Goodmans 363307 User manual

此页不打印，仅展示说明书尺寸。
说明书尺寸: 120 x 210mm
Instruction manual size: 120 x 210mm
This page is not printed, only shows the size
of the manual.

DAB DIGITAL / FM RADIO
WITH BLUETOOTH
USER MANUAL
MODEL: 363307

Welcome
Your DAB Digital / FM Radio with Bluetooth
Quick Setup
Operation
1
2
3
4
2.1
2.3
2.2
2.4
In the Box
Position of DAB Digital / FM Radio with Bluetooth
Adjusting The Aerial
Mains Power
2.6
2.5
2.7
Top View
Rear View
Front View
4.1
4.3
4.2
4.4
Full Scan
Recalling Stored Stations
Stations Information on DAB Mode
Storing Stations
4.5 Pruning
3.1
3.2
Connecting The Power
DAB Operation
4.6
4.8
4.7
4.9
Auto Scan
Storing Stations
Recalling a Stored Stations
Manual Scan
4.10 Station Information on FM Mode
FM Operation
Using Your DAB Digital / FM Radio with Bluetooth
3.3 Pairing with a Bluetooth Device

4.11
4.13
4.12
4.14
Setting The Time/Date
Factory Reset/ Resetting the Radio
Alarm Setting
System Version
4.15 Turn off the Alarm
4.17
4.16
4.18
Sleep Setting
Language Setting
Turn off the Alarm when Sounding
4.19 FM Scan Setting
4.20 Snooze Function
System Setting
Troubleshooting5
Technical Specifications6
EC Declaration7

Welcome1
Thank you for choosing this Goodmans product. We have been
making electrical products for the British people for over 90 years.
Each of our products have been carefully designed to be great at
what they do and this one is no exception. We hope you enjoy your
new Goodmans DAB Digital / FM Radio with Bluetooth.
Carefully remove your DAB Digital / FM Radio with Bluetooth from the
box.
Inside the box you will find:
●1 x DAB Digital / FM Radio with Bluetooth
Your DAB Digital / FM Radio with Bluetooth2
In the Box2.1
●1 x Power Adaptor
●Quick Start Guide
●Instruction Manual
●Safety & Guarantee Leaflet
●Where it is exposed to direct sunlight.
●Where it is close to heat radiating sources.
●Where the humidity is high and ventilation is poor.
●Where it is dusty.
Your DAB Digital / FM Radio with Bluetooth uses a DC 5V 1A power
adaptor.
Please ensure that your mains supply is compatible before use.
Mains Power2.2
Fully extend the aerial to ensure good reception in both DAB and FM
Radio modes. It may be necessary to alter the position of the
DAB Digital / FM Radio with Bluetooth and/or the aerial to achieve the
best signal.
Adjusting the Aerial2.4
Place on a flat, stable surface that is not subject to vibrations.
Avoid the following locations:
Position Of DAB Digital / FM Radio with Bluetooth2.3

Front View2.5
Speaker
LCD Display
Press the button once to switch On, press again to enter standby
mode.
Hold the button to turn Off.
Power Button
Press to view station information.
Press and hold to display menu options.
MENU/ INFO
Press the button to scan DAB and FM stations.
SCAN
To review station list(DAB) or previous station(FM) or previous
track(BT) .
Previous
Press to switch between DAB / FM radio / Bluetooth modes.
MODE
Press the alarm button enter to alarm setting.
ALARM
Press and hold to save a station as a preset,
or press to release to recall a saved preset station.
PRESET

Top View2.6
Handle
Rear View2.7
To review station list(DAB) or next station(FM) or next track(BT) .
Next
Transfer the VOL+ or VOL- knob to increase/decrease the volume.
Press the button once to confirm current operation
Hold the button will disconnect under Bluetooth mode.
OK / VOL+ / VOL-
Antenna
DC 5V IN Port
Headphone Socket
Battery Compartment
Insert 4×1.5V C batteries into battery
compartment (4×1.5V C batteries not included).
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.

