Gorenje IQ641AC Guide

GLASS-CERAMIC INDUCTION BUILT-IN COKING HOB
INSTRUCTIONS FOR USE,
INSTALLATION AND CONNECTION
www.gorenje.com
MT IE GB

380354
Glass-ceramic hob is intended for use in
households.
Our products are packed in environment-friendly materials
which can be recycled, disposed of, or destroyed without
imposing any burden on the environment.
Instructions for use are intended for the user. They
describe the appliance and its operation. The instructions
apply to various types of appliances and may therefore
include description of functions that may not be available
on your appliance.
The appliance must be connected in compliance with the
instructions attached to it, as well as in compliance with
relevant regulations and standards. The connection may
only be performed by a qualified person.
The rating plate indicating the basic information on the
appliance is attached to the lower side of the hob.
When the cooking hob is built-in, a kitchen furniture
element that is higher than the hob can stand next to in on
one side, provided the kitchen element on the other side
of the hob is not higher than the hob level.
Instructions for use
Instructions for
connection
Rating plate
Fire risk protection
Dear customer!
Images used:
Important information
Tip
2

380354
IMPORTANT WARNINGS................................................................................................ 4
What you should pay attention to........................................................................................4
Connection and repair ................................................................................................................4
During use.........................................................................................................................................4
Temperature safety ......................................................................................................................5
Cooking-time limiter....................................................................................................................5
CONTROL UNIT.................................................................................................................7
Control panel................................................................................................................................... 7
Description .......................................................................................................................................8
USE...................................................................................................................................... 9
Getting used to it... .......................................................................................................................9
Pans....................................................................................................................................................10
OPERATION ..................................................................................................................... 12
Switching on the hob and setting the power.................................................................12
Detecting the pan........................................................................................................................12
Remaining heat indicator .........................................................................................................12
Automatic heat-up function .................................................................................................. 13
Boost function .............................................................................................................................. 13
Switching o the hob................................................................................................................ 14
Stand by mode..............................................................................................................................15
Child lock..........................................................................................................................................15
Stop/Go function ........................................................................................................................ 16
Cooking timer / Minute minder.............................................................................................17
Cooking timer function .............................................................................................................17
Switching o the timer/minute minder............................................................................ 18
COOKING.......................................................................................................................... 19
Healthy cooking........................................................................................................................... 19
Cooking settings.......................................................................................................................... 19
CLEANING AND MAINTENANCE................................................................................ 21
Cleaning ............................................................................................................................................21
TROUBLESHOOTING .................................................................................................... 23
General ............................................................................................................................................ 23
Troubleshooting table.............................................................................................................. 23
INSTALLATION INSTRUCTIONS................................................................................. 24
What you need to consider................................................................................................... 24
Electrical connection SIVK6, 7, 1 ......................................................................................... 29
Building in ......................................................................................................................................30
3
TABLE OF

380354
Induction cooking is extremely safe. Various safety devices
have been incorporated in the hob such as a residual heat
indicator and a cooking time limiter. There are nevertheless
a number of precautions you should take.
• This appliance may only be connected by a qualified
installer.
• Never open the casing. The casing may only be opened
by the service technician.
• Disconnect the electricity from the appliance before
starting any repair work Preferably unplug the
appliance, switch the (automatic) fuse(s) o or, in the
event of a permanent connection, set the switch in the
power supply lead to zero.
• Do not use the hob in temperatures below 5°C.
• This cooking appliance is designed for household use. It
is to be used for food preparation only.
• When you use the hob for the first time you will notice
a “new smell”. This is normal. If the kitchen is well
ventilated the smell will soon disappear.
• Remember that if the hob is used on a high setting
the heating time will be incredibly short. Do not leave
the hob unattended if you are using a zone on a high
setting.
• Ensure there is adequate ventilation while the hob is in
use. Keep all natural ventilation openings open
• Do not allow pans to boil dry. The hob itself is protected
against overheating but the pan will get very hot indeed
and could be damaged. The guarantee does not cover
any damage caused by a pan boiling dry.
• Do not use the cooking area as storage space
• Ensure that there is several centimetres clearance
between the hob and the contents of the drawer.
• Do not keep anything combustible in the drawer under
the hob.
• Make sure that flexes of electrical appliances, such as a
mixer, cannot touch the hot cooking zone.
• The zones heat up during use and stay hot for a while
afterwards. Keep young children away from the hob
during and immediately after cooking.
• Grease and oil are inflammable when overheated. Do
not stand too close to the pan. Should oil catch fire,
never try to extinguish the fire with water. Put a lid on
the pan immediately and switch the cooking zone o.
What you should pay
attention to
Connection and repair
During use
4
IMPORTANT WARNINGS

