Goodwe Ezlink3000 User manual
(Ezlink3000)
Quick Installation Guide
Smart Dongle
V1.1-2022-12-30
1
Quick Installation Guide V1.1-2022-12-30
Inverter
Inverter
Inverter
Inverter
Grid
Grid
Ezlink
Ezlink
PV String
PV String
PV String
PV String
SolarGo app SEMS Portal app
WiFi< 15m
LAN< 100m[1]
WiFi< 15m
LAN< 100m[1]
Bluetooth< 10m
Router
Router
Server
Server
House
loads
House loads
[1] LAN: Optional.
Applications
01
Single Inverter
Multiple Inverters
PAR
PAR
Bluetooth< 10m
SolarGo app SEMS Portal app
2
Quick Installation Guide V1.1-2022-12-30
4
21
4
3
5
3
2
4
1
3
Installing the Dongle
1 2
1
2
21
4
3
5
: Optional. Only for LAN function.
1 2 4
3
Packing List
Installation
02
Ezlink *1 Unlock tool *1 User manual *1
(optional)
Waterproof gland
& network cable *1
3
Quick Installation Guide V1.1-2022-12-30
RJ45 Connector:
1.White & Orange
2.Orange
3.White & Green
4.Blue
5.White & Blue
6.Green
7.White & Brown
8.Brown
USB
Communication
Port of the Inverter
5
Step 1 Power on the inverter.
Step 2 Power on the router.
Step 3 Check communication status of the Ezlink through indicators.
Note: Check the indicators on the Ezlink and the inverter to conrm the communication
status of the device.
Indicator/Silkscreen Color Status Description
Blue Blink The Ezlink is working properly.
OFF The inverter is powered o.
Green
ON The Ezlink is connected to the server.
Blink 2 The Ezlink is not connected to the router.
Blink 4 The router is not connect to the internet.
RELOAD - -
Short press to restart the Ezlink.
Long press for 5 seconds to restore factory
settings.
Power On
03
4
Quick Installation Guide V1.1-2022-12-30
Step 1 Download and install SolarGo app.
The UI may be dierent due to the app version
upgrade. Scan the QR code for latest SolarGo app user
manual.
SolarGo App
Parallel Inverter System
Solution User Manual
Step 2 Connect the app and the device.
Commissioning via SolarGo App
04
1
2
3
Step 3 (Optional) When multiple inverters are parallel connected,
scan the QR code or click Parallel Inverter System Solution User
Manual for more details.
Find CCM-BLE*.
* is the last eight digits of the inverter
serial number.
When multiple inverters are
connected, the serial number of
the inverter connected to the smart
dongle is selected.
SolarGo User Manual
5
Quick Installation Guide V1.1-2022-12-30
Step 4 Set communication settings of the device.
• The interface may dier depending on the communication method.
• Make sure that the WiFi RSSI value is higher than -60, -50 or higher is recommended.
When the RSSI value is less than -60, you should move the router closer to the device,
remove the obstacle, or add a repeater to improve the signal strength.
5
4
6
Quick Installation Guide V1.1-2022-12-30
2
4
5
7
8
3
6
1
Step 1 Prepare a new device before replacing the old Ezlink.
Step 2 Remove the Ezlink using the Unlock Tool.
Step 3 Install the new device.
Step 4 Refer to the Quick Installation Guide to congure the new device.
Perform the next steps only when you need
to remove LAN.
Device Replacement
05
No. Problem Solutions
1Cannot nd CCM-
BLE**
1. Make sure that the inverter is powered on and the Ezlink
device is connected properly.
2. Make sure that the smart device is within the
communication range of the Ezlink device.
3. Restart the inverter or short press to restart the Ezlink.
2Unable to connect to
CCM-BLE**
1. Make sure that no other smart device is connected to
CCM-BLE**.
2. Restart the inverter or short press to restart the Ezlink,
then reconnect CCM-BLE**.
3Indicator double
blink
1. Make sure that the router is powered on.
2. Make sure that the LAN cable is connected tightly.
Troubleshooting06
No. Name Description
1 WiFi Network Select WiFi based on the actual connecting.
2 Password WiFi password for the actual connected network.
3 DHCP
• Enable DHCP when the router is in dynamic IP mode.
• Disable DHCP when a switch is used or when the router is
in static IP mode.
4 IP Address
• Do not congure the parameters when DHCP is enabled.
• Congure the parameters according to the router or
switch information when DHCP is disabled.
5 Subnet Mask
6 Gateway Address
7 DNS Server
7
Quick Installation Guide V1.1-2022-12-30
Model Ezlink3000
General
Parameters
Connection Interface USB
Ethernet Interface (Optional) 10/100Mbps self-adaption,
Communcation distance ≤100m
Bluetooth Bluetooth 5.1
Installation Plug-and-play
Indicator LED Indicator
Dimensions (W × H ×D mm) 153 × 49 × 32
Weight (g) 130
Ingress Protection Rating IP65
Power Consumption (W) ≤2
Operation Mode STA
Wireless
Parameters WiFi Communication 802.11 b/g/n(2.412GHz-2.484GHz)
Environment
Parameters
Operating Temperature Range (°C) -30 ~ +60
Storage Temperature Range (°C) -30 ~ +70
Relative Humidity (non-
condensing) 0-100%
Max. Operating Altitude (m) 4000
Technical Data
07
4Indicator
quadruple blink
1. Make sure that the cables are connected properly, and
the router can access the internet.
2. If the problem persists, contact the after sales service.
5 Indicator o Check whether the inverter is powered on.
SolarGo App SolarGo User
Manual
Parallel Inverter
System Solution
User Manual
SEMS Portal app
User Manual
SEMS Portal App
For more information, scan the QR codes below.
Website
GoodWe Technologies Co., Ltd.
No. 90 Zijin Rd., New District, Suzhou, 215011, China
www.goodwe.com
Other manuals for Ezlink3000
1
Table of contents
Other Goodwe Computer Hardware manuals
