MANUFACTURER’S TIPS
CLEANING AND CARE
• Be sure to turn the tamper so that its groove fits properly into the funnel.
• Long vegetables such as carrots should be fed into the funnel, narrow end first.
3. Press the fruits and/or vegetables gently with the funnel. Too much pressure
reduces the amount of juice extracted and can damage the appliance.
4. Stop the appliance before removing the tamper to add more fruits/vegetables
in order to avoid to avoid food expulsion.
5. Avoid overloading the juicer.
6. Always power the device o by turning the On/ o button to its "0" position
before removing the lid.
•The various apple varieties yield juices with dierent flavors and consistencies.
Experiment with dierent combinations to find your own favorite.
• Leafy green vegetables such as cabbage and spinach can be juiced. Roll the
leaves into cylinders of an appropriate size before feeding them into the funnel.
• Fruits and vegetables with very soft flesh, such as bananas, mangos, papayas
and avocados are not well-suited to juicing, since the result is often mashed fruit
instead of juice.
• All types of juice should be consumed right after juicing, as fresh juice quickly
loses important nutrients when exposed to the oxygen within the air. Taste can
also be aected.
• Pure apple juice turns brown quickly when exposed to air. To prevent discolor-
ation, serve apple juice immediately after juicing or add a little lemon juice.
• Remember that fruit pulp can be used in cakes, vegetable lasagne, muffins, etc.
1. Remove the plug from its wall socket and allow the apparatus to cool
completely before cleaning.
2. Clean the motor section with a slightly dampened cloth and, if necessary, a
little detergent. Do NOT immerse the motor section in any form of liquid!
• The centrifuge bowl, fruit pulp holder, base and all other detachable parts can
be washed by hand or in a dishwasher.
• Be careful not to touch the sharp parts at the bottom of the centrifuge bowl.
• Do not use any kind of strong or abrasive cleaning agent on the appliance or its
accessories. Never use a scouring sponge, as the surface may be damaged.
the side of the motor section.
3. Push the fruit pulp holder (2) upward under the drain edge on the base so that
it locks tightly onto the foot of the motor.
4. Carefully lock the centrifuge bowl (7) onto its base.
• Be careful not to touch the sharp parts at the bottom of the centrifuge bowl.
• Fit the centrifuge bowl properly onto its base, so that the gear on the bottom of
the bowl engages the gear within the base.
• For even rotation, be sure that the centrifuge bowl doesn't sit too loosely on its
base.
5. Place the lid (10) tightly on the appliance so that it covers both the fruit pulp
holder and the centrifuge bowl unit.
6. Turn the lock (4) to a vertical position and make sure that it engages the lid for
a fast lock. The lock makes a clicking sound when correctly placed.
7. Place a glass, bowl or other suitable container under the spout.
8. The apparatus is now ready for use.
PREPARATION OF FOOD CONTENT
• Always wash fruits and vegetables thoroughly prior to juicing.
• It is not necessary to remove seeds, pits or thin peels before using the appli-
ance.
• Fruits with thick peels, such as oranges and lemons, must be peeled before
juicing. It is particularly important to remove all the peel (including the pith), as
even small amounts of peel can impart an unpleasant taste to the juice.
• It is also necessary to remove large pits (such as plum and apricot pits) to avoid
damaging the appliance.
• Large fruits and vegetables should be cut into pieces that can fit into the funnel
(9).
PRODUCT USE
1. Start the appliance by turning the On/ o button to position "1" (low speed) or
position "2" (high speed).
• The low speed setting is suitable for juicing soft fruits and vegetables.
• The high speed setting is suitable for juicing harder fruits and vegetables.
2. Feed the selected fruits and/or vegetables into the appliance through the
funnel in shifts, pushing them down using the tamper (1).
STORAGE AND DISPOSAL
8 9
3. Allow all parts of the appliance to dry completely before reassembling.
STORAGE
Ensure product is dry before storing. Place in a cool, dry area to avoid humidity if
not used for long periods of time.
DISPOSAL
This product may not be disposed of along with with ordinary household waste, as
electrical and electronic waste must be disposed of separately.
Contact your retailer, distributor or the municipal authorities for further information
on product disposal.
WARRANTY DETAILS
This product is guaranteed under a one year limited warranty period, applicable to
the original purchaser and not transferable to a third party user.
Repair or replacement of defective parts are at the seller's discretion. In the event
that repair isn't possible, the seller will replace the product/ part. If product repair/
replacement won’t suffice, the seller has the option of refunding the cash value of
the product or component returned.
Product defects not covered under the warranty provisions include normal wear
and damage incurred from use or accidental negligence, misuse of instruction
specifications, or repair by unauthorized parties. The manufacturing company is not
liable for any incidental or consequential damages incurred by such circumstances.
Before using for the first time, or after prolonged storage without use, wash any
parts that will come into contact with food.
ASSEMBLY PRIOR TO USE
1. Place the motor section (3) on a flat surface, with adequate grip performance.
2. Place the base(6) on the motor section so that the spout (5) fits into the slot on