380354
• Never flambé food under the cooker hood. The high
flames could cause a fire, even if the cooker hood is
switched o.
• The ceramic top is extremely strong, but not
unbreakable. A spice jar or pointed utensil falling on it,
for example, could cause it to break.
• Stop using the hob if a break or crack appears. Switch
the appliance o immediately, unplug it to avoid electric
shocks, and call the service department.
• Never put any metal objects such as baking trays,
biscuit tins, saucepan lids or cutlery on the cooking
zone. These can heat up extremely quickly and cause
burns.
• Keep magnetizable objects (credit cards, bank cards,
floppy disks, etc.) away from the appliance. We advise
anyone with a pacemaker to consult their cardiologist
before using an induction hob.
• Never use a pressure cleaner or steam cleaner to clean
the hob.
• This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person
responsible for their safety.
• As soon as you remove the pan from the hob, the
cooking zone automatically stops. Accustom yourself
to stop the cooking zone or hob manually to avoid
unintended switching on of the induction hob.
• A small object like a pan that is too small (diameter of
bottom smaller than 12 cm), a fork or a knife will not be
recognised by the appliance. The display continues to
flash and the hob will not switch on.
• The appliance is not intended to be operated by means
of an external timer or separate remote-control system.
• A sensor continuously measures the temperature of
certain parts of the hob. Every cooking zone is equipped
with a sensor that measures the temperature of the
bottom of the pan to avoid any risk of overheating when
a pan boils dry. In case of temperatures rising too high,
the power is reduced automatically.
The cooking-time limiter is a safety function of your
cooking appliance. It will operate if you forget to switch
o your hob.
Depending on the setting you have chosen, the cooking
time will be limited as follows:
Temperature safety
Cooking-time limiter
5

380354
Setting The cooking zone switches
automatically o after:
012 hours
18,5 hours
26,5 hours
35 hours
44 hours
53,5 hours
63 hours
72,5 hours
82 hours
91,5 hours
u 2 hours
U 2 hours
The cooking-time limiter switches the cooking zones o if
the time in the table has elapsed.
Setting The cooking zone switches
automatically to setting 9 after:
boost (P) 10 minutes
The symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it shall be handed over to
the applicable collection point for the recycling of
electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent
potential negative consequences for the environment
and human health, which could otherwise be caused by
inappropriate waste handling of thisproduct. For more
detailed information about recycling of this product,
please contact your local city office, your household
waste disposal service or the shop where you purchased
the product.
6

The number of cooking zones depends on the appliance model.
380354
1. IQ - IQcook system
(Controls are described in the separately attached instructions for use)
---------------------------------------------------
2. Hotplate power control
a) decrease
b) increase
3. P - Power boost
4. Child lock
5. Cooking hob ON/OFF button
6. STOP/GO control button
7. Clock setting (+/-)
7
CONTROL UNIT
Control panel

INDUCTION
P
INDUCTION
P
INDUCTION
P
INDUCTION
P
TIMER
380354
1. Cooking zone Φ145mm; 2,2kW
2. Cooking zone Φ180mm; 3,0kW
3. Cooking zone Φ210mm; 3,7kW
4. Cooking zone Φ180mm; 3,0kW
8
Description

