Goldair GCDF185 User manual

Operating Instructions
30cmSatinChromeDeskFan
Item: GCDF185

General Care and Safety Guide
Thank you for choosing this Goldair product. This Goldair appliance has been
designed and manufactured to high standards of engineering and with proper
use and care, as described in this leaflet, will give you years of useful service.
Please read these instructions carefully and keep them for future reference.
1. This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
2. Children should be supervised to ensure that they do not play with the
appliance.
3. If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
4. Use only the voltage specified on the rating plate of the appliance.
5. Keep all objects at least 1 Metre from the front, sides and rear of the
appliance
6. This appliance is intended for household use only and not for commercial or
industrial use.
7. Use this appliance only as described in this manual. Any other use is not
recommended by the manufacturer and may cause fire, electric shock or
injury.
8. The common cause of overheating is deposits of dust or fluff in the
appliance. Ensure these deposits are removed regularly by unplugging the
appliance and vacuum cleaning the air vents and grills.
9. Always unplug appliance when not in use.
10. When the appliance has been unpacked, check it for transport damage and
ensure all parts have been delivered. If parts are missing or the appliance
has been damaged, contact the Goldair Customer Services Team.
11. If your appliance does not work, or is not working properly, contact the place
of purchase. Repair work on the appliance by unqualified persons can
cause serious risk to the user.
12. Ensure hands are dry before handling the plug or the main unit.
13. Carry out regular checks of the supply cord to ensure no damage is evident.
14. Ensure that the cord is fully extended (not coiled) while in use.
15. Avoid contact with the moving parts. Keep hands, hair, clothing, away from
blade of the fan during operation to reduce the risk of injury to person and/or
damage to the unit.
16. Switch off and use handles provided when moving.
17. It is recommended that this fan is plugged directly into the wall socket.
18. A correctly specified, undamaged extension cord may be used with this fan
provided it is used in a safe manner.

TECHNICAL SPECIFICATION
Model: GCDF185
Supply: 220 -240VAC 50Hz
Wattage: 35W
General Care and Safety Guide
19. Never place appliance close to radiant heat source.
20. Never operate in areas where petrol, paint or other flammable liquids are
used or stored.
21. Never use the appliance to dry clothes.
22. Never insert or allow foreign objects to enter any ventilation or exhaust
opening, as this may cause an electric shock, fire or damage to the
appliance.
23. Never use abrasive cleaning products on this appliance. Clean with a damp
cloth (not wet) rinsed in hot soapy water only. Always remove plug from the
mains supply before cleaning.
24. Never connect the appliance to mains supply until completely assembled
and adjusted.
25. Never remove plug from power socket until the appliance has been switched
off.
26. Never remove plug from power socket by pulling cord –always grip plug.
27. Never twist, kink or wrap the cord around the appliance, as this may cause
the insulation to weaken and split. Always ensure that all cord has been
removed from any cord storage area and is unrolled before use.
28. Never use this appliance in the immediate surrounds of a bath, a shower, or
a swimming pool or other liquids. The appliance must not be immersed in
any liquids.
29. Due to the risk of injury, never use this appliance for any purpose other than
its intended use. This appliance is intended for use in household and similar
applications such as staff kitchen areas in shops, offices and other working
environments; farm houses, by clients in hotels, motels, bed and breakfast
type environments and other residential type environments
30. Never use this appliance outdoors.
31. Never operate the appliance with a damaged cord or plug, after it
malfunctions, or if it has been damaged in any manner. Have the appliance
checked and repaired by a qualified electrician if repair is necessary.
32. Never place the unit in wardrobes or other enclosed spaces as this may
cause fire hazards.

