golmar Soul S5110/ART 7W User manual

Cód. 50122126 TS5110 ART 7W ES REV.0119
Soul kit
G2+ 2 wire installation
Art 7W monitor
with Wi-Fi connectivity
Instructions manual

SOUL S5110/ART 7W VIDEO INTERCOM KIT 2
INDEX
Index..........................................................................................................................................................................2
Recommendations.....................................................................................................................................................3
System operation.......................................................................................................................................................3
FA-G2+ power supply ................................................................................................................................................4
Description ......................................................................................................................................................4
Installation .......................................................................................................................................................4
Soul door panel....................................................................................................................................................5 to 8
Description ......................................................................................................................................................5
Installation .......................................................................................................................................................6
Wiring connectors............................................................................................................................................6
Configuration switches.....................................................................................................................................7
Audio level adjustment.....................................................................................................................................7
Proximity reader programming.........................................................................................................................8
Art 7W/G2+ monitor ...........................................................................................................................................9 to 21
Description ......................................................................................................................................................9
Installation .....................................................................................................................................................10
Wiring connectors..........................................................................................................................................10
Configuration switches...................................................................................................................................10
Main menu .....................................................................................................................................................11
Settings menu........................................................................................................................................12 to 15
Communication screen..................................................................................................................................16
Picture and communication adjustments........................................................................................................17
Intercom menu.......................................................................................................................................18 to 19
Recordings menu ..................................................................................................................................20 to 21
G2Callapp .......................................................................................................................................................22 to 29
Initial registration of a monitor to a Wi-Fi network ....................................................................................22 to 23
Registration of an already network connected monitor....................................................................................24
Advanced settings of a registered monitor..............................................................................................25 to 26
Main screen ...................................................................................................................................................27
Communication screen..........................................................................................................................28 to 29
Installation diagrams........................................................................................................................................30 to 34
Wiring sections and distances........................................................................................................................30
One apartment with one access door and one monitor....................................................................................30
One apartment with two access doors and one monitor ..................................................................................30
One apartment with two access doors and up to four monitors daisy chain connected.....................................31
One apartment with two access doors and four monitors through video distributor..........................................31
Four apartments with two access doors and up to four monitors daisy chain connected ..................................32
Lock release connection ................................................................................................................................33
Relay output auxiliary device connection........................................................................................................33
Exit button connection....................................................................................................................................34
External CCTV camera connection................................................................................................................34
Door bell push button connection ...................................................................................................................34
Special codes ..................................................................................................................................................35 to 36
Soul door panel installation template ........................................................................................................................37
Art 7 monitor installation template.............................................................................................................................38
Notes .......................................................................................................................................................................39

3
SYSTEM OPERATION
To make the call, the visitor must press the corresponding button to the apartment with which he wishes to establish
communication; an acoustic tone will warn that the call is being made and the led will light up. At that moment, the
monitor (s) of the apartment receives the call. If the pushbutton of another apartment has been pressed by mistake,
press on the one that corresponds to the desired apartment, thus canceling the first call.
In systems with two access doors, the other door panel will be automatically disconnected: if another visitor wishes to
call, some acoustic tones will warn that the system is busy and the led will light up.
Upon receiving the call, the image will appear on the main monitor screen (and secondary 1, if any) without the visitor
perceiving it. If you want to view the image from the secondary monitors 2 or 3, click on the screen to display the
image. If the call is not answered within 30 seconds, the led will turn off and the system will be free.
If the call transfer was programmed to your mobile phone, you can cancel the transfer at any time from the monitor,
being necessary to contact the door panel from the main menu.
To establish communication, click on the screen on the off-hook icon. The led on the door panel will light up. The
communication will last for 90 seconds or until you click on the hanging icon. Once the communication is complete,
the led will turn off and the system will be free.
To open the door or activate the auxiliary output of the door panel, click on the corresponding icon. A single press
activates the lock release or the auxiliary output for 3 seconds, and the led on the door panel illuminates. The
activation time is programmable, as indicated on pages 35 to 36.
The detailed operation of the monitor is described on pages 11 to 21.
The owner of the apartment can activate the lock release by approaching the proximity key to the reader. If the
proximity key is maintained for three seconds, the auxiliary relay output will be activated.
RECOMMENDATIONS
- Use, preferably, Golmar RAP-GTWIN / HF cable (2x1mm²).
- Installation wires must be at least 40cm away of any other installation.
- When modifications are made to the installation, do so without power.
- The installation and handling of this equipment must be carried out by authorized personnel.
- Check all connections before system start up.
- Follow the instructions in this manual at all times.
SOUL S5110/ART 7W VIDEO INTERCOM KIT