380354
Using touch sensors
The touch sensors only react to the light pressure of a
fingertip.
You do not have to apply any pressure. Do not operate the
controls with any other objects. The hob will not switch on
when your pet walks over it.
Induction cooking
• Induction cooking is fast
- To start you will be surprised by the speed of
induction cooking. Especially at higher settings, foods
and liquids will boil very rapidly. It is best not to leave
pans unattended to avoid them boiling over or boiling
dry.
• The power will be adjusted
- In the case of induction cooking, it is only the part of
the zone on which the pan stands that is used. If you
use a small pan on a large zone, the power will be
adjusted to the diameter of the pan. The power will
thus be lower and it will take longer before the food in
the pan comes to the boil.
Grains of sand may cause scratches which cannot
be removed. Only put pans with a clean base on
the cooking surface and always pick pans up to
move them.
Do not use the hob as a worktop. Always keep
the lid on the pan when cooking, in order to avoid
energy loss.
No heat loss and cold handles
with induction cooking.
9
USE
Getting used to it...

380354
Induction cooking
Induction cooking hob heats the food using a magnetic
field. When a pan with ferromagnetic metal bottom is
placed on the hob, the magnetic field generates eddy
currents that heat up the pan.
Coil (1) in the induction hob (2)
generates magnetic field (3). When
a pan with ferromagnetic metal
bottom (4) is placed on the coil,
eddy currents are generated in the
pan bottom, which produce heat.
Simple
The electronic controls are accurate and easy to set. For
example, on the lowest setting you can melt chocolate
directly in the pan or cook ingredients that you would
normally heat in a bain-marie.
Fast
Thanks to the induction hob’s high power levels, bringing
food to the boil is very quick. Cooking food through takes
just as long as for other types of cooking.
Clean
The hob is easy to clean. Because the cooking zones do
not get any hotter than the pans themselves, food spills
cannot burn on.
Safe
The heat is generated in the pan itself. The glass top does
not get any warmer than the pan. This means that the
cooking zone is considerable cooler compared to that
from a Ceramic hob or a gasburner. Once a pan has been
taken away, the cooking zone cools down quickly.
Pans for induction cooking
Induction cooking requires a particular quality of pan.
Pans that have already been used for cooking on
a gas hob are no longer suitable for use on an
induction hob.
Only use pans that are suitable for electric and
induction cooking with:
• a thick base (minimum 2.25 mm)
• a flat base.
The best are pans with the ‘Class Induction’ quality
mark.
Pans
10

380354
Be careful with enamelled sheet-steel pans:
• the enamel may chip (the enamel comes loose
from the steel), if you switch the hob on at a high
setting when the pan is (too) dry;
• the base of the pan may warp - due, for example,
to overheating or to the use of too high a power
level.
Never use pans with a misshapen base! A hollow or
rounded base can interfere with the operation of the
overheating protection, so that the appliance becomes too
hot. This may lead to the glass top cracking and the pan
base melting. Damage arising from the use of unsuitable
pans or from boiling dry is excluded from the guarantee.
Minimum pan diameter
• The diameter of a pan must be at least 12 cm. You
will achieve the best results by using a pan with
the same diameter as the zone. If a pan is too
small the zone will not work.
Pressure cookers
• Induction cooking is very suitable for cooking in
pressure cookers. The cooking zone reacts very
quickly, and so the pressure cooker is quickly up
to pressure. As soon as you switch a cooking zone
off, the cooking process stops immediately.
Suitable Unsuitable
Special stainlesssteel pans Earthenware
Class Induction Stainless steel
Hard-wearing enamelled pans Porcelain
Enamelled cast-iron pans Copper
Plastic
Aluminium
You can check for yourself whether your pans are
suitable using a magnet. A pan is suitable if the
base of the pan is attracted by the magnet.
11

