Goldair FMF100 User manual

MilkFrother
Item: FMF100, FMF100R
Operating Instructions

Thank you for choosing a Goldair Electric Milk Frother. This Goldair
appliance has been designed and manufactured to high standards of
engineering and with proper use and care, as described in this leaflet, will
give you years of useful service. Please read these instructions carefully.
ALWAYS
✔Always ensure hands are dry before
handling the plug or the Milk Frother.
✔Always operate the Milk Frother on a
secure, dry, level surface.
✔Always use the Milk Frother only with the
stand provided.
✔Always allow adequate air space above
and on all sides for air circulation. Do not
allow the Milk Frother to touch curtains, wall
coverings, clothing, dishtowels or other
flammable materials during use. Do not use
under cupboards or curtains.
✔Always be sure to unplug from the socket
when not in use and before cleaning.
✔Always allow the Milk Frother to cool
before cleaning and storing.
✔Carry out regular checks of the supply
cord to ensure no damage is evident.
✔Return the Milk Frother after a
malfunction, or if it has been damaged in
any manner to an authorised electrical
service technician for examination, repair or
adjustment as special purpose tools are
required.
NEVER
✘Never touch hot surfaces.
✘Never use this appliance outdoors.
✘Never use this appliance for any purpose
other than its intended use. This appliance is
intended for use in household and similar
applications such as staff kitchen areas in
shops, offices and other working
environments; farm houses, by clients in
hotels, motels and other residential type
environments, bed and breakfast type
environments.
CAUTION:
THE MILK FROTHER GENERATES
HEAT AND STEAM DURING USE.
PROPER PRECAUTIONS MUST BE
TAKEN TO PREVENT THE RISK OF
BURNS, SCALDS, FIRES OR OTHER
DAMAGE TO PERSONS.
General care and safety guide
TECHNICAL SPECIFICATION
Item: FMF100, FMF100R
Supply: 220-240VAC 50Hz AC
Power: 500W
✘Never operate this Milk Frother on an
inclined plane.
✘Never operate this Milk Frother unless the
element is fully immersed.
✘Never move this Milk Frother while it is
switched on.
✘This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities or
lack of experience and knowledge, unless
they are supervised or have been given
instruction concerning the use of the Milk
Frother by a person responsible for their
safety.
✘Close supervision is necessary when the
appliance is near children.
✘Never leave the appliance unattended
when in use.
✘Never place this appliance on or near a
hot gas or electric burner or where it could
touch a heated oven or microwave oven.
✘Never immerse any part of the Milk
Frother, or cord set and plug in water or any
other liquid to protect against electrical
hazards.
✘Never use harsh, abrasive or caustic
cleaners to clean this appliance.
✘Never operate the appliance with a
damaged cord or plug, after it malfunctions,
or if it has been damaged in any manner.
✘The Milk Frother is not intended to be
operated by means of an external timer or
separate remote-control system.
CAUTION:
IF THE MILK FROTHER IS OVERFILLED,
HOT MILK MAYBE EJECTED

1. Lid
2. Housing
3. Handle
4. Heat button
5. Foam/froth button
6. Heat blade
7. Foam/froth whisk
First use of Milk Frother
For first time use it is recommended that you
fill the Milk Frother to the maximum level
mark with fresh tap water, then operate,
empty and repeat at least two times to clear
the Milk Frother of any dust or materials
from the manufacturing process. Do not
drink this water.
CAUTION:
TOO LITTLE MILK MAY DAMAGE THE
HEATING ELEMENT AND OVERFILLING
MAY CAUSE HOT MILK TO BE EJECTED.
Components
1
2
3
4
5
6
7

