Globe SP10 User manual

S6161-1K-FSE-010
0910-LP-113-0781
INSTRUCTION MANUAL FOR
GLOBE MIXER MODEL SP-25
N00024-11-C-2111
GLOBE FOOD EQUIPMENT COMPANY
2153 DRYDEN RD.
DAYTON, OH 45439
DISTRIBUTION STATEMENT B: DISTRIBUTION AUTHORIZED TO U.S. GOVERNMENT AGENCIES
ONLY. PROPRIETARY INFORMATION: APRIL 2013. OTHER REQUESTS SHALL BE REFERRED TO
COMNAVSEASYSCOM 07L. NO SECONDARY DISTRIBUTION AUTHORIZED WITHOUT WRITTEN
APPROVAL OF THE APPLICABLE COMNAVSEASYSCOM PROGRAM MANAGEMENT OFFICE.
WARNING- THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY
THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751, ET. SEQ.) OR THE EXPORT
ADMINISTRATION ACT OF 1979, AS AMENDED, TITLE 50, U.S.C. APP. 2401 ET. SEQ. VIOLATIONS OF
THESE EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN
ACCORDANCE WITH PROVISIONS OF OPNAVINST 5510.161.
DESTRUCTION NOTICE- DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF
CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.
PUBLISHED BY DIRECTION OF COMMANDER, NAVAL SEA SYSTEMS COMMAND
APRIL 29, 2013

APPROVAL AND PROCUREMENT RECORD
APPROVAL DATA FOR: S6161-1K-FSE-010
TITLE OF MANUAL: Instruction Manual for Globe Mixer Model SP-25
APPROVAL AUTHORITY:
Groton, CT Design Agent, Electric Boat Corporation, dtd April 29, 2013.
CONTRACT
NUMBER SHIP APPLICABILITY QUANTITY OF
MANUALS
QUANTITY
OF
EQUIPMENT
BUILDING
YARD
N00024-11-C-
2111 SSN774 thru SSN783**
SSN784AFS
* 1 EB Corp,
Groton, CT
* Quantities distributed in accordance with applicable Class Index of Technical Publications
(ITP).
** Applicable upon completion of ShipAlt 4681D.
REMARKS: Refer to the Record of Alterations page for specific remarks.
DATE: April 29, 2013
CERTIFICATION: It is hereby certified that S6161-1K-FSE-010 and the changes thereto
have been provided under the contract and approval data shown above.
/s/
J.H. Gagnon, Manager
Technical Services
Electric Boat Corporation
Groton, CT 06340

Record of Alterations
This manual reflects alterations occurring after April 29, 2013 as a result of the following:
CHANGE NO. DEFICIENCY DESCRIPTION


SAFETY-1
Safety Summary
GENERAL
The following general environmental, safety, and occupational health (ESOH) notices
supplement the specific warnings and cautions appearing elsewhere in this manual. They are
recommended precautions that must be understood and applied during operation and
maintenance of the equipment covered herein. Should situations arise that are not covered in the
general or specific safety precautions, the commanding officer or other authority will issue
orders as necessary to cover the situation. All maintenance operations shall comply with
OPNAVINST 5100.19: Navy Safety and Occupational Health (SOH) Program Manual for
Forces Afloat or OPNAVINST 5100.23: Navy Safety and Occupational Health (SOH) Program
Manual, as applicable.
KEEP AWAY FROM LIVE CIRCUITS
Operating personnel must observe safety regulations at all times. Do not replace components or
make adjustments inside equipment with a voltage supply turned on without specific orders from
appropriate authority.
DO NOT SERVICE ALONE
Personnel shall not, under any circumstances, reach inside or enter any enclosure to service or
adjust equipment except in the presence of someone who is capable of rendering aid.
USE CAUTION WHEN SERVICING LIVE EQUIPMENT
In general, use only one hand when servicing live equipment.
If a test meter is to be held or adjusted while voltage is being measured, ground the meter case
before starting measurement, and do not touch the live equipment or the personnel working on
live equipment while holding the meter.
RESUSCITATION
Personnel working with or near electrical equipment should be familiar with modern methods of
resuscitation. An approved poster illustrating the rules for resuscitation by mouth-to-mouth
method shall be prominently displayed. Posters may be obtained on request from the Bureau of
Medicine and Surgery.
HANDLING HEAVY EQUIPMENT
Personnel moving heavy equipment must ensure that proper lifting and handling equipment and
techniques are used.