380354
The power has 9 settings. There is also a ‘boost’ setting,
which is indicated by the letter Pin the display.
1. Put a pan on a hotplate.
2 Touch the On/O button .
You will hear a short bleep and the display for each
hotplate will show 0. If no further action is taken within
the following 10 seconds, the hotplate will automatically
switch o.
3. Slide your finger from left to right over the slide control
and select the desired hotplate setting. The hob will
automatically start in the chosen setting (if it detects a
pan with adequate diameter).
Touching the slide control more to the right will
result in higher power setting (and touching it
more towards the left will result in reduced power
setting).
If the hob does not detect a ferrous pan after the cooking
power has been set, the pan detection symbol and the
selected power setting will flash alternately on the display,
while the hob remains cold. If an adequate ferrous pan
is not placed on the hotplate within 1 minute from the
commencement of flashing, the hotplate will automatically
switch o.
A hotplate that has been used intensively will retain heat
for several minutes after it has been switched o. A letter
Happears in the display as long as the relevant hotplate
is hot.
Switching on the hob
and setting the power
Detecting the pan
Remaining heat
indicator
12
OPERATION

380354
The automatic heat-up function temporarily increases the
power (setting ‘9.’) to heat the contents of the pan faster.
This function is available in all settings except the ‘Boost’
setting and setting ‘9.’
Switching on the automatic heat-up function
The hob is switched on and a pan has been placed on the
hotplate.
1. Touch the slide control of the selected hotplate with the
tip of your finger to the desired position, and keep the
finger pressed for about 3 seconds.
2. Letter Ais indicated in the display. If your power
selection is 4, the letter A and the setting 4 will
alternately flash on the display.
3. Attention! When the pan has reached the desired
temperature, the automatic heat-up function
automatically switches o and the hotplate continues at
the set power.
The table below shows the duration of the automatic heat-
up function for each power setting:
Setting 1 2 3 4 5 6 7 8
Seconds 40 72 120 176 256 432 120 192
Switching o the automatic heat-up function
The hob is switched on A and the power setting flash
alternately in the display.
1. Touch the slide control sensor to select the relevant
hotplate.
A dierent power setting is shown in the display and A
stops flashing. Or:
2. Select setting ‘9.’. Or:
3. Select the relevant hotplate by touching the slide
control sensor at the far left side. The display shows
setting ‘0.’, Astops flashing and the hotplate is switched
o.
The ‘Boost’ function is used to cook at maximum power
for a short period of time (maximum 10 minutes). The
power is reduced to setting 9 at the end of the maximum
boost time.
Switching on the boost function.
The hob is switched on and a pan is on the hotplate.
1. Touch the button of the relevant hotplate (you can
also use this button if power had been previously set).
2. The boost function is immediately active.
Automatic heat-up
function
Boost function
13

380354
Switching o the boost function
The boost function is switched on, and the display
indicates ‘P’.
1. Touch the slide control sensor at any position. The
display shows the selected power setting, the boost
function is switched o. Or:
2. Touch the leftmost end of the slide control sensor. The
display shows setting 0, and the hotplate is switched o.
• Two hotplates behind each other
- Two hotplates positioned behind each other influence
each other. The power is automatically distributed
when these hotplates are used at the same time. This
does not have any consequences up to setting 9.
Selecting the Boost setting for one of the hotplates,
however, automatically switches the other hotplate to
a lower setting.
- If one of the hotplates is set to boost and you want to
set the other zone to setting 9 or Boost, the hotplate
that is set to boost will automatically be switched to a
lower setting.
- Two hotplates that are beside each other do not
influence each other. You can set both hotplates to
Boost.
Switching o a particular hotplate
1. The hotplate is switched on. The display shows power
setting between 1 and 9, or P.
To switch o the hotplate slide your finger over the slide
control from right to left until the display shows setting 0.
Or:
2. Select setting 0 by touching the slide control sensor at
the foremost left point.
You will hear a bleep and the display will show 0. If all
hotplates are set to 0., the hob automatically switches
to stand-by mode (see also ‘Stand-by mode’).
Switching o all of the hotplates at the same time
The hob is in stand-by mode, or one or more of the
hotplates are active.
1. Briefly touch the On/O button to switch o all of
the hotplates at the same time.
You will hear a single bleep. No lights are illuminated.
The hotplate is now switched o.
Note
You can switch off the hob if the (child) lock is set
or the Stop/Go mode is active.
Switching o the hob
14

