOT included) 6
Assembly Process 6
Getting the Most from your new Sit-Stand Desk 14
Benefits of Moving 15
Troubleshooting 16
Appendix 19

FREEFIT TABLE INSTALLATION MANUAL FREEFIT TABLE INSTALLATION MANUAL
globalfurnituregroup.com 3
WHAT IS INCLUDED IN THE BOX
WHAT IS INCLUDED IN THE BOX
A. FreeFit SetPack
FreeFit Desk Legs
D. Feet (and/or) Bench Beams
B. FreeFit Frame
1. Clamp
2. Kick Lock
3. (2) Cantilevers
4. Inner Rail
5. Outer Rail
6. (2) Clips
C. Electronics Kit
Control Box
Desk Control
Cables
Hardware pack
Desk Sensor
E. Hardware Pack
(12) Mouting screws for
the column (M6 x16)
(2) 10-12 x 2 Pan head
screws S9: AND(1)
KNC- CLIP
(28) Screws -
Tapping, Pan head
8-15 x 0.625
(2) Handset Steel Flat
Head Screws
(2) Kick Lock (4) Levelers for foot
(M8 x18)
T-Feet or C-Feet
Bench Beam
(Back to Back)Bench Beams
(Freestanding)

FREEFIT TABLE INSTALLATION MANUAL
4 globalfurnituregroup.com
WHAT IS INCLUDED IN THE BOX
A. FreeFit SetPack
FreeFit Desk Legs
D. Feet (and/or) Bench Beams
B. FreeFit Frame
1. Clamp
2. Kick Lock
3. (2) Cantilevers
4. Inner Rail
5. Outer Rail
6. (2) Clips
C. Electronics Kit
Control Box
Desk Control
Cables
Hardware pack
Desk Sensor
E. Hardware Pack
(12) Mouting screws for
the column (M6 x16)
(2) 10-12 x 2 Pan head
screws S9: AND(1)
KNC- CLIP
(28) Screws -
Tapping, Pan head
8-15 x 0.625
(2) Handset Steel Flat
Head Screws
(2) Kick Lock (4) Levelers for foot
(M8 x18)
T-Feet or C-Feet
Bench Beam
(Back to Back)Bench Beams
(Freestanding)

FREEFIT TABLE INSTALLATION MANUAL FREEFIT TABLE INSTALLATION MANUAL
globalfurnituregroup.com 5
Inner Rail x 1 Outer Rail x 1 Cantilever x 2
Foot x 2
Leveler for
Foot x 4 Control Box x 1
Motor
Cable x2
8-15 x 0.625”
Tapping Screw x 28
M6 x 16 mm
PA
CKING LIST
Clamp x 2 Kick lock x 2
Handset x 1
Mains Cable x 1
Desk Leg x 2
Allen Bolt x 12
Tapping Screw x 2
10-12 x 2”
Desk Sensor x 1
(OPTIONAL) BENCH SYSTEMS INCLUDE
M8 x 12 mm
Allen Bolt x 4 M8 x 12 mm
Allen Bolt x 4
Bench Beam
(Back to Back)
Bench Beams
(Freestanding)
Right Left

FREEFIT TABLE INSTALLATION MANUAL
6 globalfurnituregroup.com
Product Ratings
PRODUCT RATINGS
Application of the FreeFit FT5/6 system:
Irrespective of the load, the duty cycle 10% ~ 2 minutes of continuous
use at full load, followed by 18 minutes of pause stated in the data
sheets, must NOT be exceeded as this will result in super heating of the
motor, the brake and the spindle nut. Exceeding the duty cycle will result in
a dramatic reduction of the life of the system.
This product is intended for indoor use only.
W
eight limit for two-leg FT5/6 desk: 1600N (363 lbs
including weight of the desk top.
FreeFit Large Adjustable: Fits desks from 61” to 84”
(frame width 52.75” to 76.3”)
FreeFit Short Adjustable: Fits desks from 41” to 60”
(frame width 38.25” to 50”)
Tools Needed (not included)
1. Place work-surface up-side down on a pad,
blanket, or cardboard box.
Don’t forget to place a protective
blanket, pad or cardboard box, to
protect the desk top during floor
assembly.
Cordless Drill
(Optional)
M8 Allen Wrench
M6 Allen Wrench
Rubber Mallet
(Optional)
Phillips Head
Drill Bit (Optional)
Phillips Head
Screwdriver
2. Gather all parts for desk.
Assembly Process
1.
Place work-surface up-side down on a pad,
blanket, or cardboard box.
Don’t forget to place a protective
blanket, pad or cardboard box, to
protect the desk top during floor
assembly.
Cordless Drill
(Optional)
M8 Allen Wrench
M6 Allen Wrench
Rubber Mallet
(Optional)
Phillips Head
Drill Bit (Optional)
Phillips Head
Screwdriver
2. Gather all parts for desk.