4
FA-G2+ POWER SUPPLY
Description
B
A. Operating light indicator.
B. Mains protection cover.
C. Mains input terminals without protection cover.
D. DIN rail fixing clip.
E. Wiring connectors.
A
ED
BUS(M) BUS(PL)
Installation
The installation and manipulation of the power supply must be carried out by authorized personnel and in the
absence of electric current.
Install the power supply in a dry, protected and ventilated place. Under no circumstances obstruct the ventilation
grilles. Use a DIN 46277 guide for fastening (8 elements).
Remember that the current regulations require to protect the power supply with a circuit breaker.
To avoid electric shock, do not remove the protection cover without first disconnecting the power supply. Re-install
it once all connections are complete.
Connect the cables to the wiring connectors following the indications of the installation diagrams.
C
SOUL S5110/ART 7W VIDEO INTERCOM KIT

5
SOUL DOOR PANEL
Description
A
B
C
F
E
D
J
I
G
J
G
H H
B
C
D
L
M M
K M
Q
O
O
P
I
N
T
K
R
S
A. System status icons:
Call is in progress.
In communication.
Lock release activated.
System is busy.
B. System status light indicators.
C. Light sensor.
D. Night vision illumination.
E. Protective polycarbonate.
F. Name holder and proximity reader.
G. Speaker grille.
H. Colour camera.
I. Push button (s).
J. Microphone hole.
K. Fixing screw.
L. Proximity reader.
M. Wall fixing holes (x3).
N. Proximity reader sealing gasket.
O. Wiring connectors.
P. Cable gland seal.
Q. Proximity reader connector.
R. Configuration switches.
S. Audio level potentiometer.
T. Proximity reader configuration push button.
SOUL S5110/ART 7W VIDEO INTERCOM KIT

6
Installation
The door panel has been designed to withstand various environmental conditions. However, we recommend
taking additional precautions to extend its life, such as to place it in a protected place.
To obtain optimum image quality, avoid backlighting caused by light sources (sun, lampposts, ...).
For a correct installation, use the supplied template (page 37).
1. Locate the top of the template at a height of 1.65m, and make three 6mm holes at the indicated points. Insert the
supplied plugs.
2. Remove the metal front of the door panel by loosening the screw on the bottom with the key that is attached. On
the back of the front you will find the name holder label.
3. Remove the screws that hold the proximity reader and pass the installation cables through the cable gland seal.
4. Fix the door panel to the wall using the screws provided.
5. Connect the cables to the removable wiring connectors following the indications of the installation diagrams.
Before replacing the proximity reader and closing the door panel, make the necessary adjustments (programming
of proximity keys, adjusting the audio level, ...), as indicated throughout this manual. Make sure that the sealing
gasket of the proximity reader is correctly positioned.
Wiring connectors (O)
For a more comfortable installation, the wiring connectors are removable and are supplied in a separate bag. Once
the connectors are wired, place them in their position.
BUS BUS CV- CV+ AP+
C NA GND CCTV AP-
ON
1 2 3 4
BUS, BUS: communication bus (polarity free).
CV-, CV+: 12Vd.c. lock release output (270mA maximum).
AP+, AP-: remote activation push button input.
C, NA: voltage free relay output (6A/24V maximum).
GND, CCTV: external analog CCTV camera input.
SOUL S5110/ART 7W VIDEO INTERCOM KIT
SOUL DOOR PANEL

