Gorilla Carts GOR200-T User manual

Garden
Dump
Cart
Owners Manual
Model GOR200-T
For product inquiries:
Tricam
7677 Equitable Drive
Eden Prairie, MN 55344
800-867-6763
www.tricam.com 10/06
• Important Safety Instructions
• Assembly Instructions
• Parts and Hardware Identification
CAUTION: Read, understand and follow ALL instructions before using this product.
U.S. Patent No. 6,851,756
Other U.S. and Foreign
Patents Pending
A. Tub (1)
B. Lock (1)
C. Front Frame (1)
D. Rear Axle Assembly (1)
includes left and right rear
struts and rear axle frame
E. Rear Axle Support Bar (1)
F. Front Axle Assembly (1)
G. Wheel (4)
H. Handle (1)
Exploded Drawing for Assembly
Parts List
A. M8x60 Bolt (1)
B. M8x40 Phillips Flat Head Bolt (2)
C. M8x40 Truss Head Bolt (2)
D. M8x20 Truss Head Bolt (10)
E. M8x20 Hex Head Bolt (2)
F. M8 Lock Nut (17)
G. M8 Washer (17)
H. Bushing (4)
I. 15mm Washers (2)
J. Cotter Pin (4)
Hardware List Images are
not to scale
A.
B.
D.
C. E.
F.
G.
H.
A.
B.
D.
C.
E.
F.
G. H.
I.
J.
GOR200-tmanual 11/6/06 8:01 PM Page 1

Step 3
Assemble lock to tub using
truss head M8X20 bolts
(4pcs.), M8 lock nuts
(4pcs.), washers (4pcs.).
Step 2
Attach the rear axle assembly and rear axle support
bar to the tub using M8X40 truss head bolts (2pcs.),
M8 lock nuts (2pcs.), and washers. Then attach left
and right rear struts to the tub using M8X20 truss head
bolts (4pcs.), M8 locknuts, and washers.
1. READ ALL INSTRUCTIONS CAREFULLY BEFORE USE. If you do not understand these instructions, need clarification or
further explanation, please call our toll free answer line for assistance at 1-800-867-6763.
2. Do not load Garden Dump Cart with more than 600 lbs. (272 kg). Do not use the dumping feature of the Garden Dump
Cart with more than 300 lbs. (136 kg). Weight rating based on evenly distributed load.
3. Do not allow children to use the Garden Dump Cart unsupervised. This Garden Dump Cart is not a toy.
4. This product is not to be used for transporting passengers.
5. This product is not to be used for highway use.
6. Always distribute payload evenly over the surface of the bed.
7. Do not load any items on the top edges of the plastic tray.
8. If any parts become damaged, broken, or misplaced, do not use the Garden Dump Cart until replacement parts
can be obtained.
9. Do not operate or use on objects that can cause damage to the pneumatic tires or tubes.
Do not inflate tires to more than 30 PSI / 2.07 BAR.
10.It is recommended to inspect the cart for damage prior to each use.
11.SAVE THESE INSTRUCTIONS!
Your Garden Dump Cart requires assembly. Account for all parts and hardware before beginning assembly. If any parts are
missing or damaged, or if you have any questions or need additional instructions, call the manufacturer at 1-800-867-6763.
Tools required for assembly: standard screwdriver, phillips screwdriver and socket set (or two adjustable wrenches).
Step 1
The left and right rear struts are preassembled to the
rear axle frame as shown below.
Step 5
Assemble rear axle assembly to tub using M8X20 truss
headbolts, M8 lock nuts, and washers.
Step 6
Assemble the wheels using bushings (4pcs.), washers
(4pcs.), and cotter pins (4pcs.).
Step 4
Assemble front axle assembly to
front frame using M8X40 bolts
(2pcs.), M8 lock nuts (2 pcs.),and
washers (2pcs.). Then attach front
axle support arm to frame using
M8X20 hex headbolts (2 pcs.), lock
nuts (2 pcs.), and washers (2pcs.).
Important Safety Instructions
Assembly Instructions
Swivel Handle Instructions
Step 1
Remove clips and cotter pins.
Step 2
Rotate the handle and
insert cotter pin.
Secure by attaching the clip.
Step 3
The second cotter pin
is used to attach the
handle to the trailer hitch.
Step 7
Assemble the handle to the yoke using M8X60 bolt (1pc.),
M8 lock nut (1pc.) and washer (1pc.).
DO NOT EXCEED MAXIMUM OVERALL LOAD CAPACITY 600 LBS.
MAXIMUM DUMPING LOAD CAPACITY 300 LBS.
WEIGHT RATING BASED ON EVENLY DISTRIBUTED LOAD.
CAUTION
Using the Dumping Feature
To operate the dumping feature, pull the dumping
release handle outward to release the plastic bed from
the locking mechanism. Lift up the release handle to
rotate cart upward into the dumping position.
Returning the Plastic Bed to the
Lowered Position
Rotate the plastic bed back down to the lowered position.
Make sure the dumping release handle is locked into place
when the cart is in the lowered position.
GOR200-tmanual 11/6/06 8:01 PM Page 2