Golden Bear Tool C12 User manual

C12
1
Golden Bear
C
C 1
1
2
2
B
B
a
a
t
tt t
e
e
r
r
y
y
T
T
e
e
n
n
s
s
i
i
o
o
n
n
e
e
r
r
operation Manual and Parts List
Please read entire manual before operating the tool. Failure to comply with safety guidelines may result in serious injury or death.

C12
2
Golden Bear
SAFETY
1. Review enclosed C12 operation and safety materials before operating the tool. Only trained
professionals are advised to operate the Golden Bear Tool.
2. Keep fingers, clothing, and other objects away from the front of the tool, moving parts, strap,
and buckle during operation.
3. Be cautious of excessive tensioning. Over tensioning the strap may result in severe injury
due to a break in strapping, which could cause airborne strapping materials or tool parts.
4. Wear protective eye equipment when operating the tool.
5. Use only recommended strapping for the Golden Bear C12 tool: Woven and Composite
strapping 3/4”, 1”, 1 1/4”, and 1 1/2”.
6. Inspect tool regularly and discontinue use if parts begin to malfunction or wear.
7. Since the C12 tool is battery operated, keep away from water and damp areas. Toclean,
spray with compressed air or wipe with a dry cloth.
8. Reapply strap if damaged, including the area by the gripper foot.
9. Remove battery when tool is not in use or during tool maintenance.

C12
3
Golden Bear
operating instructions
1. Set up
2. Secure Strapping
3. Tension
4. Removal
Insert bottom strap by squeezing the
handle and feeding the strap under
the gripper.
Insert strap coming off buckle into the
windlass.
Select gear. Pull the trigger to desired
tension.
Squeeze handle, and pull the tool to
the right to remove.

C12
4
Golden Bear
Item #
Description
QTY.
1
Housing
1
2
Adaptor
1
3
Drill
1
4
Battery
1
5
Pin
1
6
Pin
1
7
Pin
1
8
Screw
2
9
Upper Bearing
1
10
Worm Shaft
1
11
Worm
1
12
Worm Shaft Key
1
13
Lower Bearing
1
14
Lever
1
15
Lever Spring
1
16
Pin
1
17
Screw
1
18
Inner Windless Bearing
1
19
Clip
1
20
Worm Gear
1
21
Outter Windless Bearing
1
22
Windless Shaft
1
23
Keys
2
24
Torsion Spring
1
25
Clip
1
26
Roller
1
27
Pin
1
28
Gripper Shaft
1
29
Gripper
1
30
Gripper Arm
1
31
Gripper Spring
1
32
Screw
1
33
Gripper Stop With Screw
1
34
Release Handle
1
C12 Parts List

C12
5
Golden Bear
Schematic

C12
6
Golden Bear
1. Always comply with the strapping manufacturer limitations. Applying insufficient banding for
the load, using insufficient buckles, or applying more tension than the strapping is able to
handle may cause serious damage to the operator, tool, and the package.
2. Any modifications to the Golden Bear tool should be made by Golden Bear only. Should
your tool need attention, contact your Golden Bear Sales Representative.
3. The Golden Bear tool has been manufactured with the highest attention to detail, quality,
and safety. If for any reason you do not feel that your Golden Bear tool is performing up to
standards, or if the tool is presenting difficulty in operation, contact your Golden Bear Sales
Representative and discontinue use immediately.
Golden Bear LLC
Made in the United State of America
Patents Pending
©Copyright 2016, Golden Bear LLC
Warning