GME SPK005 User manual

When mounting the SPK005 and SPK006 Marine Speakers to the mounting bracket supplied;
the silicon washer is to be placed between the mounting bracket and outer case of the
speaker. By fitting the washer in this position, it will ensure the waterproof characteristics
of these products.
IMPORTANT NOTE
SPK005 & SPK006
Marine Stereo Box Speakers
MOUNTING INSTRUCTIONS
Silicon Washers

A Division of
Head Office: SYDNEY- Locked Bag 2086, North Ryde, N.S.W. 1670, Australia. Tel: [phone] Fax : [phone]
MELBOURNE ADELAIDE PERTH BRISBANE SYDNEY AUCKLAND
7 Micro Circuit 14 Phillips Street Unit 1 Unit 1 Unit B Unit 2
DANDENONG STH 3175 THEBARTON 5031 10-12 Harvard Way 89-101 Factory Road 22-24 College Street 24 Bishop Dunn Pl.
Tel: [phone] Tel: [phone] CANNING VALE 6155 OXLEY 4075 GLADESVILLE 2111 East Tamaki
Fax: [phone] Fax: [phone] Tel: [phone] Tel: [phone] Tel: [phone] Manukau, 2013 NZ
Fax: [phone] Fax: [phone] Fax: [phone] Tel: [phone]
Fax: [phone]
For customers outside Australia and New Zealand please contact your local GME Distributor or email: [e-mail]
Part Number: 310435 Drawing Number: 44308-1
Website: www.gme.net.au
A Division of
WARRANTY
GME limit this warranty to the original purchaser of
the equipment.
GME warrant this product to be free from defects in
material and workmanship for a period of thirty six
(36) months from the date of purchase from their
authorised retailer.
Should the product require servicing during this
period, all labour and parts used to effect repairs will
be supplied free of charge. GME reserve the right to
determine whether damage has been occasioned by
accident, misuse or improper installation whereby
the warranty would be void, including equipment
which has been damaged due to:
(a) Reverse polarity connection to a battery
or power supply.
(b) Connection to an incorrect supply voltage.
(c) Non factory modification or repairs.
(d) Use of incorrect or replacement fuse.
(e) Lightening strike or static discharge.
Procedure to be followed by claimant: In the event
of a defect occurring during the warranty period,
the original purchaser may return the defective
unit along with suitable proof of purchase date
(i.e. receipt, docket, credit card slip etc.) and a full
description of the defect to the retailer from whom
the unit was purchased. All freight charges incurred
for transportation by the retailer or GME are the
purchaser’s responsibility.
GME AFTER SALES SERVICE
Your GME product is especially designed for the
environment encountered in domestic or marine
installations. The use of all solid state circuitry, careful
design and rigorous testing, result in high reliability.
Should failure occur however, GME maintain a fully
equipped service facility and spare parts stock to
meet the customer’s requirements long after expiry
of the warranty period.