SAFETY-2
INDUSTRIAL HYGIENE
Personnel must observe industrial hygiene requirements. Review requirements for appropriate
engineering controls and personal protective equipment (PPE) with the ship's safety officer, or
the maintaining activity's Industrial Hygiene department, to determine appropriate personal
protective equipment and waste handling procedures.
CONSUMABLE MATERIALS
Consumable materials (cleaners, etc) are potential submarine atmosphere contaminants and may
be toxic to personnel. Review requirements for appropriate stowage, engineering controls, and
personal protective equipment with Ship Safety Officer or Industrial Hygiene department for all
consumable materials used in performing the stated procedures.
Disposal of all non-metallic waste products (gaskets, etc) must be in accordance with approved
maintenance activity requirements and procedures. At-sea disposal must comply with
OPNAVINST 5090.1: Navy Environmental and Natural Resources Program Manual.


S6161-1K-FSE-010
i
Table of Contents
Part 1
Instruction Manual for Globe Mixers
Models SP10, SP20, SP25, SP30, SP30P,
SP40, SP60, SP62P, AND SP80PL
Part 2
Electrical Diagram
SP25 PLANETARY MIXER 120V Single Phase
Part 3
Parts Catalog
MIXERS
MODEL: SP25 & SPC25
Part 4
Globe Food Equipment Co.
July 2012 U.S.A. Parts Price List

Part 1
Instruction Manual for Globe Mixers
Models SP10, SP20, SP25, SP30, SP30P,
SP40, SP60, SP62P, and SP80PL

Instruction Manual for Globe Mixers
Models SP10, SP20, SP25, SP30, SP30P,
SP40, SP60, SP62P and SP80PL
Model SP20
For Service on Your Mixer:
1. Visitourwebsiteatwww.globeslicers.com
 (selecttheParts/Supportdropdown).
2. OrcalltheGlobeServiceDepartmentat937-299-8625andaskforcontact 
 informationforyourlocalservicecompany.
Model#:
Serial#:
VisitourwebsiteforinformationonadditionalproductsavailablefromGlobe.
www.globeslicers.com
Slicers, Mixers, Countertop Cooking Equipment, Meat Choppers & Scales
Thismanualcontainsimportantsafetyinstructionswhich
mustbestrictlyfollowedwhenusingthisequipment.
- IMPORTANT SAFETY NOTICE -

ATTENTIONOWNERSANDOPERATORS................................................................................................................4
KEYCOMPONENTSOFTHEMIXER........................................................................................................................5
INSTALLATION....................................................................................................................................................... 6-7
OPERATINGINSTRUCTIONS.............................................................................................................................. 7-13
CLEANINGINSTRUCTIONS....................................................................................................................................14
IMPORTANTPOINTS...............................................................................................................................................15
RECOMMENDEDMAINTENANCE..........................................................................................................................15
CAPACITYCHART....................................................................................................................................................16
TROUBLESHOOTING........................................................................................................................................ 17-18
LIMITEDMIXERWARRANTY...................................................................................................................................20
GLOBE FOOD EQUIPMENT COMPANY
2153 DRYDEN RD.
DAYTON, OH 45439
PHONE: [phone]
TOLL FREE: 800-347-5423
FAX: [phone]
E-MAIL: [email protected]
WEBSITE: www.globeslicers.com
© Globe Food Equipment Company, 2011 VR2A_10_2011
SP60P/SP80PL_UPDATES
Printed in the U.S.A. 10-4-2011
Index

