Gold's Gym GGMC03220 User manual

Æ
®
USER'S MANUAL
QUESTIONS?
We are committed to providing
comp ete customer satisfaction.
If you have questions, or if there
are missing or damaged parts,
we wi guarantee comp ete sat-
isfaction through direct assis-
tance from our factory.
TO AVOID DELAYS, PLEASE
CALL DIRECT TO OUR TOLL-
FREE CUSTOMER HOT LINE.
The trained technicians on our
customer hot ine wi provide
immediate assistance, free of
charge to you.
CUSTOMER HOT LINE:
1-800-999-3756
Mon.–Fri., 6 a.m.–6 p.m. MST
Mode No. GGMC03220
CAUTION
Read a precautions and instruc-
tions in this manua before using
this equipment. Save this manua
for future reference. GOLD'S GYM is a registered trademark of Gold's Gym
International, Inc. This prod ct is man fact red and distrib ted
nder license from Gold's Gym International, Inc.

The Short Nylon Rope (6) has three ends connected in
the middle with a bracket. Note that two ends of the
Rope go out of one side of the bracket, and the
sing e end goes out the other side of the bracket.
Ro te the single end of the Rope nder the “V”-P lley
(15). Attach the P lley to the front leg (A) with the M10
x 107mm Bolt (16) and the M10 Nylon Lockn t (11).
Press two 2” Ro nd Inner Caps (8) into the Leg
Developer (1). Press two 45mm Ro nd Inner Caps (7)
into the Leg Lever (2).
Attach the Eyebolt (10) to the indicated side of the Leg
Lever (2) with an M8 Zinc Nylon Lockn t (14).
L bricate an M10 x 69mm Bolt (13). Attach the Leg
Lever (2) to the Leg Developer (1) with the Bolt and an
M10 Nylon Lockn t (11).
Press fo r 19mm Ro nd Inner Caps (9) into the t bes
on the Leg Developer (1) and the Leg Lever (2). Slide
fo r Foam Pads (4) onto the t bes.
Replace the old bench leg b shing (not shown) in the
bench frame (B) with the new Bench Leg B shing (12).
Make sure the inside of the Bushing is a igned with
the front eg (A). Slide the Leg Developer (1) into the
bench frame and align the indicated hole with a hole in
the front leg. Tighten the Bench Knob (5) into the Leg
Developer.
ASSEMBLY
L bricate
2 1
Hole
8
9
9
9
4
T be
T be
4
4
4 11
13
9
7
7 10
12
14
5
15
11
6
16
AB
8
1. Read a instructions in this manua and in
the iterature accompanying the weight sys-
tem before using the weight system accesso-
ry. Use the accessory on y as described in
the iterature.
2. Keep hands and feet away from moving
parts.
3. Make sure that the ny on rope remains on the
pu ey at a times. If the ny on rope binds
whi e you are exercising, stop and make sure
that the ny on rope is on the pu ey.
4. If you fee pain or dizziness at any time whi e
exercising, stop immediate y and begin coo -
ing down.
WARNING: Before beginning this or any exercise program, consu t your physician. This is
especia y important for persons over the age of 35 or persons with pre-existing hea th prob ems. Read
a instructions before using. ICON assumes no responsibi ity for persona injury or property damage
sustained by or through the use of this product.
WARNING: To reduce the risk of serious injury, read the fo owing important precautions
before using the weight system accessory.
IMPORTANT PRECAUTIONS
Thank yo for selecting the versatile GOLD’S GYM®LEG DEVELOPER weight system accessory. For your
benefit, read this manua carefu y before using the weight system accessory.

DC
ATTACHING THE SHORT NYLON ROPE
To se the Leg Lever (2), attach the single end of the
Short Nylon Rope (6) to the Eyebolt (10) on the Leg
Lever with a Cable Clip (3), as shown in the inset
drawing.
Attach the shorter of the other two ends of the Short
Nylon Rope (6) to the indicated end of the long nylon
rope (C) with a cable clip (D). Attach the final end of
the Short Nylon Rope to the other end of the long
nylon rope in the same manner (not shown).
2
10
36
6
8
1
2
11
7
4
9
9
9
9
4
4
4
13
10
7
14
3
612
5
8
6
16
15
11
PART LIST/EXPLODED DRAWING—Mode No. GGMC03220 R0902A
1 1 Leg Developer
2 1 Leg Lever
3 1 Cable Clip
4 4 Foam Pad
5 1 Bench Knob
6 1 Short Nylon Rope
7 2 45mm Ro nd Inner Cap
8 2 2” Ro nd Inner Cap
9 4 19mm Ro nd Inner Cap
10 1 Eyebolt
11 2 M10 Nylon Lockn t
12 1 Bench Leg B shing
13 1 M10 x 69mm Bolt
14 1
M8 Zinc Nylon Lockn t
15 1 “V”-P lley
16 1 M10 x 107mm Bolt
# 1 User’s Man al
Key No. Qty. Description
Note: “#” indicates a non-ill strated part. Specifications are s bject to change witho t notice.
ADJUSTMENTS
A
5
1
B
ADJUSTING THE LEG DEVELOPER
To adj st the height of the Leg Developer (1),
nscrew the Bench Knob (5) from the front leg (A).
Align the hole in the Leg Developer with one of the
three holes in the front leg. Retighten the Knob into
the front leg and Leg Developer.
To remove the Leg Developer (1), nscrew the Bench
Knob (5) from the front leg (A) and lift the Leg
Developer o t of the Bench Frame (B). Make sure
the short ny on rope is not attached to the eyebo t
in the eg ever