1. Insert the power adaptor to the DC 5V IN port port on your DAB
Digital / FM Radio with Bluetooth, or insert 4 x 1.5V C batteries in
to battery compartment (4 x 1.5 C batteries not included).
2. Insert the power adaptor into a suitable mains socket.
Press the Power button on your DAB Digital / FM Radio with
Bluetooth.
Quick Setup3
Connecting The Power3.1
1. Extend the telescopic antenna for the best reception possible.
2. Make sure the DAB Digital / FM Radio with Bluetooth has been
switched ON.
When you power ON the radio again after it has been switched off,
it will automatically tune into the same station (DAB or FM or BT)
that was last selected.
3.
Using Your DAB Digital / FM Radio with Bluetooth3.2
1. Make sure the DAB Digital / FM Radio with Bluetooth has been
switched ON. Press the MODE button to select Bluetooth mode,
and the LCD display will show "Bluetooth Pairing".
2. Enable Bluetooth on your Smartphone and search for Bluetooth
connections, selet "GOODMANS DAB" from the list of devices. You
are asked for a pass code enter "0000".
3. When successfully paired, the LCD display will show "Bluetooth
Paired Pause".
4. Once you have paired the DAB Digital / FM Radio with Bluetooth
with a smartphone or Bluetooth devices, it will remember this
devices and will pair automatically when the device's Bluetooth is
activated and in range, you do not need to re-pair any previousely
connected devices under Bluetooth mode.
5. The DAB Digital / FM Radio with Bluetooth will attempt to
automatically connect to the last device it was paired with if
Bluetooth mode is turned on. If you want to pair it with a new device,
please hold the OK / VOL+ / VOL- button until the LCD display
show "Bluetooth Pairing" and then use your new device to search
and select the pairing name.
Pairing with a Bluetooth Device3.3
4. Press the Mode button to switch between DAB / FM / BT modes.
5. Transfer the VOL+ and VOL- knob to increase / decrease
the volume.
6. During scanning the screen will display the progress of the scan,
and the amount of radio stations that have been found so far. Once
the scan has finished, the radio will select the first alphanumeric
station.
7. Hold the power button to turn off the DAB Digital / FM Radio with
Bluetooth.
Note: Press the power button once will go to standby mode.

When you press the Power button to turn on the DAB Digital / FM
Radio with Bluetooth again after a switch off. It will automatically tune
into the same station (DAB / FM / BT) that was last selected.
Operation4
DAB Operation
1. Extend the telescopic antenna for the best reception possible.
2. Press the Power button to power up the DAB Digital / FM Radio with
Bluetooth, and select DAB mode.
3. Press the Scan button will automatically commence. The unit will
search for all available DAB stations.
Full Scan4.1
1. You can store up to 10 DAB+ stations to the memory presets for
quick and easy recall of your favorite stations.
2. To store a preset, you must first be listening to the station that you
would like to save. Press and hold the PRESET button. The display
will show “Preset Store<#:(Empty)>”. If a station is already stored.
The display will show ”<#: Station name>”.
1. Press the PRESET button and press the Previous / Next button to
select your desired preset station’s number.
2. Press the OK button to recall a preset station number.
3. Press the Previous / Next buttons to select the preset station
number 1-10.
4. To save to the selected preset station number, press the OK button.
The display will then show” Preset# stored”.
Storing Stations4.2
Once you have saved a station to one of the preset buttons, you can:
Recalling Stored Stations4.3
Press the INFO/MENU button repeatedly to show the different
program information.
Signal Strength: Displays a signal bar with the strength of the
current station.
Bit Error Rate(BER): Provides details of the signal error rate.
Channel and Frequency: Displays the station’s transmission channel
number and frequency.
PTY (Program Type): Shows the type and description of the program
provided by the DAB station.
Stations Information on DAB Mode4.4

1. You can store up to 10 FM stations to the memory presets for quick
and easy recall of your favourite stations.
2. To store a preset, you must first be listening to the station that you
would like to save. Press and hold the PRESET button. The display
will show “Preset store <#:(Empty)>”. If a station is already stored,
the display will show “<#: Station frequency>”.
3. Press the Previous / Next button to select the preset station
number 1-10.
4. To save to the selected preset station number, press the OK button.
The display will then show “Preset # stored”.
Storing Stations4.8
1. To search for an FM station, press Scan. This will start scanning the
frequency band.
2. Once a station has been found. the scanning will stop automatically.
If no station is found, then the tuning will stop one it has cycled
through the entire FM band (87.5-108 MHz).
Auto Scan4.6
To search FM stations manually, simply press the Previous / Next
buttons repeatedly until your desired frequency is reached.
Manual Scan4.7
In order to switch the DAB Digital / FM Radio with Bluetooth from DAB
to FM mode, press the MODE button.
FM operation
1. When the DAB Digital / FM Radio with Bluetooth has performed a
Scan in several locations you may find there are stored stations
that you can no longer receive. This function automatically removes
them from the stored station list.
Pruning4.5
Time and Date: Displays the time and date information provided by
the broadcaster.
Dynamic Label Segment(DLS): Displays scrolling text information
supplied by the broadcaster.
Bit Rate: The data rate of which the signal is being transmitted.
2. Press and hold the MENU/INFO button to enter Prune, then press
the OK to confirm and select YES then press OK button to remove.

Once you saved a station to one of the preset buttons, you can:
1. Press the PRESET button and press the Previous / Next buttons to
select your desired preset station’s number.
2. Press the OK button to recall a preset station number.
Recalling a Stored Stations4.9
Press the MENU/INFO button repeatedly to show the different
program information.
Station Information on FM Mode4.10
1. Press the OK button, the hour digitals will flash.
2. Press the Previous / Next buttons to set the hour correctly.
3. Press the OK button to confirm.
4. Repeat the last two steps to set the minutes, the Year, Month,
Date.
Setting The Time/Date4.11
You can check the software version number.
System Version4.12
With the unit is turned on press and hold the MENU/INFO button.
This will open the “Set Menu”.
Press the Previous / Next buttons to select your desired Sub-option
between:
System Settings
Program Type: Displays a description of the type of program
provided by the broadcaster.
Signal Strength: Displays a signal bar with the strength of the
current station.
Time and Date: Displays the time and the date.
Frequency: Displays the station’s transmission frequency.
Radio Text: Displays scrolling test information supplied by the
broadcaster.

