Gram GRAM Z3 User manual

!!
QUICK CONFIGURATION GUIDE
!
Connection
Connect!the!“RS-232!to!RD3!cable!Z”!(Ref.!36785)!to!the!weight!indicator!and!to!the!RD3!!
Repeater!Indicator.!
!
!
!
!
!
!
!
!
!
!
Step!1:!Configure!the!Z3!weight!indicator!for!use!with!the!RD3!Repeater!Indicator!
The!Z3!indicator!is!factory-configured!for!using!a!PR4!model!printer.!For!connect!it!to!RD3!Repeater!Indicator,!you!need!to!first!change!
this!configuration!before!its!use,!following!the!indications!contained!in!this!document.!Once!this!procedure!has!been!completed,!the!
configuration!is!registered!in!the!unit’s!non-volatile!memory!and!it!will!not!be!necessary!to!repeat!it.!
Press!key![M/BG]!to!access!the!configuration!options!menu.!
1. Press!key!à!to!move!to!the!rS232!menu!option.
2. Press!key!
¿
!to!validate.!The!visor!will!display!the!bAudr!option.
3. Press!key!
à
!repeatedly!to!move!forward!to!the!FOrN!option!and!press!key!
¿
!to!access!this!submenu!of!options.
4. Press!key!
à
!repeatedly!to!move!forward!to!the!rd3!option!and!press!key!
¿
!to!validate.!
5. The!visor!will!display!the!SAvE!message,!indicating!that!the!selected!option!has!been!saved!to!the!indicator’s!non-volatile!
memory.!
6. Press! the! ESC!key! repeatedly! to! exit! the! configuration! options! menu! and! return! to! normal! operating! mode! (weight!
indicator).!
!
!
!
!
Gram Precision S.L.
Travesía Industrial, 11 · 08907
Hospitalet de Llobregat · Barcelona (Spain)
Tel. [phone] · [phone]
Fax [phone]
[e-mail]
www.gram-group.com
Download!the!full!manual!from!the!following!link:!!
http://gram-group.com/wp-content/uploads/2016/12/MANUAL_Z3_2016_ENG_001.pdf!
!
RS-232!to!RD3!cable!Z!(Ref.!36785)!
EN