GoMax Electronics SW-5004IZ User manual

4x1 HDMI 2.0b Switch
UserManual
rev: 190527
Made in Taiwan
S
W
-5004IZ
Safety and Notice
The SW-5004IZ 4x1 HDMI 2.0b Switch has been tested for conformance to safety regulations and
requirements, and has been certified for international use. However, like all electronic equipments,
the SW-5004IZ should be used with care. Please read and follow the safety instructions to protect
yourself from possible injury and to minimize the risk of damage to the unit.
●Follow all instructions and warnings marked on this unit.
●Do not attempt to service this unit yourself, except where explained in this manual.
●Provide proper ventilation and air circulation and do not use near water.
●Keep objects that might damage the device and assure that the placement of this unit is on a
stable surface.
●Use only the power adapter and power cords and connection cables designed for this unit.
●Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device
before cleaning.
TABLE OF CONTENTS
4x1 HDMI 2.0b Switch....................................................................................... 1 
INTRODUCTION................................................................................................................... 1 
FEATURES........................................................................................................................... 1 
PACKAGE CONTENTS ........................................................................................................ 1 
SPECIFICATIONS ................................................................................................................ 2 
PANEL DESCRIPTIONS ...................................................................................................... 3 
CONNECTION DIAGRAM .................................................................................................... 4 
OPERATION APPROACH.................................................................................................... 5 
WARRANTY.......................................................................................................................... 6 

1
INTRODUCTION
The SW-5004IZ 4x1 HDMI 2.0b Switch provides easy switching among 4 HDMI sources to
your high definition display including HDMI equipped or DVI enable monitors. Full digital and
high quality video/audio from any of these 4 sources can perfectly be transmitted to the
connected high definition monitor via IR remote control and front panel button. With HDCP
support, up to four HDMI/DVI sources such as PS4, DVD players, camcorders, or set-top boxes
can seamlessly & simultaneously connected to this SW-5004IZ.
FEATURES
 HDMI 2.0b compliant
 Supports 4K2K@60 4:4:4 8bits and 8K4K@30 4:2:0 8bits
 Supports HDR* which is 4K2K@60 4:2:0 10bits**
 HDCP 2.2 and 1.4 compliant
 Wide frequency range: 25MHz~600MHz
 Video bandwidth: 18Gbps
 Supports xvYCC, x.v.Color & Deep color
 The switcher can select any HDMI input by front panel button & IR remote control
 Handy front panel button to switch any four HDMI/DVI sources
 Front Panel LED indictors
 Equalization on input ports and pre-emphasis on output port
 Easy installation
PACKAGE CONTENTS
1x SW-5004IZ
1x 5V DC power adapter
1x User Manual
1x IR Remote Control (15 keys)
* HDR = High Dynamic Range.
** The video bandwidth of 4K2K@60 4:2:0 10bits (HDR) is 384MHz, and the 4K2K@60 4:4:4 8bits
is 594MHz
2
SPECIFICATIONS
Model Name SW-5004IZ
Technical
Role of usage 4x1 switch
HDMI compliance HDMI 2.0b
HDCP compliance HDCP 2.2
Video bandwidth Single-link 600MHz [18Gbps]
Video Support HDR 4K2K@60 (4:2:0 10bits) / 4K2K@60 (4:4:4 8bits) / 8K4K@30 (4:2:0
8bits)
Audio Support DTS-HD Master Audio, Dolby TrueHD Dolby Digital
DTS, DVD-Audio, LPCM, SACD, MPCM
Input TMDS Signal 1.2 volts (peak-to-peak)
Input DDC signal 5 volts (peal-to-peak)
ESD Protection Human body model
—
±15kV [ai
r
-gap discharge] & ±8kV [contact discharge]
Input 4x HDMI + 1x micro-USB
Output 1x HDMI
IR Remote Control Electro-optical characteristics: π= 25° / Carrier frequency: 38kHz
HDMI connector Type A [19-pin female]
USB connecto
r
Micro USB
Mechanical
Housing Metal enclosure
Dimensions
[L x W x H]
Model 182 x 68 x 23mm [7.1" x 2.7" x 0.9"]
Package 263 x 170 x 97mm [10.3" x 6.7" x 3.8"]
Carton 512 x 364 x 288mm [1'7" x 1.2' x 11.3"]
Weight
Model 298g [10.5oz]
Package 627g [1.4lbs]
Fixedness Wall-mounting case
Power supply 5V 1
A
DC
Power consumption 3 Watts [max]
Operation temperature 0~40°C [32~104°F]
Storage temperature -20~60°C [-4~140°F]
Relative humidity 20~90% RH [no condensation]

3
PANEL DESCRIPTIONS
Front Panel
1. Micro-USB: for firmware udpate
2. IR Sensor: IR sensor for receiving the IR commands from IR remote
3. Power Status: Power indicator LED
4. Output Status: Output signal indicator LED
5. Selected Source Status LED: When users use port channel push button, the indicator LED will show
the selected source. (from the left to the right is input 1, input 2, input 3, input 4)
6. Channel Push Button: Select input channel
Rear Panel
7. HDMI OUT: HDMI output
8.
HDMI Input 1~4: HDMI inputs (from the left to the right is input 1, input 2, input 3, input 4)
9. +5V DC: Connect to a 5V DC power supply
4
CONNECTION DIAGRAM

5
OPERATION APPROACH
Method A: IR Remote Control
Function Key Function Description
POWER Video Mute
Switch from the selected input to the next
input channel
Switch from the selected input back to the
prior input channel
SOURCE SELECT 1 Select HDMI INPUT 1 to be the input source
SOURCE SELECT 2 Select HDMI INPUT 2 to be the input source
SOURCE SELECT 3 Select HDMI INPUT 3 to be the input source
SOURCE SELECT 4 Select HDMI INPUT 4 to be the input source
F1 Auto detection
F2 Auto switch to next input channel every 30
seconds
6
WARRANTY
The SELLER warrants the SW-5004IZ 4x1 HDMI 2.0b Switch free from defects in the material and
workmanship for 1 year from the date of purchase from the SELLER or an authorized dealer. Should this
product fail to be in good working order within 1 year warranty period, The SELLER, at its option, repair or
replace the unit, provided that the unit has not been subjected to accident, disaster, abuse or any
unauthorized modifications including static discharge and power surge. This warranty is offered by the
SELLER for its BUYER with direct transaction only. This warranty is void if the warranty seal on the metal
housing is broken.
Unit that fails under conditions other than those covered will be repaired at the current price of parts
and labor in effect at the time of repair. Such repairs are warranted for 90 days from the day of reshipment
to the BUYER. If the unit is delivered by mail, customers agree to insure the unit or assume the risk of loss
or damage in transit. Under no circumstances will a unit be accepted without a return authorization
number.
The warranty is in lieu of all other warranties expressed or implied, including without limitations, any
other implied warranty or fitness or merchantability for any particular purpose, all of which are expressly
disclaimed.
Proof of sale may be required in order to claim warranty. Customers outside Taiwan are responsible
for shipping charges to and from the SELLER. Cables and power adapters are limited to a 30 day
warranty and must be free from any markings, scratches, and neatly coiled.
The content of this manual has been carefully checked and is believed to be accurate. However, The
SELLER assumes no responsibility for any inaccuracies that may be contained in this manual. The
SELLER will NOT be liable for direct, indirect, incidental, special, or consequential damages resulting
from any defect or omission in this manual, even if advised of the possibility of such damages. Also, the
technical information contained herein regarding the SW-5004IZ features and specifications is
subject to change without further notice.