GrainWood Cascais CA5108 User manual

Assembly Instructions
Thank you for choosing Grain Wood Furniture, it is an honor to be in your home!
If you have any questions, feedback, or need replacement parts please contact us at:
grainwoodfurniture.com/help or [email protected]
Made in Brazil
REV - 09/2023 page 1/7
2-person assembly
Cascais Trestle
Rectangular Table Base
CA5108
CA5110
CA5115
Blonde Oak
Brown Oak
Black Oak
Finish
Model #

page 2/7
Enjoy your 100% solid wood furniture!
PLEASE READ BELOW BEFORE BEGINNING ASSEMBLY
•Enlist help from a friend or family member as most items require two
people for proper assembly.
•Choose a spacious, open area near where the piece will be located once
assembled. It is easier to move parts than to relocate the furniture after it
is fully assembled.
•Do not throw away packaging material until assembly is complete.
•Assemble the item on a soft surface, such as cardboard or an old blanket
in order to protect the finish from possible dents or scratches.
•Lay out the parts in order and count them twice. In case any parts are
missing or damaged, document the problem with pictures and contact
support so we can make it right.
•Solid wood furniture may present imperfections such as wood knots,
minor splits or cracks which are a natural aspect of the material.
Whenever stability of the furniture is not compromised, we recommend
customers perform cosmetic touch-ups with wax crayon fillers sold at all
major hardware stores.
•It is best to use the tools provided in the box, such as a hex key, because
they may be specially sized for the piece of furniture.
•We do not recommend the use of power drills as they can damage your
furniture if not used correctly.
•Use a carpenter's square or hardcover book to check angles when
assembling drawers and doors. If they are not at 90 degrees, they will not
close properly.
•If you have any problems, we are here to help. Just go to
grainwoodfurniture.com/help.
•See grainwoodfurniture.com/care-guide for suggestions that will help
your furniture last for years.

page 3/7
Part #
02
03
HW
Leg
Center Crosspiece
Hardware
4
1
1
01 2
Upper Crosspiece
Description
Qty.
BOX 1
01
01
02
02
02
02
03

HARDWARE LIST
page 4/7
1/4x80
B26 4
B25
1/4"x40
12
G13 4,0 2
G17 50X50 4
H17 Ø20X7 4
Before starting assembly
please verify the hardware
set is complete.
For missing hardware please
contact us at
grainwoodfurniture.com/help
WARNING:
CHOKING HAZARD
Small parts, not for children.
To be assembled by an adult.
!ATTENTION

page 5/7
1)
2)
Tip: Use a rug or cardboard for floor protection.
Attention: Assemble the feet
keeping drilling on the same side.
2x
!
Fit wooden feet
2x
B25
B25
G13
G17
G17
02
02
01
02
02
B25
G17
4
4
50X50
1/4x40

3)
page 6/7
4)
B25+G13
B25+G13
B25+G13
B25+G13
B25+G13
B25+G13
03
B26+G13
B26+G13
B25 4
1/4x40
B25
B26
4
4
1/4X80
1/4x40

5)
page 7/7
H17
H17
H17
H17
Tip: Use a rubber mallet or a piece of wood to protect the finish when hammering the wood cap
!The wood caps should be
flush with the post surface
H17 4
Ø20X7