GPM DESSTR User manual

GLOBAL PROCUREMENT AND MARKETING LIMITED
1
DESK
Assembly Instructions – Please keep for future reference DESSTR
Dimensions
No. people
Assembly Time
SKU #
Width: 89cm
45 mins
(approx.) DESSTR
Depth: 40cm
Height: 74cm
Important
– Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, please email [email protected]

2
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
•Check you have all the
components and tools listed
on pages 4 and 5.
•Remove all fittings from the
plastic bags and separate
them into their groups.
•Keep children and animals
away from the work area,
small parts could choke if
swallowed.
•Make sure you have enough
space to lay out the parts
before starting.
•Do not stand or put weight on
the product, this could cause
damage.
•Assemble the item as close to
its final position (in the same
room) as possible.
•Assemble on a soft, level
surface to avoid damaging the
unit or your floor.
•We do not recommend the
use of power
drill/drivers for
inserting screws,
as this could
damage the unit.
Only use hand screwdrivers.
•Dispose of all packaging
carefully and responsibly.
Care and Maintenance
•Only clean using a damp cloth and
mild detergent, do not use bleach or
abrasive cleaners.
•From time to time check that there
are no loose screws on this unit.
•This product should not be
discarded with household waste.
Take to your local authority waste
disposal centre.
If you are unhappy with the product and wish to return it,
please follow the retailer’s returns procedure.

3
Exploded View
If you have damaged or missing components,
email: [e-mail]

4
Components - Panels
Please check that you have all the components listed below before constructing your item.
Part No Description Qty
Size
(mm)
Thickness
(mm)
1
TOP PANEL
1
890X400
15
2
LEFT SIDE PANEL
1
725X380
15
3
RIGHT SIDE PANEL
1
725X380
15
4
BACK PANEL
1
856X150
15
5
BACK CROSS BAR
1
856X100
15
6
DRAWER BOTTOM CROSS BAR
1
336X75
15
7
MIDDLE PANEL
1
350X149
15
8
DRAWER FRONT
1
349X148
15
9
DRAWER BACK SIDE PANEL
1
281X100
15
10
DRAWER LEFT SIDE PANEL
1
320X100
15
11
DRAWER RIGHT SIDE PANEL
1
320X100
15
12
DRAWER BOTTOM PANEL
1
315X291
2.7
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, please email [email protected]
If you have damaged or missing components,
email: [e-mail]

5
Components - Fixings
Please check that you have all the components listed below before constructing your item.
Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings
may be supplied than are required.
(A)
X24
(B)
X24
(C)
X4
(D)
X1
(E)
X6
(F)
X8
(G)
X1
(H)
X2
(I)
X4
(J)
X1
Tools Required
Ruler – Use this to measure your screws (mm)
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, please email [email protected]
If you have damaged or missing components,
email: [e-mail]

6
Assembly Instructions
If you have damaged or missing components,
email: [e-mail]

7

8