380354
Stand-by mode
In stand-by mode, the display for each hotplate shows 0..
The hob is switched o and can be left unattended. You
can switch to stand-by from 'O' mode, or by switching
o the individual hotplates (by setting them to 0.). In
stand-by mode, the hob automatically switches o if no
other buttons are touched within 10 seconds.
Switching the hob from 'O' to stand-by mode
1. Touch the On/O button .
You will hear a single beep and the display for each
hotplate will show 0. The red light to the right above the
On/O button is constantly illuminated.
2. You can start cooking in stand-by mode by touching the
slide control sensor of the desired hotplate.
You can secure the hob with the safety (child) lock. With
this setting, the hob cannot be switched on and the
hotplate settings cannot be changed.
Stand by mode
Child lock
Standard safety lock mode Child safety lock mode
The (standard) lock mode prevents
settings from being accidentally
changed.
The child lock mode prevents the hob from
being accidentally switched on.
All cooking settings remain active.. All of the hotplates and the cooking timers/
minute minders must be switched o.
Switch the hob to (standard) lock mode
One or more hotplates are active.
1. Touch and hold the .
Attention! All previously set cooking processes remain
active.
The red light to the right above the button and the
On/O button are constantly illuminated. All of the
buttons are inactive, except the button and the On/
O button .
2. Touch and hold the button to switch o lock mode
and unlock the control panel.
15

380354
Switching on the child lock
The hob is in stand-by mode. The display for each hotplate
shows 0..
1. Touch and hold the button to switch on the child
lock. The red light to the right above the button and
the On/O Button are constantly illuminated.
If no buttons are touched within 10 seconds, the cooking
zone will automatically switch o. The child lock remains
active. You can even switch o the hob.
Touch the button again within 10 seconds to switch o
the child lock and unlock the control panel.
You must wait 10 seconds before switching the hob on
again with the On/O button in order to switch o the
child lock.
Switch the hob to child lock mode before cleaning
it to prevent it from accidentally switching on.
Stop / Go
Use the Stop / Go function to 'pause' the whole hob for
10 minutes while cooking. The power for all of the cooking
zones is automatically switched o. This is convenient, for
example, if a pan boiled over and you want to clean the
hob. You can also leave the hob unattended for a short
period of time without losing any settings.
Switching the hob to Stop / Go mode
One or more cooking zones are active.
1. Touch the button once.
You will hear a single bleep is shown in the display for
each cooking zone and the red light to the right above
the button is constantly illuminated.
Any set cooking timers/minute minders stop.
All of the buttons are inactive except the , button,
the button and the On/O button .
If no buttons are touched within 10 minutes, all of the
active cooking zones are automatically switched o.
Stop/Go function
16

380354
1. Switching o Stop / Go mode
Press the button again within 10 minutes.
The hob continues with the settings that were set before
the Stop / Go.
A cooking timer can be set for each cooking zone. All of
the cooking timers can be used at the same time. The hob
also has a minute minder. Both the cooking timer and the
minute minder can be set to a maximum of 99 minutes.
Switching on the minute minder
1. Touch the On/O button to switch the hob on.
2. To set the minute minder touch simultaneously both the
(-/+) buttons until the dot ».« (located between buttons
-/+) is fully illuminated.
3. Use (+) or (-) buttons to set the desired time. First set
minutes by pressing the (+) button until the value 9.00,
then the clock switches to setting hours and minutes
(0.10). Symbol (min) is illuminated.
a. 0.59 (min) means 0 hours and 59 minutes;
b. 1.59 (min) means 1 hour and 59 minutes.
4. Minute minder starts the countdown a few seconds after
you stop pressing the (-/+) buttons. The ».« dot symbol
is flashing.
Switching o the minute minder
(if one or more hotplates are active follow step 2).
1. Touch the On/O button to activate the hob on if it is
not switched on.
2. Touch the (-/+) buttons and press them until the dot
».« is fully illuminated (in case minute minder or power
setting of any hotplate is on). Press the (-) button to set
the time to 00.
3. After 10 seconds the minute minder is automatically
switched o.
Minute minder remains active even after the
appliance is switched off with the ON/OFF button.
Cooking timer can be set for each particular hotplate.
All timers can be set simultaneously and they can function
at the same time.
Cooking timer / Minute
minder
Cooking timer function
17

