Goldair Select GSWF40R User manual

Operating Instructions
40cm Wall Fan with Remote
Item: GSWF40R

1. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
2. Children should be supervised to ensure that they do not play with the appliance.
3. If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
4. Ensure that the fan is switched off from the supply mains before removing the
guard.
5. Use only the voltage specified on the rating plate of the appliance.
6. Keep all objects at least 1 Metre from the front, sides and rear of the appliance
7. This appliance is intended for household use only and not for commercial or
industrial use.
8. Use this appliance only as described in this manual. Any other use is not
recommended by the manufacturer and may cause fire, electric shock or injury.
9. The common cause of overheating is deposits of dust or fluff in the appliance.
Ensure these deposits are removed regularly by unplugging the appliance and
vacuum cleaning the air vents and grills.
10. Always unplug appliance when not in use.
11. When the appliance has been unpacked, check it for transport damage and ensure
all parts have been delivered. If parts are missing or the appliance has been
damaged, contact the Goldair Customer Services Team.
12. If your appliance does not work, or is not working properly, contact the place of
purchase. Repair work on the appliance by unqualified persons can cause serious
risk to the user.
13. Ensure hands are dry before handling the plug or the main unit.
14. Carry out regular checks of the supply cord to ensure no damage is evident.
15. Ensure that the cord is fully extended (not coiled) while in use.
16. Avoid contact with the moving parts. Keep hands, hair, clothing, away from blade
of the fan during operation to reduce the risk of injury to person and/or damage
to the unit.
17. Switch off and use handles provided when moving.
18. It is recommended that this fan is plugged directly into the wall socket.
19. A correctly specified, undamaged extension cord may be used with this fan
provided it is used in a safe manner.
General Care and Safety Guide
Thank you for choosing this Goldair Select product. This Goldair Select appliance has
been designed and manufactured to high standards of engineering and with proper use
and care, as described in this leaflet, will give you years of useful service. Please read
these instructions carefully and keep them for future reference.

TECHNICAL SPECIFICATION
Model: GSWF40R
Supply: 220-240VAC 50Hz
Wattage: 50W
General Care and Safety Guide
20. Never place appliance close to radiant heat source.
21. Never operate in areas where petrol, paint or other flammable liquids are used or
stored.
22. Never use the appliance to dry clothes.
23. Never insert or allow foreign objects to enter any ventilation or exhaust opening,
as this may cause an electric shock, fire or damage to the appliance.
24. Never use abrasive cleaning products on this appliance. Clean with a damp cloth
(not wet) rinsed in hot soapy water only. Always remove plug from the mains
supply before cleaning.
25. Never connect the appliance to mains supply until completely assembled and
adjusted.
26. Never remove plug from power socket until the appliance has been switched off.
27. Never remove plug from power socket by pulling cord –always grip plug.
28. Never twist, kink or wrap the cord around the appliance, as this may cause the
insulation to weaken and split. Always ensure that all cord has been removed from
any cord storage area and is unrolled before use.
29. Never use this appliance in the immediate surrounds of a bath, a shower, or a
swimming pool or other liquids. The appliance must not be immersed in any
liquids.
30. Due to the risk of injury, never use this appliance for any purpose other than its
intended use. This appliance is intended for use in household and similar
applications such as staff kitchen areas in shops, offices and other working
environments; farm houses, by clients in hotels, motels, bed and breakfast type
environments and other residential type environments
31. Never use this appliance outdoors.
32. Never operate the appliance with a damaged cord or plug, after it malfunctions, or
if it has been damaged in any manner. Have the appliance checked and repaired
by a qualified electrician if repair is necessary.
33. Never place the unit in wardrobes or other enclosed spaces as this may cause fire
hazards.

Components
1. Front Grill
2. Fan Blade Nut
3. Fan Blade
4. Rear Grill Screw
5. Rear Grill
6. Motor Shaft
7. Motor Housing
8. Tilt Neck
9. Switch Housing
10. Pull Control
11. Oscillation Pull Control
12. Wall Mounting Bracket
13. Wall Plugs
14. Fixing Screw
15. Grill Screw
16. Remote Control
16

Wall Mounting
Select an appropriate location and fix the
mounting bracket onto a strong wall (or locate
astud behind plaster boards) with three wall
plugs and screws supplied.
Note:Consider a location within a distance of
0.8m radius from a wall power outlet to make
sure you can plug the unit into the power
point easily.
Mount the wall fan on the mounting hook and
plug in the unit.
If the power cord is hanging loosely between
the fan and the power outlet, make sure it will
not touch or obstruct fan blade rotation or fan
oscillation in any way.
Assembly
Assembly
Remove the rear grill locking nut from the motor
shaft. Fit the rear grill by positioning it on the
location pins. Secure the rear grill to the motor
body with the rear grill locking nut.
Push the fan blade onto the motor shaft until the
fan blade is appropriately fitted. Secure the blade
with the fan blade securing nut by turning it anti-
clockwise.
Check that the fan blade rotates freely by turning
it with your hand.
Open securing clips around the front grill and
loosen the screw at the bottom of the front grill.
Position the top clip on the uppermost part of
the rear grill. Push the top clip down and press
rim of the front grill onto the rear grill. Close all
clips around and tighten the grill screw.
You can adjust the tilt of the fan head by
slightly loosening the tilt screw and moving the
fan head until it reaches the desired angle.
Secure by re-tightening the tilt screw.
Caution: The fan should be switched off when
making these adjustments.