1. Remove the Milk Frother from the base to
pour in milk. Insert EITHER HEATING or
FROTHING whisk.
2. Pour milk into the Milk Frother to the
desired level. Use whole milk (fat content
>3%) for best results. Note the unit’s
capacity range is 80-115ml for frothing
/foaming and 80-240ml for heating). Press
the lid on and place the Milk Frother back
on the base unit.
3. Connect the plug into a power outlet, turn
on at power outlet.
4. To FROTH cold milk, press the BOTTOM
button. The button will illuminate in. When
the cycle is complete (about 100 seconds),
the light will flash for about 30 seconds.
5. To HEAT and FROTH milk, press the TOP
button. The button will illuminate. When the
cycle is complete (about 60 seconds), the
light will flash for about 30 seconds.
6. Turn unit off at wall. Remove unit from
base. Carefully remove lid and pour milk
into your drink.
7. Allow 2-3 minutes between uses to avoid
overheating and to allow thermostat to
reset.
8. If you bump or press a button during
operation, the unit will stop. Simply press
the button again to restart.
WARNING: DO NOT REMOVE THE LID
WHILE THE MILK IS HEATING/FROTHING
USE ONLY THE STAND PROVIDED WITH
THIS APPLIANCE
CAUTION: DO NOT OPERATE THE MILK
FROTHER ON AN INCLINED PLANE
DO NOT MOVE THE MILKF FROTHER WHILE
IT IS SWITCHED ON
CAUTION: ENSURE THAT THE MILK
FROTHER IS SWITCHED OFF BEFORE
REMOVING IT FROM ITS STAND
Operating your Milk Frother
Care and cleaning
1. Do not attempt to dismantle the Milk
Frother or power base. There are no user
serviceable parts. For service or repair,
contact an authorised electrician.
2. Always unplug from the plug socket and
allow to cool down before cleaning.
3. Remove the heating and foaming/frothing
whisks before cleaning.
4. TO CLEAN INSIDE THE MAIN UNIT –
wipe inside walls with a soft cloth and
warm soapy water. Dry with a soft cloth.
Use a soft brush to clean around and
under the motor shaft.
5. TO CLEAN OUTSIDE OF MAIN UNIT –
use a sponge or soft cloth to wipe clean.
DO NOT use abrasive or alkaline cleaning
agents. To avoid scratches, DO NOT use
hard nylon or metal brushes or cleaning
pads.
6. TO CLEAN THE LID –wash with warm
soapy water and a soft cloth. Dry with a
soft cloth.
7. TO CLEAN THE HEATING AND
FOAMING/FROTHING WHISKS –remove
from unit. Wash in warm water. Dry and
store in safe place. Do not place in
dishwasher.
Goldair –New Zealand
Monday –Friday 8am-5pm
Phone [phone]
Phone [phone]
[email protected]z
Goldair –Australia
Monday –Friday 8am-5pm
Phone [phone]
Phone [phone]
[e-mail]
SUPPORT AND TECHNICAL ADVICE

CAPPUCCINO
1/3 espresso in cup/glass
Add 2/3 frothed milk
Top with cocoa powder
LATTE MACCHIATO
Pour frothed milk into tall glass
Add espresso carefully, pouring down side of
milk
CAFFE LATTE
1/3 espresso in cup/glass
Add 2/3 heated milk and stir
HOT CHOCOLATE
Pour heated milk into mug
Add chocolate powder and stir well
Serving suggestions
Troubleshooting
Issue Possible Cause Action
Indicator light does not work Plug not inserted correctly
Poor contact between unit
and base
No power at outlet
Check plug is inserted fully
Reset unit on base
Check power to outlet
Unit starts operating then
stops Temperature is too high
Unit damaged due to
immersion in water
Allow 2-3 minutes between
uses. Rinse inside of unit
carefully with cold water to
reduce temperature
Try electrical repair centre
Motor does not work Unit has not been cleaned
and residual milk has blocked
motor shaft
Ensure you clean unit after
each use, according to
instructions
Unit is not heating Motor has been damaged Try repair centre
Milk is burning Too little or too much milk in
unit
Unit has been used without
cleaning after last use
Keep milk volume within
heating capacity of 80-115ml
Ensure you clean unit after
each use, according to
instructions

Name ………………………………………………
Address ……………………………………………
……………………………………………………….
Suburb ……………………………………………
Purchased from …………………………………
Date of purchase …………………………………
Name of product …………………………………
Model no ……………………………………………
IMPORTANT: Please complete and retain this warranty card
Two year warranty
Thank you for purchasing this Goldair product. Your product is warranted against faults and manufacture
when used in normal domestic use for a period of two years. In non-domestic use Goldair limits the
voluntary warranty to three months.
Goldair undertake to repair or replace this product at no charge if found to be defective due to a
manufacturing fault during the warranty period.
This warranty excludes damage caused by misuse, neglect, shipping accident, incorrect installation, or
work carried out by anyone other than a qualified electrical service technician.
PLEASE KEEP YOUR RECEIPT AS THIS WILL HELP VERIFY YOUR WARRANTY.
The benefits given to you by this warranty are in addition to other rights and remedies available to you
under law in relation to the goods or services to which this warranty relates.
In Australia, our goods come with guarantees that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement or refund for a major failure and compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major failure.
In New Zealand this warranty is additional to the conditions and guarantees of the Consumers Guarantee
Act (1993).
Attach a copy of the purchase receipt to this warranty card
Due to continual design improvements, the product illustrated in this User Manual may differ slightly from the actual product.
Goldair –New Zealand
CDB Goldair
PO Box 100-707
N.S.M.C
Auckland
Phone [phone]
Phone [phone]
www.goldair.co.nz
Goldair –Australia
CDB Goldair Australia Pty
PO Box 574
South Morang
Victoria, 3752
Phone [phone]
Phone 1300 GOLDAIR (1300 465 324)
www.goldair.com.au