Page4
Globe’sequipmentisdesignedtoprovidesafeandproductiveprocessingoffoodproductsaslongasthe
equipmentisusedinaccordancewiththeinstructionsinthismanualandisproperlymaintained.Unlessthe
operatorisadequatelytrainedandsupervisedthereisapossibilityofseriousinjury.Ownersofthisequipment
beartheresponsibilitytomakecertainthatthisequipmentisusedproperlyandsafely,andtostrictlyfollowallof
theinstructionscontainedinthismanualandtherequirementsoflocal,stateorfederallaw.
Ownersshouldnotpermitanyonetotouchthisequipmentunlesstheyare18yearsofageorolder,areadequately
trainedandsupervised,andhavereadandunderstoodthismanual.Ownersshouldalsoensurethatno
customers,visitorsorotherunauthorizedpersonnelcomeincontactwiththisequipment.Pleaserememberthat
Globecannotanticipateeverycircumstanceorenvironmentinwhichitsequipmentwillbeoperated.Itisthe
responsibilityoftheownerandtheoperatortoremainalerttoanyhazardsposedbythefunctionofthisequipment.
Ifyouareeveruncertainaboutaparticulartaskorthepropermethodofoperatingthisequipment,askyour
supervisor.
Thismanualcontainsanumberofprecautionstofollowtohelppromotesafeuseofthisequipment.Throughout
themanualyouwillseeadditionalwarningstohelpalertyoutopotentialhazards.
Warnings affecting your personal safety are indicated by:
Warnings related to possible damage to the equipment are indicated by:
GlobehasputseveralwarninglabelsintheEnglishlanguageonitsmixers.Frenchlabelsarealsoavailable
andcanreplacetheEnglishlabelsattheowner’sdiscretion.Ifthewarninglabelsorthismanualaremisplaced,
damaged,orillegible,orifyourequireadditionalcopies,pleasecontactyournearestrepresentativeorGlobe
directlyfortheseitemsatnocharge.
Pleaserememberthatthismanualand/orthewarninglabelsdonotreplacetheneedtobealert,toproperlytrain
andsuperviseoperators,andtousecommonsensewhenusingthisequipment.
Attention Owners and Operators
or

Page5
Key Components of the Mixer
SP20 FRONT VIEW
SP20 SIDE VIEW
StopButton
StartButton
AttachmentHub
PlanetaryGreaseFitting
PlanetaryShaft
BowlHandle
BowlClamp
SpeedControl
BowlGuard
BuiltinIngredientChute
Bowl
RubberFeet
Timer
AttachmentHub
Thumbscrew
BowlLiftLever
BowlGuardHandle
SplashGuard
BowlCradle
BowlSlides
PowerCord
BowlLiftWheel
(ModelsSP40and
SP60)
GearOilMeter
(ModelsSP62P
andSP80PL)
PowerBowlLift,Mode&
TimerControls
(ModelsSP62Pand
SP80PL)

Page6
Installation
UNPACKING
Unpackthemixerimmediatelyafterreceipt.Ifthemachineisfoundtobedamaged,savethepackagingmaterial
andcontactthecarrierwithinfteen(15)daysofdelivery.Immediatelycontactyoursourceoftheequipment.
You have no recourse for damage after fteen (15) days.
TO AVOID SERIOUS PERSONAL INJURY:
• ALWAYSinstallequipmentinworkareawithadequatelightandspace.
• ONLYoperatethemixeronasolid,LEVEL,non-skidsurfacethatisnonammable.
• NEVERbypass,alter,ormodifythisequipmentinanywayfromitsoriginalcondition.Doingsomaycreate 
 hazardsandwillvoidthewarranty.
• NEVERoperatethemixerwithoutallwarningsattachedtoit.
• DO NOTattempttoliftthemixeralone.
INSTALLATION
1. Readthismanualthoroughlybeforeinstallationandoperation.DONOTproceedwithinstallationand 
 operationifyouhaveanyquestionsordonotunderstandanythinginthismanual.Contactyourlocal 
 representativeorGloberst.
2. Removethecorrugatedboxfromtheskidbyremovingthebandsonthebox.NOTE:TheSP62PandSP80PL
 areshippedinawoodencrate;onlytheboltsatthebottomofthecrate(allfoursides)needtoberemoved.
3. Carefullyunboltthemixerfromtheskidusingan11/16”or3/4”wrench.
4. Selectalocationforthemixerkeepingthesepointsinmind:
 • Floororcountermustbelevel.
 • Easyaccessformaintenanceandservice.
 • Clearanceforoperatingcontrols,installingandremovingagitators,bowl,orattachments.
 • Sufcientspaceforaddingingredientsduringmixingperiods.
 • Ensurerearventilationoutletofmixerisnotblocked.
5. Useatleasttwootherpeopletotilttheunitandinstalltherubberfeet.
6. AboltdowntemplateandboltsareavailablefortheSP10,SP20,orSP25.ContactGlobeifneeded.
7. Inspectthemixertoensureallpartshavebeenprovided(i.e.bowl,beater,whip,anddoughhook).TheSP62P
 onlyhasabowl,doughhook,andbowltruck.
8. Readtheelectricalinformationfoundonthedataplatelocatedattherearofthemachine.Theincoming
 powershouldmatchtheratingonthedataplate.
CONNECTING TO ELECTRICAL POWER
Cord Connected Units: This machine is provided with a three-prong grounding plug. The outlet that
this plug is connected to must be properly grounded. If the receptacle is not the proper grounding type,
contact an electrician. Do not under any circumstances cut or remove the third ground prong from the
power cord or use any adapter plug. Never use an extension cord. Low amp supply could damage the
mixer or cause a re.

