Grandstream Networks WP810 User manual

Grandstream Networks, Inc.
126 Brookline Ave, 3rd Floor
Boston, MA 02215. USA
Tel : [phone] - 9300
Fax: [phone] - 1987
www.grandstream.com
For Certication, Warranty and RMA information, please visit
www.grandstream.com
WP810
Enterprise Portable Wi-Fi Phone
Quick Installation Guide
In all EU member states, operation of 5150
- 5350 MHz is restricted to indoor use only.

Content
English............................................................1
简体中文........................................................6

~1~ ~2~
PRECAUTIONS
1x Charging
Station
The WP810 is not pre-congured to support or make
emergency calls to any type of hospital, law en-
forcement agency, medical care unit (“Emergency
Service(s)”) or any other kind of Emergency Service.
You must make additional arrangements to access
Emergency Services. It is your responsibility to purchase
SIP-compliant Internet telephone service, properly con-
gure the WP810 to use that service, and periodically
test your conguration to conrm that it works as you
expect. It is also your responsibility to purchase tradi-
tional wireless or landline telephone services to access
Emergency Services.
GRANDSTREAM DOES NOT PROVIDE CONNECTIONS TO
EMERGENCY SERVICES VIA THE WP810. NEITHER GRAND-
STREAM NOR ITS OFFICES, EMPLOYEES OR AFFILIATES MAY
BE HELD LIABLE FOR ANY CLAIM, DAMAGE, OR LOSS,
AND YOU HEREBY WAIVE ANY AND ALL SUCH CLAIMS
OR CAUSES OF ACTION ARISING FROM OR RELATING
TO YOUR INABILITY TO USE THE WP810 TO CONTACT
EMERGENCY SERVICES, AND YOUR FAILURE TO MAKE
ADDITIONAL ARRANGEMENTS TO ACCESS EMERGENCY
SERVICES IN ACCORDANCE WITH THE IMMEDIATELY PRE-
CEDING PARAGRAPH.
The GNU GPL license terms are incorporated into the
device rmware and can be accessed via the Web user
interface of the device at my_device_ip/gpl_license. It
can also be accessed here: http://www.grandstream.
com/legal/open-source-software
To obtain a CD with GPL source code information
please submit a written request to info@grandstream.
com
WP810 PACKAGE CONTENTS
1x 5V Power
Adapter
1x WP810
Handset 1x Quick Installation Guide
1x Handset
Belt Clip
•Do not attempt to open, disassemble, or modify the device.
•Do not use a third party power adapter.
•Do not expose the device to temperatures outside the range
of -20ºC to 60ºC.
•Do not expose the WP810 at environments outside of the hu-
midity range of 10-90% RH (non-condensing).
OVERVIEW
The WP810 is a portable Wi-Fi phone designed to suit a vari-
ety of enterprises and vertical market applications, including
retail, logistics, medical and security. This powerful, portable
Wi-Fi phone comes equipped with integrated dual-band
802.11a/b/g/n/ac Wi-Fi support, advanced antenna design
and roaming support. By adding HD voice with dual-MICs,
the WP810 offers a powerful combination of features, mobility
and durability to suit all portable telephony needs.
5V
1x Rechargeable
Battery
EN
EN

~3~ ~4~
SETTING UP THE WP810
Charging Station:
Plug the power adapter into a power source socket to start
using the charging station.
1: Charging station
2: Power adapter
• Open the battery cover.
• Insert the battery with the electrodes in the bottom left
corner.
• Close the battery cover.
Note: Please charge the battery fully before using the hand-
set for the rst time.
12
3
1: Battery cover
2: Battery
3: Rear of handset
Handset:
2
1
WP810 DESCRIPTION
2. Earphone
13. Color LCD
Screen
6. 4 Arrow key
combination
(Up, Down,
Left, Right)
15. Menu/Ok key
7. Off-hook /
Dial key
16. On-hook or
Power key
8. Alphanumeric
keypad
10. Handsfree /
Speaker key
19. Microphone
9. */ Mute key
14. Softkeys
3. Volume
Up key
18. Contacts
17. #/ Lock key
12. 3.5 mm
headset jack
11. LED
indicator
4. Volume
down key
5. PTT key
5V
1. Proximity
Sensor