FREEFIT TABLE INSTALLATION MANUAL FREEFIT TABLE INSTALLATION MANUAL
globalfurnituregroup.com 7
Assembly Process Cont’d
3.
Fix inner rail with outer rail
(o
nly Kick & Click Adjustable).
3.
1Extend rails to required length
(f
rame width from 45” to 76.3”)
using holes on rails as a length indicator.
3.2Fix length with clip.
4.
Slide cantilevers onto base of inner and outer rails.
5. Align cantilevers.
Align middle marker on cantilever with center
on inner/outer rail.
Outer markers on cantilever indicates 2” maximum
displacement from center on inner/outer rail.
T-Desk C-Desk
1. Place work-surface up-side down on a pad,
blanket, or cardboard box.
Don’t forget to place a protective
blanket, pad or cardboard box, to
protect the desk top during floor
assembly.
Cordless Drill
(Optional)
M8 Allen Wrench
M6 Allen Wrench
Rubber Mallet
(Optional)
Phillips Head
Drill Bit (Optional)
Phillips Head
Screwdriver
2
. Gather all parts for desk.

FREEFIT TABLE INSTALLATION MANUAL
8 globalfurnituregroup.com
6.
Attach Kick and Click frame to table top.
6.1Screw cantilevers into top using tapping screw.
6.2Screw rails into top using tapping screws. 6.3Screw bases into top using tapping screws.
7.
Attach desk legs to frame bases.
7.
1Mount column by placing it in base.
7.2Place clamp on column housing, press it down gently. It will still be possible to move clamp a
little after placement.
7.3Place kick lock in clamp. Arrow on kick
lock must face arrow on clamp.
7.4Fix kick lock in clamp with your foot. When you
hear a “click,” columns are correctly fixed in place.
7.5Screw two M6 bolts through the base and into
the desk leg using an Allen wrench
Assembly Process Cont’d

FREEFIT TABLE INSTALLATION MANUAL FREEFIT TABLE INSTALLATION MANUAL
globalfurnituregroup.com 9
6. Attach Kick and Click frame to table top.
6.1Screw cantilevers into top using tapping screw.
6.2Screw rails into top using tapping screws. 6.3Screw bases into top using tapping screws.
7. Attach desk legs to frame bases.
7.1Mount column by placing it in base.
7.2Place clamp on column housing, press it down gently. It will still be possible to move clamp a
little after placement.
7.3Place kick lock in clamp. Arrow on kick
lock must face arrow on clamp.
7.4Fix kick lock in clamp with your foot. When you
hear a “click,” columns are correctly fixed in place.
7.5Screw two M6 bolts through the base and into
the desk leg using an Allen wrench
Assembly Process Cont’d

FREEFIT TABLE INSTALLATION MANUAL
10 globalfurnituregroup.com
9.
Electronics Assembly
9.
1Connect mains, cable, motor cables, and handset switch cable to control
box. Built-in
cable reliefs allow secure and flexible mounting options.
9.3Hide cables. Rails are designed so cables from
columns and control box can be hidden inside rail.
9.
2Attach control box to table top using 2” screws.
DP
Cable relief
Mains cable
Motor Cable
Motor Cable
10.Installing handset.
11.Flipping Your Desk Over
DO NOT OVER
TIGHTEN SCREWS
WARNING! 2 PERSON LIFT TO AVOID INJURY
AND DAMAGE TO THE PRODUCT
The handset switch sticks out the front edge of the desk,
and can be damaged while flipping the desk over. Do
NOT flip the desk in a way that could damage the handset.
(or remove handset before flipping the desk).
8.
Attach desk feet to legs using (4) M6 bolts.
8.1
Attach glides by screwing into desk feet.
Assembly Process Cont’d