Page7
Installation
CONNECTING TO ELECTRICAL POWER cont’d.
If the unit needs to be hard-wired, have a licensed electrician connect the unit to the power supply.
Three Phase Units:
You must conrm proper rotation of all 3 phase mixers prior to using the mixer. There
is a 50% chance your 3 phase mixer is properly rotating if you are using it on 3 phase
power.
1.Makesurethereisnotamixingtoolonthemixershaftandthebowlisempty.
 2.Putthespeedleverononespeedandturntheuniton.
 3.Makesurethelarge,grayplanetarycastingisgoinginthedirectionofthearrowon
 themixerasyoustandinfrontofthemixer(clockwise).(Donotpayattentiontothe
 shaftrotation.)Ifitistravelinginthewrongdirection,havealicensedelectricianswitch
 theelectricalconnectionandretest.
9. CompletethewarrantycardandmailittoGlobeorregisteronlineatwww.globeslicers.com/warranty.asp.
10. Cleanthemixerpriortousingit.Followthecleaninginstructionsstartingonpage14.
NOTE:Itisnormalforthefactorytoapplyagenerousamountofgreaseinandonthemachine.
 Excessgrease(brownincolor)willbeonallmetalsurfaces(e.g.topportionofbowlguard,speedcontrol, 
 bowlclamps,bowlliftlever,andattachmenthubthumbscrew).Excesshigh-pressuredgrease
 (brownish-black)mayalsobefoundontheplanetaryshaftandsomedrippingsmaybefoundinthebowl.
Operating Instructions
TO AVOID SERIOUS PERSONAL INJURY:
• DO NOToperatethemixerbeforereadingtheinstructionmanualrst.
• ALWAYSdisconnectorunplugelectricalpowerbeforecleaning,servicing,or
 adjustinganypartsorattachments.
• ALWAYSkeephands,hair,andclothingawayfrommovingparts.
ABOUT THE REMOVABLE BOWL GUARD (if applicable)
Thebowlguardcanberotatedorremovedtoaccommodatetheoperator’sfunction.Theinterlockingbowlguardis
easytoremoveandreattachforeasycleaninginasinkordishwasher.
 NOTE:Whenguardisopenornotproperlyinstalled,themixerwillnotoperate.
 
 NOTE:Rotatethebowlguardclockwise(open)andcounterclockwise(closed)to
 attachagitatorstothemixer.
Opening / Rotating the Bowl Guard:
Rotatingthebowlguardclockwise(open)andcounterclockwise(closed),allowsthe
operatortoeasilyaddingredientsandproperlyremovetheagitatorandbowlfromthe
mixer.
 1.Whentheseparatedhandlesarelineduptogetherandpushedsecurelytotheright
 ofthemixer,thebowlguardisinthelockedpositionandreadytooperate(g.7-1)
g.7-1

Page8
Operating Instructions
 2.Torotatethebowlguardtoitsopenposition,grasptheseparatedhandlesonthebowlguardandmovethem,
 togetherasone,clockwisetoopen/rotatethebowlguard.Toclosethebowlguard,grasptheseparated
 handlesandmovethemtogetherasone,counterclockwisetoclose/rotatethebowlguardbackintoalocked
 position.
Removing and Attaching the Bowl Guard:
NOTE:Beforeremovingorattachingthebowlguard,makesurethebowlisinthedown/
loweredpositionandtheagitatortoolisofftheshaft.