7
Configuration switches (R)
Configuration changes must be made with the equipment switched off. If they are carried out with the equipment
on, disconnect it for 10 seconds after any modification.
All switches are factory-set to the OFF position.
Switch 1.
Sets the door panel address.
OFF
* OFF-OFF
OFF
ON
ON-OFF
ON
Door panel 1 Door panel 2
1 apartment
* Same value than when set to ON-ON.
Enabled
2 apartments
Disabled
Switches 2 and 3.
Set the number of apartments:
1: all push buttons call to apartment n.1.
2: the two lower push buttons call to apartment n.1,
the two upper push buttons call to apartment n.2.
4: each push button calls to a different apartment (n.1 to 4).
Switch 4.
Disables door panel acoustic tones.
OFF-ON
4 apartments
Audio level adjustment
If after the start-up of the system you consider that the audio volume on the door panel is not suitable, use the
adjustment potentiometer (S). This regulation affects the audio level of the communication and that of the
confirmation tones.
ON
12 3 4
ON
12 3 4
ON
12 3 4
ON
12 3 4
ON
12 3 4
ON
1 2 3 4
ON
1 2 3 4
SOUL S5110/ART 7W VIDEO INTERCOM KIT
SOUL DOOR PANEL
BUS BUS CV- CV+ AP+
C NA GND CCTV AP-
ON
1 2 3 4

8
Proximity reader programming (L)
Make sure the equipment is powered and the reader connected to the door panel (Q).
To be able to add user keys (up to 60) in the memory of the proximity reader, it is necessary to create a
programming key and a user registration key. In order to facilitate identification, we recommend using the yellow
key to program and the blue key to register users. Use the gray ones as user keys.
Creation of programming and registration keys.
NOTE: this process completely erases the memory of the proximity reader.
Press the programming button of the proximity reader (T): the door panel will emit six short tones. Before ten
seconds approach the programming key, emitting the door panel a short confirmation tone and right after the
user registration key, issuing the door panel a long confirmation tone. If after pressing the programming
button no key is approached within ten seconds, the door panel will emit a long tone, and the memory will be
completely erased.
Once the programming and registration keys have been created, the addition and deletion of user keys can be
done with the door panel closed.
Adding user keys.
Approach the registration key to the reader: the door panel will emit four short tones. Approach one by one the
user keys that you want to add, emitting the door panel a short tone for each key added. After ten seconds
have passed since adding the last key, the door panel will emit a long tone to confirm the completion of the
process.
Deletion of an user key.
Approach the programming key to the reader: the door panel will emit four short tones. Approach the user key
that you want to delete, emitting the door panel a long tone to confirm the deletion. After ten seconds, if there
is no key to delete, the door panel will emit a long tone to confirm the completion of the process. Repeat this
process to delete other user keys.
Deletion of all user keys.
Approach the programming key to the reader: the door panel will emit four short tones. Approach the registration
key, emitting the door panel a long tone to confirm the deletion of all the keys. After ten seconds, if the
registration key has not been approached, the door panel will emit a long tone to confirm the completion of the
process.
BUS BUS CV- CV+ AP+
C NA GND CCTV AP-
ON
1 2 3 4
SOUL S5110/ART 7W VIDEO INTERCOM KIT
SOUL DOOR PANEL

9
ART 7W/G2+ MONITOR
Description
A. Speaker.
B. Notification icons:
Power on indication.
Do not disturb.
Auxiliary relay activated.
Lock release activated.
New picture / video.
Wi-Fi call transfer activated.
C. Hidden push button. Starts / ends communication.
D. Orientation dots for blind people.
E. Touch screen.
F. Hidden push button to activate the lock.
G. Microphone.
H. Micro SD card slot.
I. Wall bracket slots (x4).
J. Configuration switches.
K. Wiring connectors.
L. UID monitor sticker.
SA
A
E
B
C
D
F
G
GND
HZ
HZ
BUS
BUS
24V
GND
ON
1 2 3 4 5 6 7 8
H
I
J
KL
I
I
I
UID: mnvx8d8uskpv
K
SOUL S5110/ART 7W VIDEO INTERCOM KIT