1. Press the Alarm button to use Alarm 1 or press Next to access
Alarm 2.
Alarm Setting4.14
2. Press the OK button so the word " ON " is flashing and press OK
button again to confirm.
3. The hour digits for the alarm will flash, press the Provious or Next
to change the hour and press the OK button to confirm.
Resetting the radio will delete all the tuned DAB stations and all the
preset memory stations in FM and DAB modes. To reset the radio:
1. Press and hold the MENU/INFO button.
2. Press the Next button repeatedly until “Factory Reset” is
displayed on the screen.
3. Press the OK button and the display will show “Factory Reset?”,
Press the Next button to select "YES".
4. Press the OK button again, this will reset the radio.
Factory Reset/ Resetting the Radio4.13
Note: You can press the MENU/INFO button to get back last one
step when in the process of setting the alarm.
4. Press the Previous or Next button to change the minute and
press the OK button to confirm.
5. Press the Previous or Next button to change the volume and
press the OK button to confirm.
6. Press the Previous or Next button to change between
Alarm-DAB-FM and press the OK button to confirm.
7. Press the Previous or Next button to select between
ONCE-DAILY-WEEKENDS and press the OK button to confirm.
8. To set the Alarm 2, follow the Alarm 1 instructions.
Note: The alarm will keep ringing for one hour if you do not turn it
off when it is sounding.
To turn off the alarm, press the Next button so the word “OFF” is
flashing and press OK button. The alarm is now OFF.
Turn off the Alarm4.15
Press the Power button to turn off the alarm when sounding.
Turn off the Alarm when Sounding4.16

1. When the alarm sounds, press the OK button to delay the alarm
for another 9 mins. The radio will go to Standby mode.
2. You can press Power button to stop the Snooze function and go
to the operation mode before the alarms rings.
Snooze Function4.20
1. Press and hold the Alarm button to set Sleep.
2. Press the Previous / Next button to select either
OFF-120-90-60-45-30-15-5 minutes.
3. Press the OK button to confirm your selection.
Sleep Setting4.17
Press the OK button to select the language you want and press the
OK button to confirm.
Language Setting4.18
4.19
Turn on the unit and state at FM mode, Press and hold the
MENU/INFO button, press the next button into FM scan setting, to
select Only or All. If select Only, the radio only scans the strong
signal station and play. If select All, the radio will also scan the
weak signal station and play.
FM Scan Setting

Operation5
No sound. The station is not tuned in. Fine tune
the station.
The volume is set to a low position.
Increase the volume.
FM: Static sound
DAB+: Burbling/
Intermittent cut-out.
Signal reception is too low.
Adjust the aerial or move the unit to a
stronger signal location.
Rescan stations.
Problem What to do
Sound is distorted. The volume is too high. Adjust the
volume control.
Desired station not
found short.
Weak signal. Use the manual tune
function.
Display shows
“No Service”.
There is no DAB+ coverage in your
area, or poor reception. Adjust the
position of the aerial, or move the unit
to a stronger signal location.
Display is blank. This may occur if the broadcaster
changes the label of a service or
removes a label while tuned. The unit
will try to retune or perform a scan.
Technical Specifications6
Power Supply 100-240V~ 50/60Hz
Adaptor: DC 5V,1000mA
4 X 1.5V C Batteries (not included)
Model Number 363307
Speaker Output
Power
2 x 3W
Frequency Range DAB 174—240 MHz
FM 87.5—108 MHz
Pre-sets FM mode: 10
DAB mode: 10
Dimensions 256mm(L) x 90mm(W) x 140mm(H)

Information on Waste Disposal for Consumers of
Electrical & Electronic Equipment
This mark on a product and/or accompanying documents
indicates that when it is to be disposed of, it must be
treated as Waste Electrical & Electronic Equipment (WEEE).
Any WEEE marked waste products must not be mixed with
general household waste, but kept separate for the treatment,
recovery and recycling of the materials used.
For proper treatment, recovery and recycling; please take all
WEEE marked waste to your Local Authority Civic waste site,
where it will be accepted free of charge.
If all consumers dispose of Waste Electrical & Electronic
Equipment correctly, they will be helping to save valuable
resources and preventing any potential negative effects upon
human health and the environment of any hazardous materials
that the waste may contain.
Imported by B&M Retail Ltd., Dakota Drive, Liverpool, L24 8RJ, UK
Made in China
EC Declaration7
This product is intended for use within the UK.
This appliance complies with the below listed EU directives.
2014/30/EU Electromagnetic Compatibility Directive
2014/35/EU Low Voltage Directive
2011/65/EU Restriction of Hazardous Substances Directive
2009/125/EC Eco-design Directive
2014/53/EU Radio Equipment Directive
is a trademark on a registered trademark of Bluetooth
SIG Inc.
The complete declaration of conformity is available upon request for
relevant enquiries