GoWISE USA GW22054 User manual

GoWISE USA
Blood Pressure Monitor
Wrist Type
Instrucon Manual
GW22054
GoWISE USA
www.gowiseusa.com
[email protected]
1-855-233-9199
Thank you for purchasing this
GoWISE USA Blood Pressure
Monitor.
To assure correct use of this monitor,
read these instrucons carefully and
thoroughly.
Please keep the manual for future
reference.
R
R

2
CONTENTS
INTRODUCTION
•Features ................................................................
•LCD display ...............................................................
•Product symbols ..........................................................
•Product components . ......................................................
BEFORE YOU START
•Baeries .................................................................
•Installing and replacing baeries .............................................
•Oscillometric Measuring method . . ..........................................
•Seng date, me and measurement unit .....................................
MEASUREMENT
•Posioning the wrist cuff ...................................................
•Start a measurement . .....................................................
OPERATION OF RECORDS
•Recall records . ........................................................... .
•Delete records . ............................................................
INFORMATION FOR USER
•Tips for operaon .........................................................
•Maintenance .............................................................
ABOUT BLOOD PRESSURE
•What are systolic pressure and diastolic pressure? ..............................
•What is the standard blood pressure classificaon? . ............................
•Why does my blood pressure fluctuate throughout the day? ......................
•Why is the blood pressure readingIgot at the hospital different from home? . ......
•Does it maer which wrist is used to take my blood pressure? . ...................
TROUBLESHOOTING . .........................................................
SPECIFICATIONS ..............................................................
WARRANTY & CONTACT INFORMATION . ..........................................
3
4
4
5
5
5
6
6
8
8
9
10
11
12
12
13
14
14
14
15
16
17

3
INTRODUCTION
Thank you for s g this GoWISE USA Blood Pressure Monitor. It features blood
pressure measurement, pulse rate measurement, auto-save results, and a long life of reliable
service.
Measurements taken by GW22054 are equivalent to those obtained by a trained
observer using the cuff and stethoscope n method.
This manual contains important safety and care n as well as step-by-step
s for using the product. Read the manual carefully and thoroughly before using the
product.
Features:
•Systolic blood pressure
•Diastolic blood pressure
•Pulse rate
•Blood Pressure
•Irregular Heartbeat Dete
•60 Memory Recall
•Wrist Cuff range of 5.3” to 7.7” circumference
•Large digital LCD V.A. display
•Measurement appears during
CAUTION
This device is intended for adult use only.
This device is intended for non-invasive measuring of arterial blood pressure. It is not intended
for use on extremi es other than the wrist or for fluctua s other than obtaining a blood pressure
measurement.
Do not confuse self-monitoring with self-diagnosis—this unit allows you to monitor your blood
pressure. Always consult a physician before beginning or ending a medical treatment.
If you are taking medi , consult your physician to determine the most appropriate me to
measure your blood pressure. Never change a prescribed n without g your physician.
This unit is not suitable for c nuous monitoring during medical emergencies or o
The unit will y deflate, when the cuff pressure exceeds 40 kPa (300 mmHg). Should
the cuff not deflate when pressure exceeds 40 kPa (300 mmHg), detach the cuff from wrist and press
the START/STOP on to stop
To avoid measurement errors, carefully read this manual before using the product.
The equipment is not AP/APG equipment and is not suitable for use in the presence of a
flammable anesthe c mixture with air or with oxygen or nitrous oxide.
Inspect the monitor and accessories for proper working n before each use. Store them
carefully to avoid damage. (See more n in the Maintenance n of this manual.)

4
LCD display
Product symbols
Norm.
Hype.
G3
G2
G1
Opt.
Time/Date
Memory
Pul/min
Systolic
blood pressure High pressure result
Diastolic
blood pressure Low pressure result
BPM
Moon will result in inaccurate measurements
Memory If “M” shows, the displayed measurement values
is from the memory.For instrucons,refer to Page 9
mmHg Measurement unit the blood pressure
(1mmHg=0.133kPa)
kPa Measurement unit of the blood pressure
(1kPa=7.5mmHg)
Time(hour:minute) Currently me
Movement error
symbol Shocking will result in inaccurate
CUFF air is exhausng of deflangDeflang
Low baery Baeries are low and need to be replaced
Grade The grade of the blood pressure
SYMBOL DESCRIPTION EXPLANATION