 1.Toremovethebowlguardforcleaning,pushthelowerpartoftheseparatedhandle
 out(clockwise)dividingthehandleandreleasingtheguardfromtherotationring.
 (seeg.8-1)
 2.Onceseparated,takeholdofthelowerseparatedhandleandcontinueturningthe
 guardclockwiseuntilthebowlguardreleasesfromtheringcatchonthemixer.
 (seeg.8-2)
 3.Toreattachthebowlguard,lineuptheringcatchontheleftofthemixer;lift
 guardgentlyintoplaceandrotatetheguard’slowerhandlecounterclockwise
 untilitsnapsbackintoplacewiththeupperpartofthehandle.
ATTACHING THE BOWL TO THE MIXER
NOTE:InstallthebowlBEFOREattachingtheagitator.
1. Lowerthebowlbypullingthebowlliftleverforwardanddowntoitsresting
 position.FormodelsSP40andSP60rotatethebowlliftwheel
 counterclockwiseuntilitstops.FortheSP62PandSP80PLpressthedown
 arrow(bluebutton)tolowerthebowluntilitstops.
2. Liftthebowlbythebowlhandlesand:
 a. slowlypositionthelockingpin(locatedontherearofthebowl)intotheholeinthe
  middlerearofthecradle(seeg8-3).
 b. lowerthebowlontothepinslocatedoneithersideofthebowlcradle.
3. Oncethebowlispositionedonthecradle,securethebowlbypullingeachbowlclamp
 forwarduntilthebowlislockedtight(seeg8-4).
g.8-1
g.8-2
g.8-3 g.8-4

Page9
Operating Instructions
ATTACHING THE AGITATOR TO THE MIXER (i.e., Beater, Hook, Whip)
NOTE:Itiseasiertoinstalltheagitatorpriortoaddingtheingredientsintothebowl.
1. Rotatethebowlguardtotheleftsoitrestsintheopenposition(seeg9-1).
Excessiveforceusedtoopenandclosethebowlguardmaydamagethe
springlockandbowlguardmicroswitch,andwillvoidthewarranty.
2. Slidetheagitatorslowlyupwardsontotheplanetaryshaft,ttingtheshaftpinthroughthe
 slotintheagitator(seeg9-2).
3. Rotatetheagitatorclockwisetosecureitontotheplanetaryshaft.
MIXING INGREDIENTS
Followthecapacitychartlocatedonpage16inthismanual.
Overloadingornotfollowingthischartwilldamagethemixerandvoid
thewarranty.
Agitatorsshouldalwaysrotateinaclockwisedirectionaroundthebowl.
Iftheagitatormovescounterclockwise,contactalicensedelectrician
immediatelytoremedyincorrectwiring.
IMPORTANT: Make sure the speed control lever is on the rst (1) speed.
1. Addtheappropriatemixingingredientsintothebowl.
2. Rotatethebowlliftleverupuntilthebowllocksintoposition.OntheSP40andSP60
 rotatethebowlliftwheelclockwiseuntilthebowlisallthewayupintoposition.Forthe
 SP62PandSP80PLpresstheuparrow(bluebutton)untilthebowlisupintoposition.
3. Rotatethebowlguardtotherightsoitlocksintotheclosedposition(seeg9-3).
 Aclickingsoundwillbeheard.
NOTE: Themixerwillnotstartifthebowlguardisopenorthebowlisintheloweredposition.
SP62P and SP80PL mixer ownerers only: read through this section and continue to page 12 for further
operating instructions for use of the digital controls.
4. Setthetimerfortheappropriatemixingtimeorsetthemixerfornon-timedoperation.
 a. Timed Operation: Turnthetimerknobinaclockwisedirectionatleastveminutespast“0”tothedesired
  time.NOTE:Tosetthetimeforlessthanveminutes,turnthetimerknobclockwisetosixthen  
  counterclockwisebacktothedesiredtime.
 b. Non-Timed Operation:Turnthetimerknobinacounterclockwisedirectiontothegreen“on”position. 
  NOTE:Heavyloadsshouldnotbemixedlongerthanfteen(15)minutesatthissettingwithoutanequal
  amountofresttimeforthemixer.Failuretoadheretotheseinstructionsmaycausethemixerto
  automaticallyshutoffduetooverloading.
g.9-2
g.9-1
g.9-3

Page10
Operating Instructions
5. Selecttheappropriatespeedsettingbyliftingorloweringthespeedcontrollever.Threexedspeedsare 
 availableforuse:rst(1),second(2),andthird(3).NOTE:TheSP62PhastwospeedsandtheSP80PLhas
 fourxedspeeds.
 GearSpeed ProductType/Ingredient
 1(low)  Heavy:mixingpizza,bread,pastaanddonutdoughs,wafe/cakebatter,mashingpotatoes
 2(medium) Medium:2ndstageofmixingfordonutdough,etc.
 3(high)  Light:whippingcream,eggwhites,meringue