10
Installation
Avoid locations near heat sources, dusty or with a lot of smoke.
For a correct installation, use the supplied template (page 38).
1. Locate the top of the template at a height of 1.65m.
2. If you are going to use an embedding box to pass the cables, match it with the holes corresponding to the chosen
box model and fix the bracket. If you prefer to fix the bracket directly on the wall, make four 6mm holes at the
indicated points; insert the supplied plugs and screw the bracket.
3. Pass the installation cables through the central hole and connect them to the removable wiring connectors
following the indications of the installation diagrams. Before connecting the wiring connectors to the monitor, set
the configuration switch as indicated below.
4. Connect the wiring connectors to the monitor and place the monitor front to the bracket, matching the slots.
Move the monitor down to fix it.
Wiring connectors (K)
For a more comfortable installation, the wiring connectors are removable and are supplied in a separate bag. Once
the connectors are wired, place them in their position.
BUS, BUS: communication bus (polarity free).
24V, GND: local power supply input.
SA, GND: ringer output (50mA/12V maximum).
HZ, HZ: doorbell push button input.
SA
GND
HZ
HZ
BUS
BUS
24V
GND
ON
1 2 3 4 5 6 7 8
Configuration switches (R)
Switches 1 to 5.
Assign the monitor address corresponding to its push button on the door panel. Switches 3 to 5 must remain in
the OFF position.
Apartment 1 Apartment 2 Apartment 3 Apartment 4
ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
Switches 6 and 7.
They define if the monitor is master or secondary. Each apartment must have a master monitor only. In the case
of apartments with more than one monitor, the monitor with WiFi transmitter should always be the master one.
Switch 8.
Loads the monitor with the end of line resistor when set to ON. Activate it on those monitors where the bus cable
path ends. Deactivate it only in the intermediate monitors.
Slave 1 Slave 2 Slave 3Master
ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
SOUL S5110/ART 7W VIDEO INTERCOM KIT
ART 7W/G2+ MONITOR

11
Main menu
09:27PM
31-01-2019 Wed
Door panel Intercom Recordings Settings
If the monitor is on standby mode (screen off), touch anywhere on the screen to activate it and the main menu will
appear. The monitor will return to the standby mode after 1 minute without activity.
It allows to see the image coming from the door panels and cameras connected to the system
It access to the intercom menu with other system monitors.
Displays the list of images recorded in the monitor's memory. If there are new images or some are not
yet displayed, the quantity will be shown in the upper right part of the icon. If the amount is greater
than 9, three points will be shown.
Allows to change system settings.
Switches off the monitor screen. Apaga la pantalla del monitor.
Indicates that the inserted micro SD card must be formatted from the monitor. Press to access the
storage menu and format the card.
Press to enable or disable Wi-Fi transmission. The icon will change color (enabled white, disabled off)
and the notification icon will light depending on the status.
Only the master monitor can activate the Wi-Fi transmission.
Press to enable or disable the "Do not disturb" function (the monitor does not ring when a
call is received). The notification icon will light depending on the status.
2 ...
!
SOUL S5110/ART 7W VIDEO INTERCOM KIT
ART 7W/G2+ MONITOR
Changes the image recording mode during the reception of the call: no recording,
snapshot picture or video. Video mode is only available when a micro SD card
is inserted.

12
Settings menu
It allows you to choose one of the 16 available languages for the user interface. Once chosen, confirm
your selection with the icon, returning the monitor to the settings menu.
Use icon to return to the main menu.
Settings
Do not disturb
Language
Storage
Time & Date
WiFi
Ringtone
About
Background
Italiano Magyar Nederlands Norsk
Português русский Slovenský Svenska
English Español Eλληνικά Français
ﺔﯾﺑرﻌﻟا Čeština Dansk Deutsch
Language
SOUL S5110/ART 7W VIDEO INTERCOM KIT
ART 7W/G2+ MONITOR