5
Product components
List:
1. Blood Pressure Monitor-Wrist Type
2. 2 x AAAbaeries
3. Instrucon Manual
BEFORE YOU START
Baeries
Baeries: 2 x AAA baeries
The installment and replacement of baeries
1. Slide off the baery cover.
2. Install the baeries by matching the correct polarity, as shown.
3. Replace the cover.
LCD DISPLAY
SYSTOLIC
DIASTOLIC
MEM/DOWN
TOUCH KEY
SET/UP TOUCH KEY
START/STOP BUTTON
PULSE RATE
GRADE
TIME
CUFF
BATTERY
COMPARTMENT

6
Replace b s when any of the following occur
:
•The shows on display
•The display dims
•The display does not light up
CAUTION
•Remove eries from monitor if they will not be used for a long period of me.
•Do not dispose of s in fire. B s may explode or leak.
•Discard used b eries according to your local recycling guidelines.
•Always use the correct type of eries.
Oscillometric Measuring method
This product uses the Oscillometric Measuring method to detect blood pressure. Before every
measurement, the unit establishes a “zero pressure” equivalent to the air pressure. Then it starts
g the wrist cuff, meanwhile, the unit detects pressure s generated by beat-to-beat
e, which is used to determine the systolic and diastolic pressure, and also pulse rate.
The device also compares the longest and the shortest e intervals of detected pulse waves to
mean e interval, and then calculates standard . The device displays a warning signal with
the reading to indicate the d n of irregular heartbeat when the difference of the e intervals is
over 25%.
g date, me and measurement unit
It is important to set the clock before using your blood pressure monitor, so that a e stamp
can be assigned to each record that is stored in the memory. (year: 2000-2050)
1.
When the unit is off, touch "SET" briefly to turn on the set screen.
Then press and hold "SET" for 3 seconds. When the year flashes, go to next step.

7
2. Press the “MEM” to change the [YEAR].
3. When you get the right year, press “SET” to set the year and move to the next step
4. Repeat step 2 and 3 to set the [MONTH] and [DAY].
5.
6. Repeat step 2 and 3 to set the [UNIT]--"kPa" or "mmHg".
7. r the UNIT is set, “done” will appear on the display and then it will turn off
6. Repeat step 2 and 3 to set [HOUR] and [MINUTE].

8
MEASUREMENT
g the wrist cuff
1. Remove all accessories (e.g. watch, bracelet) from your wrist. If your physician has
diagnosed you with poor n in your arm, use your right wrist.
2. Roll or push up your sleeve to expose the skin.
3. Apply the cuff to your wrist with your palm facing up.
4. n and fasten the wrist cuff around the lower arm about 0.8” (2cm) from wrist. Leave
no extra space between the cuff and your skin; if the cuff is too loose, the measurement will
not be accurate.
•Rest for 5 minutes before measuring blood pressure.
•Wait at least 3 minutes between measurements. This allows your blood n to
recover.
•For a meaningful comparison, try to measure under similar c . For example, take
daily measurements at approximately the same e and same , or as directed by a
physician.
Start a measurement
1. Press the “START/STOP” to turn on the monitor, and it will finish the whole measurement
LCD display adjusts to zero a lly.
Inflates and measures

9
Displays and saves the results
2. Press the “START/STOP” to power off, otherwise it will turn off y within 1
minute.
OPERATION OF RECORDS
Recalling records
1. Press the “MEM” to show the most recent record.
2. Press the “MEM” or “SET” to get the record you want.
(The number of the record, date and e will be shown alternately.)
CAUTION
The most recent record (1) is shown first. Each new measurement becomes the (1) record. All
other records are pushed back one digit (e.g., 2 becomes 3, and so on), and the last record (60)
is dropped from the list.
UP
DOWN
The corresponding
The corresponding
date is January 5th.

10
g a record from memory
If you did not get the correct measurement, you can delete all results by following these steps:
1. When the unit is off, touch "MEM" briefly to turn on the appropriate screen.
Then press and hold "MEM" for 3 seconds; the display will flash "dEL ALL".
2. Press “SET” to confirm the , and the monitor will turn off
3. If you don’t want to delete the records, press “START/STOP” to escape.
4. I
f
there is no record, the display will only show hyphens.