Gorilla Carts GOR108-D User manual

Garden Dump Cart
Owners Manual
Model GOR108-D
Tricam
7677 Equitable Drive
Eden Prairie, MN 55344
1-800-867-6763
www.gorillacarts.net
Tub (1)
Lock (1)
Front Frame (1)
Rear Frame (1)
Front Bracket Assembly(1)
Rear Bracket (1)
Left Rear Brace (1)
Right Rear Brace (1)
Handle (1)
Coupling (1)
Wheel (4)
Bolt M8x20 (4)
Round Head Bolt M8x30 (4)
Round Head Bolt M8x20 (4)
Round Head Bolt M8x60 (1)
Lock Nut M8 (13)
Lock Nut M12 (4)
Wide Wing Washer ID 8mm (16)
Washer (5)
Washer ID 12mm (4)
Spacer (4)
12/07
• Important Safety Instructions
• Assembly Instructions
• Parts and Hardware Identification
CAUTION: Read, understand and follow ALL instructions before using this product.
Exploded Drawing for Assembly
Parts List
U.S. Patent #s 6,851,756 and 7,210,697
Other U.S. and Foreign Patents Pending
gor108-d Assy Manual 12/7/07 2:10 PM Page 1

Step 3
Assemble lock to tub using Round head M8X20 bolts (4pcs.),
M8 lock nuts (4pcs.), ID 8mm wide wing washers (8pcs.).
Step 2
Assemble rear bracket to rear frame and tub using
Round head M8X30 bolts (4pcs.), M8 lock nuts (4pcs.),
ID 8mm wide wing washers (8pcs.).
1. READ ALL INSTRUCTIONS CAREFULLY BEFORE USE. If you do not understand these instructions, need clarification or
further explanation, please call our toll free answer line for assistance at 1-800-867-6763.
2. Do not load Garden Dump Cart with more than 1,000 lbs. (453 kg). Do not use the dumping feature of the Garden Dump
Cart with more than 400 lbs. (181 kg).
3. Do not allow children to use the Garden Dump Cart unsupervised. This Garden Dump Cart is not a toy.
4. Always distribute payload evenly over the surface of the bed.
5. Do not load any items on the top edges of the plastic tray.
6. If any parts become damaged, broken, or misplaced, do not use the Garden Dump Cart until replacement parts
can be obtained.
7. Do not operate or use on objects that can cause damage to the pneumatic tires or tubes.
Do not inflate tires to more than 32 PSI / 2.2 BAR.
8. SAVE THESE INSTRUCTIONS!
Your Garden Dump Cart requires assembly. Account for all parts and hardware before beginning assembly. If any parts are
missing or damaged, or if you have any questions or need additional instructions, call the manufacturer at 1-800-867-6763.
Tools required for assembly: standard screwdriver, phillips screwdriver and socket set (or two adjustable wrenches).
Step 1
Assemble front bracket to front frame using M8X20 bolts
(4pcs.), M8 lock nuts (4 pcs.), and washers (4pcs.).
Step 5
Assemble the wheels using the M12 lock nuts (4pcs.),
spacers (4pcs.), and washers (4pcs.).
Step 6
Assemble the handle to the yoke using M8X60 bolt (1pc.),
M8 lock nut (1pc.), and washer (1pc.).
Step 4
Place tub into its dump position. Remove shoulder bolts from
rear. Take the front axle and frame and slide it over the back
bracket where the bolts were just removed. Once aligned,
reinsert shoulder bolts. The rear frame, front frame, and tub
should now all be connected.
Important Safety Instructions
DO NOT EXCEED MAXIMUM OVERALL LOAD CAPACITY 1,000 LBS.
MAXIMUM DUMPING LOAD CAPACITY 400LBS
Assembly Instructions
CAUTION
Using the Dumping Feature
To operate the dumping feature, pull the dumping
release handle outward to release the plastic bed from
the locking mechanism. Lift up the release handle to
rotate cart upward into the dumping position.
Returning the Plastic Bed to
the Lowered Position
Rotate the plastic bed back down to the lowered position.
Make sure the dumping release handle is locked into place
when the cart is in the lowered position.
gor108-d Assy Manual 12/7/07 2:10 PM Page 2