GlobaLux LNS Series User manual
Installa�on Instruc�ons
GlobaLux Ligh�ng LLC – 2037 S. Vineyard Ave. Ontario, CA 91761 – 909-591-7605 Fax: 909-590-3220
RIS9709
1/3
LNS Series
Safety Precau�ons
PLEASE READ THESE INSTRUCTIONS CAREFULLY AND SAVE THEM.AS YOU MAY NEED THEM AT A LATER DATE.
1. Read all safety preauons and installaon instruonsarefully before installing or servig this xture.
Failure tooply with these instruonsould result in potenally
2. It is reoended that a qualied eletrian perforall wiring. This xture ust be wired in aordane
with all naonal and loal elerial odes
3. Do not handle any energized xture or aept to energize any xture with wet hands or while standing
on a wet or dap surfae or in water.
4. Thxture is designed for use in a 120-277VAC, 60Hz fused ruit.
5. To redue the risk of eletr shok, and to assure proper operaon, this xture ust be adequately
grounded. To aoplish proper grounding, there ust be a separate ground wire (green) ontat between
thxture and the ground onneon of your ain power supply panel.
6. Thxture is intended to be used for general INdoor lighng in dry or dap loaons
7. Disclaimer
Changes or odaons not expressly approved by the party responsible for opliane ould void the user’s
NOTE: This equipent has been tested and found to oply with the liits
for a Class B digital devie, pursuant to Part 15 of the FCC Rules and Canadian ICES-005 (B) / NMB-005 (B).
These liits are designed to provide reasonable proteon against harful interferene in a residenal
installaon. This equipent generates uses and an radiate radio frequeny energy and, if not installed and
used in aordane with the instruons, ay ause harful interferene to radio ounaons. However,
there is no guarantee that interferene will not our in a parular installaon. If this equipent does ause
harful interferene to radio or television reepon, whih an be deterined by turning the equipent o
and on, the user is enouraged to try toorre the interferene by one or ore of the following easures:
A
BInrease the separaon between the equipent and reeiver.
C
D
Any odaons to thxture ay void the warranty and interfere with the safe operaon of the luinaire.
Operaon is subjet to the following twoondons: (1) this devie ay not ause interferene, and (2) this
dee ust aept any interferene, luding interferene that ay ause undesired operaon of the devie.
TURN OFF POWER FROM THE MAIN CIRCUIT BEFORE INSTALLING FIXTURE.
Step 1 .
Assembly Instruc�ons
NEEDED TOOLS
Safety Glasses
Ruler/Tape Measure
Drill
3/16” Drill Bit
3/32” Drill Bit
Pliers
Installa�on Instruc�ons
GlobaLux Ligh�ng LLC – 2037 S. Vineyard Ave. Ontario, CA 91761 – 909-591-7605 Fax: 909-590-3220
RIS9709
2/3
LNS Series
Step 2
Step 3
Step 4
Step 5
Step 6
Fig 2
Fig 3
Fig 4
Fig 1
Installa�on Instruc�ons
GlobaLux Ligh�ng LLC – 2037 S. Vineyard Ave. Ontario, CA 91761 – 909-591-7605 Fax: 909-590-3220
RIS9709
3/3
LNS Series
Note
Color Changing Temperature Adjustment, CCT (if desired).
3000K 4000K 5000K 3000K 4000K 5000K 3000K 4000K 5000K
COLOR TEMPERATURE ADJUSTMENT SETTING
IMPORTANT SAFE PRACTICES
Fig 5
LED Array
LED Driver
White
Black
Com
Line
GND
Fixture Body
Black
Red
Grey
Purple
1-10V (-)
1-10V (+)
B.
Step 7 .
Step 8.
Step 9.
Step 10.
Fig 6
Table of contents