13
In order to distinguish the origin of the calls when you are not in front of the monitor, choose different
melodies using the arrows. Once chosen, confirm your selection with the icon.
Personalize the monitor with one of the six available coloured backgrounds. Select your favorite and
validate the changes made with the icon , returning the monitor to the settings menu.
Ringtone
1 / 6
3 / 6
5 / 6
6 / 6
Door panel 1
Door panel 2
Doorbell
Intercom
Background
22 / 02 / 2022
02
03
01
Month
22
23
21
Day
2022
2023
2021
Year
24H
00
01
23
Hour
14
15
13
Min
Time & Date
It allows to adjust the date and time of the system, as well as the presentation format. Change the
values by sliding up or down, and use the arrows to change the formats. Validate the changes
made with the icon, returning the monitor to the settings menu.
SOUL S5110/ART 7W VIDEO INTERCOM KIT
ART 7W/G2+ MONITOR
Settings menu

14
In some countries, the law does not allow the storage of images or videos for more than 30 days after
recording. The automatic erase function performs this task for you. You can deactivate this function
in the case of the legislation of your country does not demand it, or under your responsibility.
If you have not inserted a micro SD card into the monitor, only snapshot pictures can be recorded in
the monitor's internal memory (up to 100). If you have inserted one, the images and videos will
always be recorded on the card, and the images in the internal memory can not be displayed until
you copy them on the card.
From this menu you can delete the contents, copy the internal memory to the SD card and format the
card. Any of these actions will require your confirmation.
Use icon to return to the settings menu.
Storage
Automatic erasing
Picture Copy Picture Video Format
Internal memory Micro SD
In the "Do Not Disturb" settings you can set a time period in which the monitor will not ring when
receiving calls. To do this, activate the timer function and choose the time period. From the main
menu you can activate and deactivate the "Do not disturb" function regardless of the timer status.
If you do not want to be contacted from another monitor, you can deactivate the intercom function. If
you do, you can not contact other monitors either.
Validate the changes made with the icon , returning the monitor to the settings menu.
Do not disturb
Intercom enabled
0000
0101
2323
HourHour
1414
1515
1313
MinMin
Timer
SOUL S5110/ART 7W VIDEO INTERCOM KIT
ART 7W/G2+ MONITOR
Settings menu

15
The "About" screen provides information about the equipment, such as the monitor version and its
address.
Click on the icons to display the QR code that will take you to the updated downloads of this
instruction manual and the G2Call application for your mobile phone.
Use the icon to restore factory settings, such as language, melodies, ... The Wi-Fi parameters will
not be modified.
Use the icon to return to the settings menu.
About
1.03
028 / S2
App
Instructions manual
FW version
Monitor address
During the first system start-up, we recommend to restart the Wi-Fi parameters using the icon.
Remember that only the master monitor can activate the Wi-Fi transmission.
The Wi-Fi menu shows information about the identity of the monitor (UID), the name of the network to
which it is connected (SSID) and the signal strength. Use G2Call application to connect the
monitor to your Wi-Fi network as detailed below.
Choose, using the arrows, the time you want to elapse between the reception of the call from the door
panel and the start of the transfer of the call to the mobile phone. Validate the changes made with
the icon , returning the monitor to the settings menu.
Wi-Fi
05 s
vPKs0d9tvru
Golmar WiFi
Call forwarding delay
UID
SSID
SOUL S5110/ART 7W VIDEO INTERCOM KIT
ART 7W/G2+ MONITOR
Settings menu

16
Communication screen
This screen is displayed when you receive a call or when you press icon from the main menu. The date and
time are shown in the top center of the screen, and the source of the image (door panel 1, door panel 2, camera 1
or camera 2) is shown on the right. After 10 seconds without activity, the icons will disappear; tap anywhere on
the screen to reappear.
Cancels the call or display in progress and returns to the main menu.
Access to the picture and communication settings menu.
Starts or ends audio communication with the displayed door panel. The communication
has a maximum duration of 90 seconds. Once the communication is finished, the
screen will turn off.
Change the image source, as long as the system has more than one door panel or has an external
camera connected and their visualization has been activated (see page 35). It is possible to
change the image source at any time.
Activates the lock release (or device connected to the CV output of the door panel) for 3 seconds
(factory value, programmable by the installer). During activation, the notification icon will light.
Activates the lock release (or device connected to the relay output of the door panel) for 3 seconds
(factory value, programmable by the installer). During activation, the notification icon will light.
In case of having a micro SD card inserted, starts recording a video of 15 seconds. Otherwise, it will
take a snapshot picture. The notification icon will light.
Takes a snapshot picture. The notification icon will light.
1
2
02-02-2222 Door panel 111:17:10
12
SOUL S5110/ART 7W VIDEO INTERCOM KIT
ART 7W/G2+ MONITOR