ORDERING REPLACEMENT PARTS
To order replacement parts, simply call o r C stomer Service Department toll-free at 1-800-999-3756, Monday
thro gh Friday, 6 a.m. ntil 6 p.m. Mo ntain Time (excl ding holidays). To help s assist yo , please be pre-
pared to give the following information:
1. The MODEL NUMBER of the prod ct (GGMC03220)
2. The NAME of the prod ct (GOLD’S GYM®LEG DEVELOPER weight system accessory)
3. The SERIAL NUMBER of the prod ct (see the front cover of this man al)
4. The KEY NUMBER and DESCRIPTION of the part(s) (refer to the PART LIST)
Part No. 190353 R0902A Printed in China © 2002 ICON Health & Fitness, Inc.
LIMITED WARRANTY
WHAT IS COVERED—The entire GOLD’S GYM®LEG DEVELOPER weight system (“Prod ct”) is warranted to be free of all defects
in material and workmanship.
WHO IS COVERED—The original p rchaser or any person receiving the Prod ct as a gift from the original p rchaser.
HOW LONG IS IT COVERED—ICON Health & Fitness, Inc. (“ICON”), warrants the prod ct frame for the lifetime of the original
owner. ICON warrants all other parts for one year after the date of p rchase. Labor is covered for ninety days.
WHAT WE DO TO CORRECT COVERED DEFECTS—We will ship to yo , witho t charge, any replacement part or component, pro-
viding the repairs are a thorized by ICON first and are performed by an ICON trained and a thorized service provider, or, at o r
option, we will replace the Prod ct.
WHAT IS NOT COVERED—Any fail res or damage ca sed by na thorized service, mis se, accident, negligence, improper
assembly or installation, alterations, modifications witho t o r written a thorization or by fail re on yo r part to se, operate, and
maintain as set o t in yo r User’s Man al (“Man al”).
WHAT YOU MUST DO—Always retain proof of p rchase, s ch as yo r bill of sale; store, operate, and maintain the Prod ct as spec-
ified in the Man al; notify o r C stomer Service Department of any defect within 10 days after discovery of the defect; as instr ct-
ed, ret rn any defected part for replacement or, if necessary, the entire prod ct, for repair.
USER’S MANUAL—It is VERY IMPORTANT THAT YOU READ THE MANUAL before operating the Prod ct. Remember to do the
periodic maintenance req irements specified in the Man al to ass re proper operation and yo r contin ed satisfaction.
HOW TO GET PARTS AND SERVICE—Simply call o r C stomer Service Department at 1-800-999-3756 and tell them yo r name
and address and the serial n mber of yo r Prod ct. They will tell yo how to get a part replaced, or if necessary, arrange for ser-
vice where yo r Prod ct is located or advise yo how to ship the Prod ct for service. Before shipping, always obtain a Ret rn
A thorization N mber (RA No.) from o r C stomer Service Department; sec rely pack yo r Prod ct (save the original shipping car-
ton if possible); p t the RA No. on the o tside of the carton and ins re the prod ct. Incl de a letter explaining the prod ct or prob-
lem and a copy of yo r proof of p rchase if yo believe the service is covered by warranty.
ICON is not responsible or liable for indirect, special or conseq ential damages arising o t of or in connection with the se or per-
formance of the prod ct or damages with respect to any economic loss, loss of property, loss of reven es or profits, loss of enjoy-
ment or se, costs of removal, installation or other conseq ential damages of whatsoever nat re. Some states do not allow the
excl sion or limitation of incidental or conseq ential damages. Accordingly, the above limitation may not apply to yo .
The warranty extended here nder is in lie of any and all other warranties and any implied warranties of merchantability or fitness
for a partic lar p rpose is limited in its scope and d ration to the terms set forth herein. Some states do not allow limitations on how
long an implied warranty lasts. Accordingly, the above limitation may not apply to yo .
No one is a thorized to change, modify or extend the terms of this limited warranty. This warranty gives yo specific legal rights and
yo may have other rights which vary from state to state.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813