GPM SIDHES1DG User manual

GLOBAL PROCUREMENT AND MARKETING LIMITED
1
1 Drawer Side Table and 2 Shelves
Assembly Instructions – Please keep for future reference SIDHES1DG
Dimensions
No.
people
Assembly
Time
OW
#
Width: 31cm 30 mins
(approx.)
00000 / 00000
00000 / 00000
Depth: 58cm
Height: 63cm
Important
PLEASE READ THESE INSTRUCTIONS FULLY BEFORE STARTING ASSEMBLY
PLEASE DO NOT THROW THE PACKAGING AWAY UNTIL YOU ARE SATISFIED WITH PURCHASE,
GOODS NEED TO BE RETURNED IN ORIGINAL PACKAGING.
If you need help or have damaged or missing parts, please email [e-mail]

2
Safety and Care Advice
Important
PLEASE READ THESE INSTRUCTIONS FULLY BEFORE STARTING ASSEMBLY
PLEASE DO NOT THROW THE PACKAGING AWAY UNTIL YOU ARE SATISFIED WITH PURCHASE,
GOODS NEED TO BE RETURNED IN ORIGINAL PACKAGING.
Check you have all the
components and tools listed
on pages 4 and 5.
Remove all fittings from the
plastic bags and separate
them into their groups.
Keep children and animals
away from the work area,
small parts could choke if
swallowed.
Make sure you have enough
space to lay out the parts
before starting.
Do not stand or put weight on
the product, this could cause
damage.
Assemble the item as close to
its final position (in the same
room) as possible.
Assemble on a soft, level
surface to avoid damaging the
unit or your floor.
We do not recommend the
use of power drill/drivers for
inserting screws, as this could
damage the unit. Only use
hand screwdrivers.
Dispose of all packaging
carefully and responsibly.
Glass
Warnings
1. Do not place very hot or very cold items against or in close proximity to glass surfaces unless an
adequately thick insulating material is used to prevent such items from coming into contact with the
glass.
2. Do not strike the glass with hard or pointed items.
3. When cleaning glass panels or mirrors use a damp cloth or leather with washing up liquid or soft soap
if necessary: do not use washing powders or any other substance containing abrasives since these
substances can scratch glass.
4. It is essential that this unit is fixed to a wall with the fixings provided (if applicable).
5. The class of glass used complies with Class xof BS6206
This product complies with BS7449: 1991
Imported by Global Procurement and Marketing Ltd
xxmm thickness tempered glass
Model no. xxx Batch no. xxx
Dimensions: 00 x 00 x 00mm
6. If a glass component is chipped or broken, replace with glass of the type described above. Consult the
manufacturer, retailer or agent with regard to obtaining a manufacturing specification and shape for
replacement glass quoting the model number and batch number or date of manufacture.
Care and Maintenance
Only clean using a damp cloth and
mild detergent, do not use bleach or
abrasive cleaners.
From time to time check that there
are no loose screws on this unit.
This product should not be
discarded with household waste.
Take to your local authority waste
disposal centre.
If kept outside please ensure in the winter months that the product is correctly covered or put away into a dry
environment to prevent corrosion, weathering or damage.
If your product is not designed to be outside, we recommend that it is always kept indoors in a dry environment.
If you are unhappy with the product and wish to return it,
please follow the retailer’s returns procedure.

3
Exploded View If you have damaged or missing components,
email: [e-mail]

4
Components - Panels
Please check that you have all the components listed below before constructing your item.
Part No Description Qty Size
(mm)
Thickness
(mm)
1A-Top board 1 580x310 15
2B-The bottom board under drawer 1 550x230 15
3B2-The double shelves 2 550x230 15
4D-Back board stop 2 230x100 15
5E-The left X frame 1 550x615 25
6E2-The right X frame 1 550x615 25
7F-Drawer’s front 1 227x125 15
8G-Drawer’s right side board 1 335x115 12
9H-Drawer’s left side board 1 335x115 12
10 K- Drawer’s back board 1 195x115 12
11 L-Drawer’s bottom board 1 330x205 3
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, please email aft[email protected]
If you have damaged or missing components,
email: [e-mail]

5
Components - Fixings
Please check that you have all the components listed below before constructing your item.
Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings
may be supplied than are required.
(A) (B) (C) (D)
(E) (F) (G) (H)
(I) (J) (K) (L)
(M) (N) (O) (P)
(Q) (R) (S) (T)
(U) (V) (W) (X)
Tools Required
Ruler – Use this to measure your screws (mm)
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, please email [e-mail]
If you have damaged or missing components,
email: [e-mail]

6
Assembly Instructions If you have damaged or missing components,
email: [e-mail]

7
Assembly Instructions If you have damaged or missing components,
email: [e-mail]