02-02-2222 Door panel 111:17:10
12
17
Picture and communication adjustments
During the visualization or communication process, it is possible to adjust the parameters of the image (brightness,
contrast and color), the volume of the ringing tone (during visualization) and the audio level of the speaker
(during communication).
Press the icon and use the sliders to make the adjustments. Clicking on the icon again, the settings window will
disappear.
02-02-2222 Door panel 111:17:10
12
SOUL S5110/ART 7W VIDEO INTERCOM KIT
ART 7W/G2+ MONITOR

18
Intercom menu
From this menu you can communicate with other monitors of your apartment (internal intercom) or your building
(external intercom). To do this, your monitor and the called one must have activated the intercom function from
the "Do not disturb" menu.
Use and icons to switch between internal and external intercom screens.
If during the intercom process with another monitor a call is received from the door panel, the intercom process will
be terminated, and the call from the door panel will be received on the corresponding monitor.
Use icon to return to the main menu.
Intercom
Slave 3
Slave 2
Slave 1
Master All
Calling ...
Internal intercom.
Select the monitor with which you want to communicate. The monitor that appears selected by default it’s yours.
You will find information about the monitor's address in the "About" menu. If you select the "All" option, the rest
of the monitors will receive the call, establishing communication with the first one that responds.
To make the call, press on the icon, the message "Calling ..." appears on the screen. The monitor or
monitors that receive the call will display the message "Calling from", followed by the calling monitor address.
To cancel the call press on the icon, appearing the message "Call finished”.
SOUL S5110/ART 7W VIDEO INTERCOM KIT
ART 7W/G2+ MONITOR

Intercom
1
4
7
2
5
8
0
3
6
9
028
19
External intercom.
Enter the code of the apartment with which you wish to communicate using the keypad.
To make the call, press on the icon, the message "Calling ..." appears on the screen. The main monitor of the
called apartment will show the message "Calling from", followed by the calling monitor address. To cancel the
call press on the icon, appearing the message "Call finished".
SOUL S5110/ART 7W VIDEO INTERCOM KIT
ART 7W/G2+ MONITOR
Intercom menu

20
Recordings menu
Picture
20-02-2019 11-02-2019
20-02-2019 08-02-2019
17-02-2019 04-02-2019
15-02-2019 01-02-2019
12-02-2019 22-01-2019
18:12:23 20:27:25
12:27:22 11:17:10
16:41:33 15:43:50
09:55:42 22:11:00
23:00:00 08:07:06
01 / 03
Displays the list of pictures saved on the monitor or on the SD card, if installed. The icon allows us to access
the video recordings stored on the SD card, and can return to the list of images using the icon. The number
of recordings per page is 10, showing the number of pages at the top of the screen. Use the scroll arrows to
access the rest of the pages.
The symbol indicates that the recording has not been displayed.
Use icon to return to the main menu.
To delete one or more recordings from the list, use the icon. Click on the recordings you want to delete or use
the icon to select them all. Confirm your selection using the icon: a warning screen will ask for your final
confirmation.
Use icon to return to the recordings list.
Picture
02-02-2222 02-02-2222
02-02-2222 02-02-2222
02-02-2222 02-02-2222
02-02-2222 02-02-2222
02-02-2222 02-02-2222
11:17:10 11:17:10
11:17:10 11:17:10
11:17:10 11:17:10
11:17:10 11:17:10
11:17:10 11:17:10
01 / 03
SOUL S5110/ART 7W VIDEO INTERCOM KIT
ART 7W/G2+ MONITOR