IMPORTANT: When mixing product always follow the recommended agitator and speed setting
according to the capacity chart located on page 16 of this manual.
6. Pressthegreenstartbuttonlocatedonthemiddleofthecontrolpanel.
Always STOP the mixer BEFORE changing speeds! Failure to do so may damage the
gears or other parts and WILL void the warranty!
7. Tochangethespeedwhilemixing:
 a. presstheredstopbutton
 b. changethespeedbyraisingorloweringthespeedcontrollever
 c. pressthegreenstartbuttontorestartthemixer
NOTE: TheSP62PandSP80PLwillautomaticallyshutoffifthespeedischangedwhilethemixerisinoperation.
NOTE: Themixerisequippedwithamotoroverloadprotection.Ifthemixershutsoffduringoperation,reducethe
   batchsizeand:
  a. SP25andsmallermodels:Pressthestopbuttonthenpresstheoverloadresetbutton.
  b. Largermodels:Waittwominutes.Pressthestopbutton,thenpressthestartbutton.
NOTE: 2ndspeedshouldneverbeusedon50%ARorlowerwiththeexceptionoftheSP60.TheSP60
  requiresa50%reductioninbatchsizetomixinspeed2with50%ARdoughs.
NOTE: Reducebatchsizeby10%ifchilledour,waterbelow70°F,ice,orhighglutenourisused.
IMPORTANT: Forheavierloads,themixershouldnotrunlongerthanfteenminuteswithoutpausingforacool
downperiodofatleastfteenminutesormorebeforeresumingmixing.Forlighterloads,themixershouldnotrun
longerthanthirtyminuteswithoutpausingforacooldownperiodofatleastthirtyminutesormorebeforeresuming
mixing.
8. Whentheingredientshavebeenthoroughlymixed,presstheredstopbuttontostopthemixer.
 NOTE:Ifthetimerwasused,themixerwillautomaticallystopwhenthetimehasexpired.
9. Lowerthebowlbypullingthebowlliftleverforwardanddowntoitsrestingposition.FormodelsSP40and 
 SP60,rotatethebowlliftwheelcounterclockwiseuntilitstops.FormodelsSP62PandSP80PL,pressthe
 downarrow(bluebutton)untilthebowlstops.
10. Rotatethebowlguardtotheleftsoitisintheopenposition.
11. Removetheagitatorfromtheplanetaryshaftbyliftingitupwards,thenrotatingitcounterclockwiseuntilitis 
 unlocked.Lowertheagitatorandremovefromplanetaryshaft.

Page11
Operating Instructions
12. Pusheachbowlclampbackwardstounlockthebowlfromthebowlcradle.
13. Liftupslightlyonthebowlsoitclearsthepinsonthebowlcradle.
Most batches are heavy. Always use two people to remove and transport the loaded
bowl after mixing is complete. A bowl truck is included with the SP60, SP62P and
SP80PL models and should be used to unload bowls containing more than 50 lbs.
per batch.
HOW TO USE THE ATTACHMENT HUB
Never put your hand into the feed chute when using any mixer attachment.
ThemixermustbeOFFbeforeinstallingattachments!DoNOTuseattachmentswhilemixing!
1. Loosenandremovetheattachmenthubthumbscrew(seeg11-1).
2. Removetheplasticcoverfromtheattachmenthub(seeg11-1).
3. Lubricatetheattachmentshaftwithafoodqualitygreaseormineraloil.
4. Inserttheattachmentshaftintothehubmakingsuretolineupthealignmentpinwith
 thehubhole.
5. Tightenthethumbscrewbackintothehubandsecurelytightenit.
6. Selecttheappropriatespeedsettingbyliftingorloweringthespeedcontrollever.
Recommended Speed while using attachments:
 Attachment  RecommendedSpeed
 VegetableSlicer   1or2
 CheeseShredder/Grater  2or3
 MeatGrinder   1only
 NOTE: Makesurethebowlisupandthebowlguardisclosed.Themixerwillnotstartifthebowlandthe 
  bowlguardarenotintheproperoperatingposition.
7. Turnthetimerknobinacounterclockwisedirectiontothegreen“on”position.
8. Pressthegreenstartbuttonlocatedonthemiddleofthecontrolpanel.
Always STOP the mixer BEFORE changing speeds! Failure to do so may damage the
gears or other parts and WILL void the warranty!
9. Tochangethespeedwhileusingmixerattachments:
 a. presstheredstopbutton
 b. changethespeedbyraisingorloweringthespeedcontrollever
 c. pressthegreenstartbuttontorestartthemixer

NOTE: TheSP62PandSP80PLwillautomaticallyshutoffifthespeedsarechangedwhilethemixerisin
  operation.
PlasticCover
Thumbscrew
g.11-1

Page12
Operating Instructions
SP62P AND SP80PL DIGITAL CONTROL INSTRUCTIONS
Non-Timed / Manual Mode instructions and controls for the
SP62P and SP80PL
ThemixermustbeOFFbeforeinstallingattachments!DoNOT
useattachmentswhilemixing!
NOTE:Makesurethebowlisupandthebowlguardisclosed.
Themixerwillnotstartifthebowlandthebowlguardarenotin
theproperoperatingposition.