The fan head and the pipe are assembled.
Unscrew the fastener & ring and base
locking screw from the pipe.
Insert the pipe through the hole in the
centre of the base and twist into position.
Secure the pipe to the base with the
fastener, ring and base locking screw, in
that order. (See picture)
1.Front Grill
2.Blade
3.Rear Guard Fixation Screws
4.Rear Grill
5.Motor Shaft
6.Motor
7.Oscillation Control
8.Control Switch
9.Knob
10.Pipe
11.Base
12.Ring
13.Base Locking Screw
Assembly
Components
Fasten the rear grill onto the motor with the
four rear grill screws provided.
Install the fan blade onto the motor shaft by
tightening the blade screw.
Centre the front grill by aligning the logo on
the grill hub so it is horizontal and parallel
to the floor. Then secure the front and rear
grills completely together by snapping grill
clips into place. Lastly, tighten the grill
locking screw at the bottom of the rear grill.

WARNING: Keep all objects
at least 1 metre from the front,
sides and rear of the appliance
Fan control switch
The control switch positions are:
•0 = Off
•1 = Low speed
•2 = Medium Speed
•3 = High Speed
Place the fan on a dry, level and sturdy
surface.
Plug the power cord into the socket,
making sure the speed control is in the off
position.
To operate the fan, turn speed control dial
clockwise until desired wind speed is
achieved.
Adjust tilt by turning neck piece assembly
(9) and tilting body to the desired wind
direction (i.e. Either upward or downward).
To activate the oscillation function, push
down the oscillation pin (7) on the top of
the motor. The fan will then oscillate until
the pin is pulled back up.
IMPORTANT! NEVER COVER THIS
APPLIANCE!
Always choose a safe location for the fan, keeping in mind the safety precautions
outlined. Ensure all packaging has been removed from the unit before use. This
appliance requires no installation, it should be used solely as a portable
appliance.
Operating your Fan

Goldair –New Zealand
Monday –Friday 8am-5pm
Phone [phone]
Phone [phone]
[email protected]
Goldair –Australia
Monday –Friday 8am-5pm
Phone [phone]
Phone [phone]
[e-mail]
SUPPORT AND TECHNICAL ADVICE
PROOF OF PURCHASE
To receive warranty retain receipt as proof of purchase. (Refer to back of booklet).
The fan requires regular cleaning to
ensure trouble free operation.
Ensure that the fan is switched off from
the supply mains before removing the
guard.
Unplug the fan from the mains supply
before cleaning.
Use a damp cloth (not wet) to wipe the
exterior of the fan to remove dust and
dirt.
Use a vacuum cleaner to remove dust
and fluff from around the grills.
Ensure the fan is dry before plugging
back into the mains supply.
Do not attempt to dismantle the fan.
There are no user serviceable parts.
For service or repair, contact an
authorised electrical service
technician.
Cleaning

Thank you for purchasing this Goldair product. Your product is warranted against faults and manufacture when used in
normal domestic use for a period of one year. In non-domestic use Goldair limits the voluntary warranty to three months.
Goldair undertake to repair or replace this product at no charge if found to be defective due to a manufacturing fault during
the warranty period.
This warranty excludes damage caused by misuse, neglect, shipping accident, incorrect installation, or work carried out by
anyone other than a qualified electrical service technician.
PLEASE KEEP YOUR RECEIPT AS THIS WILL HELP VERIFY YOUR WARRANTY.
The benefits to you given by this warranty are in addition to other rights and remedies available to you under a law in
relation to the goodsor services to which this warranty relates.
In Australia, our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are
entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
In New Zealand this warranty is additional to the conditions and guarantees of the Consumers Guarantee Act (1993).
One Year Warranty
Goldair One Year Warranty (IMPORTANT: Please complete and retain this warranty card)
Name
Address
Place Of Purchase Date of Purchase
Name Of Product Model Number
Attach a copy of the purchase receipt to this warranty card
Due to continual design improvements, the product illustrated in this User Manual may differ slightly from the actual product.
Goldair –New Zealand
CDB Goldair
PO Box 100-707
N.S.M.C
Auckland, 0745
Phone [phone]
Phone [phone]
www.goldair.co.nz
Goldair –Australia
CDB Goldair Australia Pty
PO Box 574
South Morang
Victoria, 3752
Phone [phone]
Phone 1300 GOLDAIR (1300 465 324)
www.goldair.com.au