Goldair GCBF100 User manual

Operating Instructions
30CMBoxFan
Item: GCBF100

General care and safety guide
Thank you for choosing this GOLDAIR Fan. This GOLDAIR appliance has
been designed and manufactured to high standards of engineering and
with proper use and care, as described in this leaflet, will give you years of
useful service. Please read these instructions carefully and keep them for
future reference.
ALWAYS
Use only the voltage specified on the rating
plate of the appliance.
Keep all objects at least 1 Metre from the
front, sides and rear of the appliance
This appliance is intended for household
use only and not for commercial or industrial
use.
Use this appliance only as described in this
manual. Any other use is not recommended by
the manufacturer and may cause fire, electric
shock or injury.
The common cause of overheating is
deposits of dust or fluff in the appliance. Ensure
these deposits are removed regularly by
unplugging the appliance and vacuum cleaning
the air vents and grills.
Always unplug appliance when not in use.
When the appliance has been unpacked,
check if for transport damage and ensure all
parts have been delivered. If parts are missing
of the appliance has been damaged, contact the
Goldair Customer Services Team.
If your appliance does not work, or is not
working properly, contact the place of purchase.
Repair work on the appliance by unqualified
persons can cause serious risk to the user.
Ensure hands are dry before handling the
plug or the Fan.
Carry out regular checks of the supply cord
to ensure no damage is evident.
ALWAYS
Children should be supervised to ensure
that they do not play with the appliance.
Ensure that the cord is fully extended (not
coiled) while in use.
Avoid contact with the moving parts. Keep
hands, hair, clothing, away from blade of the
Fan during operation to reduce the risk of injury
to person and/or damage to the Fan.
Switch off and use handles provided when
moving.
NEVER
˟Never Place appliance close to radiant heat
source.
˟Never Operate in areas where petrol, paint
or other flammable liquids are used or stored.
˟Never Use the appliance to dry clothes.
˟Never Insert or allow foreign objects to enter
any ventilation or exhaust opening, as this may
cause an electric shock, fire or damage to the
appliance.
˟Never use abrasive cleaning products on
this appliance. Clean with a damp cloth (not
wet) rinsed in hot soapy water only. Always
remove plug from the mains supply before
cleaning.
˟Never connect the appliance to mains
supply until completely assembled and
adjusted.
˟Never Remove plug from power socket until
the appliance has been switched off.
˟Never Remove plug from power socket by
pulling cord –always grip plug.
˟Never Twist, kink or wrap the cord around
the appliance, as this may cause the insulation
to weaken and split. Always ensure that all cord
has been removed from any cord storage area
and is unrolled before use.
Continued Over Leaf

Cleaning
To avoid risk of electric shock, before
cleaning, you MUST ALWAYS switch off
and unplug the Fan before cleaning.
Use only a soft, damp cloth to gently wipe
the Fan and dry well.
DO NOT immerse the Fan in water and
never allow water to enter the motor
housing.
DO NOT use harsh chemicals to clean the
Fan.
TECHNICAL SPECIFICATION
Model No: GCBF100
Power Supply: 220V-240V / 50Hz
Power: 35W
SUPPORT AND TECHNICAL ADVICE
PO Box 100707, NSMC, Auckland, New Zealand
Monday –Friday 8am-5pm
Phone: [phone]
Website: www.goldair.co.nz
General care and safety guide
NEVER
˟Never use this appliance in the immediate
surrounds of a bath, a shower, or a swimming
pool or other liquids. The appliance must not be
immersed in any liquids.
˟Due to the risk of injury, never use this
appliance for any purpose other than its
intended use. This appliance is intended for use
in household and similar applications such as
staff kitchen areas in shops, offices and other
working environments; farm houses, by clients
in hotels, motels and other residential type
environments, bed and breakfast type
environments
˟Never use this appliance outdoors.
˟The use of an extension cord, power board,
or external timer is not recommended with this
unit.
˟Never operate the appliance with a
damaged cord or plug, after it malfunctions, or if
it has been damaged in any manner. Have the
appliance checked and repaired by a qualified
electrician if repair is necessary. If the supply
cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
˟This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities or lack
of experience and knowledge, unless they are
supervised or have been given instruction
concerning the use of the Fan by a person
responsible for their safety.
˟Never touch blades while the machine is
plugged in.

Fan control switch
The control switch positions are:
•0 = OFF
•1 = Low Speed
•2 = Medium Speed
•3 = High Speed
Place the Fan on a dry, level and sturdy surface.
Plug the power cord into the socket, making sure the speed control is at OFF position.
To choose the desired speed, turn the Speed Control Dial
TIMER: Set the Timer switch to the desired time (up to 120mins) for when you want the fan to turn
off. For normal fan use, the Timer control must be set to ON
LOUVRE: This switch starts/stops Grill rotation
Operating your Fan

One year Warranty
Your Goldair product has been inspected and
tested and is guaranteed subject to the
following for a period to One year from the
date of purchase against defects in
workmanship and materials. During this
period, such defects will be rectified by repair
or replacement of the product purchased.
Your product contains no user serviceable
components and this Warranty becomes
invalid if in our opinion the product has been
misused, abused, incorrectly installed,
tampered with, connected to an electrical
supply not corresponding with the name plate
specification, or subjected to power surges.
The Warranty does not include any labour or
other associated expense that may be
involved in removal or installation of the
product. Normal wear and tear is expressly
excluded.
If your Goldair product fails to operate
satisfactorily, please return it to the retailer
from whom it was purchased. To obtain a
repair or replacement product under this
Warranty, you will need to produce
satisfactory evidence of date of purchase. The
completed Warranty and purchase receipt
must be presented with the product. The
Warranty should be filled out at the time of
purchase. It is in your interest to make sure
this is done.
If the product is to be replaced (cannot be
repaired) then that replacement will be of the
same or similar product or accessory
excluding packaging, instruction card etc.
Where a replacement product is supplied, this
shall be guaranteed for the balance of the
original Warranty period.
Any model that is no longer available will be
replaced by a model of a value and with such
features as we consider appropriate in the
circumstances. Goldair Ltd is not responsible
for freight forwarding charges, losses or
damage in transit.
If service is required after the Warranty period
has expired, the product should be returned to
a qualified electrical technician. Service
outside of the Warranty period will be at your
cost.
Consumers Guarantee Act (1993).
In accordance with the above act consumers
are advised that: The manufacturer does not
undertake that repair facilities and parts are
necessarily available for this product.
If any of the provisions of the foregoing are
contrary to any relevant legislation, then that
provision shall be deemed to be excluded from
the Warranty and the rest of the provisions will
continue to apply.
Name ………………………………………………
Address ……………………………………………
……………………………………………………….
Suburb ……………………………………………
Purchased from …………………………………
Date of purchase …………………………………
Name of product …………………………………
Model no ……………………………………………
IMPORTANT: Please retain this Warranty card