GPM Dallas SIDDAL2NT User manual

idth: 62.5cm
Depth: 30cm
Height: 80cm
30 mins
(approx.)
00000 / 00000
00000 / 00000
Dallas 2 DOOR SIDEBOARD
If you need help or have damaged or missing parts, please email [e-mail]
Important – Please read these instructions fully before starting assembly
DimensionsNo. peopleAssemblyTimeOW#
GLOBALPROCUREMENTANDMARKETING LIMITED
Assembly Instructions – Please keep for future reference SIDDAL2NT
SIDDAL2BK

2
Check you have all the
components and tools listed
on pages 4 and 5.
Remove all fittings from the
plastic bags and separate
them into their groups.
Keepchildren and animals
away from the work area,
small parts could choke if
swallowed.
Make sure you have enough
space to lay out the parts
before starting.
Do not stand or put weight on
the product, this could cause
damage.
Assemble the item as close to
its final position (in the same
room) as possible.
Assemble on a soft, level
surface to avoid damaging the
unit or your floor.
e do not recommend the
use of power drill/drivers for
inserting screws, as this could
damage the unit. Only use
hand screwdrivers.
Dispose of all packaging
carefully and responsibly.
Ifyou areunhappywith theproductand wishto returnit,
pleasefollowtheretailer sreturnsprocedure.
Safety and Care Advice
Important –Please read these instructions fully before starting assembly
CareandMaintenance
● Only clean using a damp cloth and
mild detergent, do not use bleach or
abrasive cleaners.
● From time to time check that there
are no loose screws on this unit.
This product should not be
discarded with household waste.
Take to your local authority waste
disposal centre.
If kept outside please ensure in the winter months that the product is correctly covered or put away into a dry
environment to prevent corrosion, weathering or damage.
If your product is not designed to be outside, we recommend that it is always kept indoors in a dry environment.

3
Exploded View
If you have damaged or missing components,
email: [e-mail]
9
1
2
3
54
6
7
6
8

4
Components - Panels If you have damaged or missing components,
email: [e-mail]
1
2
3
4
5
7
Please check that you have all the componentslistedbelow beforeconstructing your item.
If you need help or have damaged or missing parts, please email [e-mail]
Important –Please read these instructions fully before starting assembly
PartNo DescriptionQtySize(mm)Thickness(mm)
8
9
625*3001
1
1
1
2
1
1
1
6 4
Toppanel
Bottom panel
Leftsidepanel
Rightsidepanel
Backpanel
Woodleg
Adjustableshelf
Leftdoorpanel
Right door panel
18
625*300 18
590*297 15
590*297 15
601*301 3
50*50
589*254 15
584*291
584*291
15
15
175

0
mm
10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
If you need help or have damaged or missing parts, please email [e-mail]

Assembly Instructions If you have damaged or missing components,
email: [e-mail]
Step 1
6
Step 2
2. Pushtheboltallthewayintothe side hole.
12
9
6
3
1. Press caminto pre-drilledholewith thearrow
pointingtowardthesidehole. (see 6O'clock. )
A
B
C
A
B
C
A
C
B
A
C
B
A
A
A
A
34
x4
2
12
NO GAP
3. Withall cam&boltsinstalledalignandpushthe
panelstogether-NOGAPS
(MAKESURE PANELS HAVENOGAPS)
4. Turncamclockwise totighten.Secure connection
byturning arrow on the camto 2O'clock to
smoothly lockpanelstogether.
9
6
3
3
4
1

If you have damaged or missing components,
email: [e-mail]
Step 3
7
Step 4
Warninglabel
onreverse
5
2
M
F
Assembly Instructions

If you have damaged or missing components,
email: [e-mail]
Step 5
8
Step 6
Dx4
2
J
x4
Assembly Instructions

If you have damaged or missing components,
email: [e-mail]
Step 7
9
Step 8
x4 6
6
6
Assembly Instructions

If you have damaged or missing components,
email: [e-mail]
Step 9
0
Step 10
90°
I
F
Finished
edge
K
7
Assembly Instructions