GOODEE YG620 User manual

MANUAL

[email protected]

1.Safety notice:
1.1. Please read manual carefully before you use the projector.
1.2.To ensure stable power supply, please use national standard power cable and power
cord with grounding.
1.3. Please use the same power voltage as the projector marked.
1.4. Please do not open the projector, otherwise the supplier will not afford warranty
service.
1.5.Do not look directly at the projector lens while the machine is working to avoid
damage to your eyes.
1.6.To avoid clog of the projector vent, please do not coverit with cloth, carpet and other
materials.
1.7. This projector is not waterproof, to prevent power breakdown, please keep it from
water inluding other liquid and humid environment.
1.8, Tum off and cut off the power supply if do not use this project for a long time.
1.9.Use the originally foam or other unit-shock material to protect projector,f you need
transport this projector.
1.10 Ifyou find the projector has problems,please contact with the supplierdo not repair
by yourself.

2.Interface introduction:
Manual focus
IR receiver
A v < > oK D
UP Down Left Right OK Retun
SVOUT— —USBinput slot
HDMI 2 input slot — — AV input slot
HDMI 1 input slot — — Earphone slot
VGA input slot — — Micro SD card slot
0 o200 R
Power receiver
switch
Power
input
Keystone

3.Remote control i
Power——|
FR
ntroduction
up—
Play/Pause
T
@ | @ Mue
FF
Left
OK———
Right
Down
Signal Source Return
Vol-
Vol +
Menu/
shortcut
“NOTE
|
1.Toavoid power shortage, please do not mixed use the old and new battery.
2Toavoid battery leakage corrosion, if do nat use remote controlfor a g time,please take the battery out.

4.Media connection
4.1. Multimedia connection
Connect the USB/Micro SD drive with the content to the projector USB/Micro SD port,
select “MultiMedia”, you can select movies, music, photo, text on the list.
] P WMA/OGG/AACFLAC/APEIVAY
Muit- [ Photo support JPEG/BMP/P
SGR/AVMKY/FLVFL)
VOB/MPG/RMVB/RM
T
NAPANPG)
media | Video su port
Input Source:
>
Input Source Setting. B

4.2.VGA connection
VGA slot could connect to computer and all the device with VGA slot. As connected,
choose the “Input Source-VGA” .
fl[[
MultiMedia Input Source ~ Setting

4.3. HDMI connection
HDMI slot could connect to computer and all the device with HDMI slot. As connected,
choose the “Input Source-HDMI”.
MultiMedia Input Source Setting
Support files:
576P, 480P, 720P, 1080P, 640*480, 800*600, 1024*768, 1280*1024,
1280*720, 1440*900, 1920*1080, 1366*768, 1280*800, 1440*960,
1600*1200, 16801050

4.4. AV video equipment connection
Use 3in 1 video convert cable, connect projector AV slot, as the picture below show, as
connected, choose the “Input Source-AV".
Support format: NTSC / PAL
MultiMedia Input Source ~ Setting

4.53.5mm audio device connection
Could connect 3.5mm earphone and speaker equipment.

5.Projector connection introduction
5.1 Connection introduction
“Could connect multi-device and applications, |

6.Focus adjustment
Put the projector vertical to the projector screen or white wall, adjust the focus roller
according to your picture or video, until the them clearly enough.
P
FOcus
7.Keystone correction
In sometimes, the images which projector on the wall is a little twisted as aladder, we
could take a keystone to adjust it. The keystone technology is the method to get the image
normalization by digital or optical. technology.
-
KEYSTONE

8.Picture/Syetem setting
Open the home page-“Setting” you can set up the projection mode, image scaling, aspect
ratio, picture mode of the projector from Picture Setting. you can set up the OSD
language, software update, factory restore, auto sleep of the projector from the System
setting.
MultiMedia
Picture Setting
System Setting
(o]
050 Language ~Soituare Up.
Projection.. Image scaing _ Aspect Ratio
Input Source Setting
e Mode
(=]
Factory Reset. Auto Sleep
9.0ther instruction
9.1 Lifting way
Size of screw
hole : M4*8
/

9.2 Adjustable foot pad
Gently lft the projector body, press the "PUSH" button at the bottom of the body to adjust
the height of the foot mat.
9.3 Dust removal from anti-dust Mesh
In order to keep the air circulating,please remove the air inlet regularly to clean the
dust:Notefor your safety,pls shut the power off before operation.
left side of the machine back side of the machine
TN

10.Echnology features
10.1 Basic parameters
Imaging Technology TFT LD
Resolution 192011080
Lght =)
Operation Mode Manual operation
Projection Distance 55 6M
Screen Size 50300 Inches
Aspect Ratio 69
Projecton ratio 1561
Keystone Manual coections 5
Power Input 100V-240V-50/60Hz
Integrated watt 400
npat HD*2/US82 ONGAMICTOSD/AY
Output Earphone/sV OUT
Speater B
Uit Sze 30257 108mm
Net Weight 261kg
10.2 Projector distance & size

Contact Us:
If you have any suggestions or if you run into any
problems,please feel free to contact our support at
X [email protected]