GPM STRATFORD CHTSTR6BK User manual

GOLBAL PROCUREMENT AND MARKETING LIMITED
STRATFORD 6 DRAWER WIDE CHEST
Assembly instruction- Please keep for future reference
Dimensions No.People Assembly Time OW#
Width: 120 cm
Depth: 40 cm
Height: 80 cm
60 mins
(approx)
Important-Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, please email [e-mail]
thank you
For purchasing this
GPM Limited
product
1
CHTSTR6BK CHTSTR6GY
CHTSTR6WT CHTSTR6OK
CHTSTR6BK
CHTSTR6GY
CHTSTR6WT
CHTSTR6OK
800mm
1200mm
232mm
400mm

Safety and Care Advice
!
Important-Please read these instructions fully before starting assembly
If you are unhappy with the product and wish to return it,
please following the retailer’s returns procedure.
Components - Panels
Make sure you have enough
space to lay out the parts
before starting.
Do not stand or put weight on
the product, this could cause
damage.
Assemble the item as close to
its final position (in the same
room) as possible.
Assemble on a soft, level
surface to avoid damaging the
unit or your floor.
We do not recommend the
use of power
drill/drivers for
inserting screw,
as this could
damage the unit.
only use hand screwdrivers.
Dispose of all packaging
carefully and responsibly.
Care and Maintenance
This product should not be
discarded with household
waste.Take to your local
authority waste disposal centre.
From time to time check
that there are no loose
screws on this unit.
Only clean using a damp cloth
and mild detergent, do not use
bleach or abrasive cleaners.
Check you have all the
components and tools listed
on pages 2,3 and 4.
Remove all fittings from the
plastic bags and separate
them into their groups.
Keep children and animals
away from the work area,
small parts could choke if
swallowed.
2
1
2
3-L
4
5
6
7
710
10
11
9
9
98-L
8-R
10
9
9
11 8-R
8-L
Left Drawer
front panel
Right Drawer
front panel

Components - Panels
Please check that you have all the components listed below before constructing your item.
Important-Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, please email [e-mail]
If you have damaged or missing components,
email: [e-mail]
Part No Description Qty Thickness
(mm)
1
2
4
5
6
7
8-L& 8-R
9
10
Right Side Panel
Bottom Panel
Lower Front Panel
Top Panel
15 mm
15 mm
15 mm
15 mm
15 mm
15 mm
3 mm
15 mm
15 mm
1
1
1
1
1
1
2
3
12
6
3
Centre Panel
Back Panel
Left Side panel
15 mm
Drawer Front Panel
Drawer Side Panel
Drawer Back Panel
Drawer Base Panel 3 mm
11
6
3-L& 3-R

Components - Fixings
Please check that you have all the components listed below before constructing your item.
Important-Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, please email [e-mail]
If you have damaged or missing components,
email: [e-mail]
Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings
may be supplied than are required.
0
mm
10
515 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170 175 180
Ruler - Use this to measure your screws (mm)
Tools Required ( Not Provided)
(A) (B) (D)( C )
(L) (M) (O)( N ) (P)
4
HARDWARE
ANTI - TIPPING KITS
M3.5 X 20mm X 4 Wall Plug X 4 Strap X 2
Bracket X 4
M4 X 32mm X 4
(E)
(F) (G) (I)( H ) (J)
(K)
JCBC M5 X 40mm X 12 M4 X 32mm X 24 Button Head 18mm X 12 M3.5 X 14mm X 72 Dowel (M8X25) X 26
Nail X 85 Handle X 6 Mini Fit X 12 set Leg Pin X 5 Drawer Slide X 6 set
Allen Key X 1
Bolt Nut

Step 2b
side panel
Attach Dowel and
E
Minifit Nut to drawer
H
x 12
9
E
H
Assembly Instructions If you have damaged or missing components,
email: [e-mail]
Step 2
Step 1
DDD
X3
Attach drawer slide rail to Panel boards , & with screw onto the specific
pre-drilled pilot holes as shown below.
J1 3 6 D
1 3-L 6
D D D
X3
DD D
X3
D D D
X3
H
Attach minifit bolt to
Drawer front panel 8
Step 2a
5
3-R
J
JJ
J
J
H
H
8-L &8-R
9
1 st 2nd
INSERT
RIGHT
POISITION
3rd
LOCK
B
B
C
G
H
8
9
9
10
H
F
11
Step 3c
Attach base board with
11
nail to the drawer base
F
using a small hammer.
Step 3b
with screw using a screw driver.
B
Secure the drawer back panel 10
to front panel with minifit.
8
Fasten drawer side panel 9
Step 3a Attach Handle to drawer
front panel with Bolt
G
8C
Step 3
Step 2c
Attach Dowel to
E
centre panel 3
3x 1
E
x 3 x 3
J
J J
J
J
J
J
J
J
J
J

Step 4 Step 5
x 6 sets
D
D
D
J
Attach drawer slide rail to drawer base
D
with screw and tighten with screw driver.
Step 7
6
D
D
D
D
DD
J
J
J
Slide in drawers into the chest carcase frame.
with the Drawer front panel marked.
F
7
7
M
O
A
A
A
A
A
A
A
A
A
A
1
2
3
4
5
6
2
Bottom panel and Stretcher panel with
5
screw and tighten with Allen key.
A
1 3 64
Attach Panel , and to Top panel .
step 6b
step 6a
at the back of the chest as shown.
M
O
Attach Anti tipping kit with
to the back of chest,
small hammer.
with Nail using a
F
Attach back board 7
step 6c
Attach Leg pin as shown,
using a small hammer.
I
Step 6
on the Left Side of the Chest and
on the Right Side of the Chest
8-L
8-R
8-L
8-R
Left Drawer
Front Panel
Right Drawer
Front Panel
1st
WALL
Drill
Bit
6mm
2nd
NL
O4th
O
O
P
Step 8
Assembly is complete.
Attach the Anti- Tipping kit to the wall, following the setps as shown.
I
I
I
I
I