380354
Cooking timer must always be associated with an
active hotplate. This means that this particular hotplate
will be switched off when the preset time elapses.
Cooking timer can be set at maximum 1h and 59 minutes.
Switching on the cooking timer
1. Cooking timer can be switched on if at least one
hotplate is active.
2. To set the cooking timer for the first active hotplate,
touch the (-/+) buttons simultaneously.
Each following touch of the (-/+) moves you to the next
hotplate timer setting, which is indicated by the symbol
on the display.
3. Touch the (+) or (-) button to set the desired time,
starting with minutes first. First set minutes by pressing
the (+) button until the value 9.00, then the clock
switches to setting hours and minutes (0.10). Symbol
(min) is illuminated.
a. 0.59 (min) means 0 hours and 59 minutes;
b. 1.59 (min) means 1 hour and 59 minutes.
4. Minute minder starts the countdown a few seconds after
you stop pressing the (-/+) buttons. The ».« dot symbol
is flashing. Timer symbol of the relevant active
hotplate is illuminated constantly.
5. If you fail to set the timer cooking time with the (-/+)
button the cooking timer is automatically switched o
after 10 seconds.
To set the cooking timer for other active hotplates follow
the steps 1 to 3.
If several cooking timers/minute minders are
running, the cooking timer/minute minder display
will always show the cooking timer/minute minder
that has the least time remaining. The symbol
of that hotplate timer is also fully illuminated while
other timer symbols are just dimly illuminated.
Switching o the cooking timer
1. To switch of the cooking timer setting touch the (-/+)
buttons simultaneously and press them until fully
illuminated timer symbol is selected.
2. Press the (-) button to set time to 00.
3. After 10 seconds the cooking timer is automatically
switched o.
When the set cooking time elapses a beep sounds and the
red light of the active hotplate timer flashes. To switch o
the alarm press either (-) or (+) button.
TIMER
min
Switching o the timer/
minute minder
18

380354
Burning point of dierent types of oil
To ensure your food is fried as healthily as possible,
Gorenje recommends choosing the type of oil according
to the frying temperature. Each oil has a dierent burning
point at which toxic gasses are released. The below table
shows the burning points for various types of oil.
Oil Smoke point °C
Extra virgin olive oil 160 °C
Butter 177 °C
Coconut oil 177 °C
Canola oil 204 °C
Virgin olive oil 216 °C
Sunflower oil 227 °C
Corn oil 232 °C
Peanut oil 232 °C
Rice oil 255 °C
Olive oil 242 °C
Because the settings depend on the quantity and
composition of the contents of the pan, the table below is
intended as a guideline only.
• Use setting ‘boost’ and setting 9 to:
- bring the food or liquid to the boil quickly;
- ‘shrink’ greens;
- heat oil and fat;
- bring a pressure cooker up to pressure.
• Use setting 8 to:
- sear meats;
- fry flatfish;
- fry omelettes;
- fry boiled potatoes;
- deep fry foods.
• Use setting 7 to:
- fry thick pancakes;
- fry thick slices of breaded meat;
- fry bacon (fat);
- fry raw potatoes;
- make French toast;
- fry breaded fish.
Cooking settings
19
COOKING
Healthy cooking

380354
• Use setting 6 and 5 to:
- complete the cooking of large quantities;
- defrost hard vegetables;
- fry thin slices of breaded meat.
• Use settings 1-4 to:
- simmer bouillon;
- stew meats;
- simmer vegetables;
- melting chocolate;
- melt cheese.
20