Always choose a safe location for the fan, keeping in mind the safety precautions
outlined. Ensure all packaging has been removed from the unit before use. This appliance
requires no installation, it should be used solely as a portable appliance.
Operating your Fan
Fan control
Switch the appliance on by pressing the on/speed
button on the control panel. The fan starts to
blow at low speed in normal mode. The low
speed indicator will illuminate.
On/Speed
To change the speed, press on/speed button. Fan
speed will change with each button press and the
corresponding indicator light will illuminate.
Swing
Press this button to activate the oscillation for
widespread breeze distribution.To stop the
oscillation, press this button again.
Mode
This fan has 3 different wind modes; Normal,
Natural and Sleep.
Press this button to change the mode.
Normal: In this mode, the fan operates at a
constant speed
Natural: In this mode, the fan simulates a natural
breeze by cycling on & off
Sleep: In this mode, the fan starts off with a
strong breeze, then gradually reduces to medium
and then low before repeating this cycle
Timer
Press the timer button repeatedly to change
the timer setting. The time increases in
increments of 0.5 hours and it has 4 time steps
in total, which add up to set your desired timer
setting. The maximum timer setting is 7.5 hour.
For example, to set the time for 5 hours, press
the timer button repeatedly, till the indicator
lamps “1h” and “4h” are lit at the same time.
Do not press timer button if you want to keep
your fan operating indefinitely –the timer
indicator lamps will not light up if the timer
button is not pressed.
Remote Control
Slide out the battery cover with your thumb on
the mark at the back of the remote control.
Insert the 2 x AAA batteries (not included)
following the polarity symbols (+/-), and then
replace the cover to the battery compartment.
When replacing batteries, always replace all
batteries with the new ones of the same size
and type. Do not mix old and new batteries.
The symbols on the remote control correspond
to the symbols on the main unit.
WARNING Keep all objects at least 1 metre from the front and sides of
the appliance

Cleaning
SUPPORT AND TECHNICAL ADVICE
PROOF OF PURCHASE
To receive warranty retain receipt as proof of purchase. (Refer to back of booklet).
Goldair –New Zealand
Monday –Friday 8am-5pm
Phone [phone]
Phone [phone]
[email protected]
Goldair –Australia
Monday –Friday 8am-5pm
Phone [phone]
Phone [phone]
[email protected]
To avoid risk of electric shock, before cleaning,
you MUST ALWAYS switch off and unplug the
fan before cleaning.
Use only a soft, damp cloth to gently wipe the
fan and dry well.
To access the fan blade , remove the front
guard and securing screw.
Do not immerse the fan in water and never
allow water to enter the motor housing.
Do not use harsh chemicals to clean the fan.

Thank you for purchasing this Goldair Select product. Your product is warranted against faults and manufacture when used in
normal domestic use for a period of one year. In non-domestic use Goldair limits the voluntary warranty to three months.
Goldair undertake to repair or replace this product at no charge if found to be defective due to a manufacturing fault during the
warranty period.
This warranty excludes damage caused by misuse, neglect, shipping accident, incorrect installation, or work carried out by anyone
other than a qualified electrical service technician.
PLEASE KEEP YOUR RECEIPT AS THIS WILL HELP VERIFY YOUR WARRANTY.
The benefits to you given by this warranty are in addition to other rights and remedies available to you under a law in relation to
the goods or services to which this warranty relates.
In Australia, our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a
replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a
major failure.
In New Zealand this warranty is additional to the conditions and guarantees of the Consumers Guarantee Act (1993).
One Year Warranty
Goldair One Year Warranty (IMPORTANT: Please complete and retain this warranty card)
Name
Address
Place Of Purchase Date of Purchase
Name Of Product Model Number
Attach a copy of the purchase receipt to this warranty card
Due to continual design improvements, the product illustrated in this User Manual may differ slightly from the actual product.
Goldair –New Zealand
CDB Goldair
PO Box 100-707
N.S.M.C
Auckland, 0745
Phone [phone]
Phone [phone]
www.goldair.co.nz
Goldair –Australia
CDB Goldair Australia Pty
PO Box 574
South Morang
Victoria, 3752
Phone [phone]
Phone 1300 GOLDAIR (1300 465 324)
www.goldair.com.au