~5~ ~6~
CONNECTING WP810 TO WI-FI NETWORK
1. On LCD menu, press Menu key and navigate to Settings →
Network Settings → Wi-Fi.
2. Set Wi-Fi to “On” and navigate to “Wi-Fi Settings”. A list of
Wi-Fi networks will be displayed.
3. Select the desired network to connect to. (Enter the correct
password to connect if requested)
WP810 will display Wi-Fi icon on top of the main LCD menu if
the connection to the Wi-Fi network is successful.
ACCESSING WP810 WEB GUI
1. Press the UP button to see the IP address.
2. Type the phone’s IP address in your PC browser.
Note: The computer needs to be on same network as WP810.
3. Enter admin’s username and password to access the con-
guration menu. (The factory default username is “admin”
while the default random password can be found on the stick-
er at the back of the unit).
Refer to online documents and FAQ for more detailed
information: http://www.grandstream.com/our-products
WP810不预设对医院、执法机构、医疗中心(急救服
务)以及各种紧急服务的紧急通话服务。用户必须自行
设定紧急通话功能。用户必须自行购买SIP兼容的网络
电话服务，正确地设定WP810使用该服务，并定期测
试您的配置以确保WP810如预期工作，否则请购买传
统无线或有线电话服务来拨打紧急通话。
Grandstream Networks 公司的WP810不支持紧急通话
服务。Grandstream Networks公司、其管理者和员工以
及其相关机构对此所造成的任何索赔、损失或者损害
都不负有任何法律追究责任。在此，您将无权对任何
以及所有由于无法通过WP810拨打紧急电话以及没有
遵照前段文字描述而造成紧急通话失败的事件提出诉
讼。
GNU GPL许可条款已包含在设备固件中，可以通过设
备的Web用户界面 my_device_ip/gpl_license 进行访问。
也可以通过以下链接访问：http://www.grandstream.com/le-
gal/open-source-software
如果需要包含GPL源代码信息的CD，请发邮件到
[email protected] 提交请求 。
ZH
ZH

~7~ ~8~
注意事项
充电座 (1个)
WP810 设备包装清单
5V 电源适配器
(1个）
WP810手柄
(1个) 快速安装指南（1本）
手柄皮带夹
(1个)
•请不要打开、拆卸或修改该设备 。
•请不要使用第三方的电源适配器 。
•不要将本设备暴露在温度-20℃至60℃以外。
•不要将本设备暴露在环境湿度如下范围以外：10-90％RH（无冷
凝）。
产品概览
WP810是一款便携式Wi-Fi手机，旨在满足各种企业和垂直市场的应
用需求，包括零售，物流，医疗和安全。 这款功能强大的便携式电
话配备了双频802.11a /b/g/n/ac Wi-Fi，先进的天线设计并支持漫游。
通过增加高清语音的双麦克风，WP810提供了功能性，移动性和耐
用性的强大组合，可满足所有便携式电话的需求。
5V
充电电池
(1个)
配置WP810
充电站:
将电源适配器插入电源插座以开始使用 充电座。
1: 充电座
2: 电源适配器
• 打开电池盖。
• 将电池的电极端插入左下角。
• 合上电池盖。
注意：在首次使用手柄之前请将电池充满电。
12
3
1：电池盖
2：电池
3：手柄后部
手柄:
2
1
5V

~9~ ~10~
WP810 简介
2. 听筒
13. 彩色液晶屏
6. 4 箭头组合键
（上 、下 、左
、 右） 15. 菜单/确认键
7. 摘机/拨号键
16. 挂机或电源键
8. 字母数字键盘
10. 免提/扬声器键
19. 麦克风
9. */静音键
14. 软按键
3. 音量提高键
18. 电话薄
17. # / 锁定键
12. 3.5毫米耳机插孔
11. LED指示灯
4. 音量降低键
5. PTT 键
1. 近距离传感器
连接WP810至WI-FI网络
1. 在LCD菜单中，按菜单键和导航键至：设置 → 网络设置。
2. .按下“上”方向键，此时电话屏幕显示话机IP地址；
3. 选择想要连接的网络。 （如果要求，请输入正确的密码进行连
接）如果与Wi-Fi网络的连接成功，WP810将在LCD主页顶部显示
Wi-Fi状态图标。
打开WP810网页用户界面
1. 按下“上”方向键，此时电话屏幕显示话机IP地址；
2. 在您电脑浏览器中输入话机IP地址 。
注意：电脑和WP810应在同一网络中。
3. 输入管理员账号及密码，进入配置页面。（出厂默认用户名
为”admin”, 出场默认随机密码可以在设备背后的贴纸上找到）。
欲获取详细的话机使用信息，请在以下链接中下载WP810用户手册:
http://www.grandstream.com/our-products