PresstheBOWL“Up”arrowtoactivatethepowerbowllift.
Setthespeedcontroltothedesiredspeed.

NON-TIMED - MANUAL MODE
1. TobeginoperationofthemixerinManualmode,press
 the“MAN”button.Thedisplaywillilluminateasmall
 dotoflightinthelowerright-handcorneroftheseconds
 timerdisplay.

 NOTE:Mixerwillnotstartifbowlisnotallthewayup.
 Additionally,thebowlguardmustbecompletelyclosed.
2. Pressthe“Start”buttontobeginmixing.Press“Stop”to
 discontinuemixing.
Always STOP the mixer BEFORE changing speeds!
 NOTE:TheSP62PandSP80PLwillautomaticallyshutoffif
 thespeedsarechangedwhilethemixerisinoperation.

 NOTE:ThetimerdoesnotworkinManualMode.
 Tousethetimerfeature,followtheTimerModeinstructions.
TIMER MODE
1. TobeginoperatingthemixerinTIMERmode,press
 theManual(MAN)button.

 Ifstartingmixerforthersttime,orifpowerislost,the
 TIMERdisplaywillonlyilluminateinallzeros“0”;otherwise,
 itwilldisplaythelastmixingtimethatwasentered.
2. Selectthenumberofminutesandsecondsbyusingtheup
 anddownarrowslocatedunderthetimerdigitaldisplay.
 Therstsetofup-downarrowbuttonscontrolstheminutes
 andthesecondsetofup/downarrowbuttonscontrolsthe
 seconds.
 Pressandcontinuouslyholdtheuparrowbuttonstothe
 desiredminutesandseconds.Pressandcontinuouslyhold
 ofthebuttonscrollsthroughthenumbercyclesquickly.(To
 slowdowntheselectionandtobettercontrolthesetting
 time,presstheupordownarrowbutton(Do
 notcontinuouslyholdthebuttondown).
11
2
2
12

Page13
Operating Instructions
3. Oncethedesiredmixtimehasbeensetonthetimer,pressthe“Start”buttontobeginmixing.
Always STOP the mixer BEFORE changing speeds!
NOTE:TheSP62PandSP80PLwillautomaticallyshutoffifthespeedsarechangedwhilethemixerisinoperation.
4. Oncethe“Start”buttonhasbeenpressed,themixertimernumberswillbegintodescend.
Thetimerandmixercanbeinterruptedatanytimebypressingthe“Stop”button.Ifthetimercycleisinterruptedand
themixerhasnotyetnisheditssetmixingtime,themixingcyclecanbecontinuedfromwhereitleftoffbypressing
the“Start”button.
NOTE:Ifacycleisinterruptedbythebowlguardbeingopenedorthespeedofthemixerbeingchanged,themixer
willstop.Assoonasthefaultiscorrected,the“Start”buttoncanbepressedtocontinuetheprogrammedtime.
Toaddadditionalminutesorsecondstoamixtime,“Stop”themixer,press“TIMER”andadjustthecyclemixingtime.
Pressthe“Start”buttontobeginmixingonceagain.
5. Attheendofatimedmixingcyclethetimerwillcountdownto“00”minutesand“00”seconds,themixerwillstop,
 andthetimerwillreturntodisplayingthelastmixcycletimethatwasentered.
6. Tobeginanothermixcyclewiththesamesettimeasthepreviousmix,pressthe“Start”button.
 Ifthemixcycletimeneedstobeadjustedupordown,setthenewdesiredtimeandthenpressthe“Start”button
 tobeginmixing.
Themixertimerwillalwaysresetbacktothelastmixtimethatwassetunlesstheplugorpowerisdisconnectedtothe
mixer.Ifpowerislosttothemixer,themixingtimewillneedtoberesettothedesiredtime.
3