Grandstream Networks GXW-4004 User manual

http://www.elastix.org
Grandstream GXW4004
and Elastix Server
Setup Guide
http://www.elastix.org
Grandstream GXW4004
and Elastix Server
Setup Guide
http://www.elastix.org
Grandstream GXW4004
and Elastix Server
Setup Guide

PaloSanto Solutions
Grandstream GXW4004 and Elastix Server Setup Guide
2
1.0 Setup Diagram
Figure 1-1 is a setup diagram for a single gateway Grandstream GXW4004 configuration.
The gateway is setup as a SIP telephony device.
Figure 1-1. Setup Diagram
2.0 Host PC Environment
Table 2-1. Host Server Environment Details
Description
Hardware Type
Elastix Appliance ELX-Series
Hardware Version
ELX-3000
Software Type
Elastix
Software Version
2.3
3.0 Test Setup Equipment
Table 3-1. Test Setup Equipment
Equipment
Model
Version
IP (SIP) Phone
N/A
N/A
Grandstream
GXW4004
1.0.3.10
Switch
N/A
N/A

PaloSanto Solutions
Grandstream GXW4004 and Elastix Server Setup Guide
3
4.0 Setup Procedure
To set up the Elastix Server for the Grandstream GXW4004
1. Go to the web address of the Elastix Server Login page. The web address is
determined by the customer, for this guide we have used the IP address 192.168.1.75
2. On the Login page, type the username and password for an administrative user into
the Username and Password fields, see Figure 4-1. The username and password are
determined by the customer.
Figure 4-1. Login
3. Press Enter or click on the Submit button to go to Elastix’s Dashboard
4. Once inside, click on the PBX tab on the menu at the top of the screen
Figure 4-2. Dashboard
5. Click on the Submit button to add an extension, see Figure 4-3. This will take you to
the Add SIP Extension page.

PaloSanto Solutions
Grandstream GXW4004 and Elastix Server Setup Guide
4
Figure 4-3. Add an Extension
6. On the Add SIP Extension page (Figure 4-4), fill in the following information:
•User Extension (701 in this example)
•Display Name (‘AnalogPhone’in this example)
•secret (‘h7Dka3Rf9si0t’in this example)
Figure 4-4. Add SIP Extension
7. Click on “Submit” button at the end of the page, and you will see a similar page on
Figure 4-5 displaying the “Apply Configuration Changes Here” pink ribbon on top of
the screen. Click on there to apply changes.
Figure 4-5
PaloSanto Solutions
Grandstream GXW4004 and Elastix Server Setup Guide
4
Figure 4-3. Add an Extension
6. On the Add SIP Extension page (Figure 4-4), fill in the following information:
•User Extension (701 in this example)
•Display Name (‘AnalogPhone’in this example)
•secret (‘h7Dka3Rf9si0t’in this example)
Figure 4-4. Add SIP Extension
7. Click on “Submit” button at the end of the page, and you will see a similar page on
Figure 4-5 displaying the “Apply Configuration Changes Here” pink ribbon on top of
the screen. Click on there to apply changes.
Figure 4-5
PaloSanto Solutions
Grandstream GXW4004 and Elastix Server Setup Guide
4
Figure 4-3. Add an Extension
6. On the Add SIP Extension page (Figure 4-4), fill in the following information:
•User Extension (701 in this example)
•Display Name (‘AnalogPhone’in this example)
•secret (‘h7Dka3Rf9si0t’in this example)
Figure 4-4. Add SIP Extension
7. Click on “Submit” button at the end of the page, and you will see a similar page on
Figure 4-5 displaying the “Apply Configuration Changes Here” pink ribbon on top of
the screen. Click on there to apply changes.
Figure 4-5

PaloSanto Solutions
Grandstream GXW4004 and Elastix Server Setup Guide
5
8. With this you have just finished creating a SIP extension that will be used by the
Grandstream GXW4004 to integrate an analog phone connected to it. Repeat Steps 5
through 8 to similarly create another extension (different values on Step 6) to be used by
the IP (SIP) Phone to register as well (extension 302 in this example). Once you
finished you will see something similar to Figure 4-6.
Figure 4-6
9. You will need to enter the information from the extension created on the Elastix
Server into the Grandstream Gateway.
For the initial configuration, refer to the Grandstream GXW4004 User Manual found at:
http://www.grandstream.com/index.php/products/ip-voice-telephony/enterprise-
analog-gateways/gxw400x
Factory default settings
IP Addressing
DHCP
Web Access Password
admin
10.Log in to the Grandstream GXW4004 WebUI by pointing your browser to the IP
address of the gateway.
11. When prompted, enter the Web Access Password to accesss to the WebUI (Figure 4-
7).
Figure 4-7 Grandstream WebUI
PaloSanto Solutions
Grandstream GXW4004 and Elastix Server Setup Guide
5
8. With this you have just finished creating a SIP extension that will be used by the
Grandstream GXW4004 to integrate an analog phone connected to it. Repeat Steps 5
through 8 to similarly create another extension (different values on Step 6) to be used by
the IP (SIP) Phone to register as well (extension 302 in this example). Once you
finished you will see something similar to Figure 4-6.
Figure 4-6
9. You will need to enter the information from the extension created on the Elastix
Server into the Grandstream Gateway.
For the initial configuration, refer to the Grandstream GXW4004 User Manual found at:
http://www.grandstream.com/index.php/products/ip-voice-telephony/enterprise-
analog-gateways/gxw400x
Factory default settings
IP Addressing
DHCP
Web Access Password
admin
10.Log in to the Grandstream GXW4004 WebUI by pointing your browser to the IP
address of the gateway.
11. When prompted, enter the Web Access Password to accesss to the WebUI (Figure 4-
7).
Figure 4-7 Grandstream WebUI
PaloSanto Solutions
Grandstream GXW4004 and Elastix Server Setup Guide
5
8. With this you have just finished creating a SIP extension that will be used by the
Grandstream GXW4004 to integrate an analog phone connected to it. Repeat Steps 5
through 8 to similarly create another extension (different values on Step 6) to be used by
the IP (SIP) Phone to register as well (extension 302 in this example). Once you
finished you will see something similar to Figure 4-6.
Figure 4-6
9. You will need to enter the information from the extension created on the Elastix
Server into the Grandstream Gateway.
For the initial configuration, refer to the Grandstream GXW4004 User Manual found at:
http://www.grandstream.com/index.php/products/ip-voice-telephony/enterprise-
analog-gateways/gxw400x
Factory default settings
IP Addressing
DHCP
Web Access Password
admin
10.Log in to the Grandstream GXW4004 WebUI by pointing your browser to the IP
address of the gateway.
11. When prompted, enter the Web Access Password to accesss to the WebUI (Figure 4-
7).
Figure 4-7 Grandstream WebUI

PaloSanto Solutions
Grandstream GXW4004 and Elastix Server Setup Guide
6
12. Use the information from the Add SIP Extension page (Figure 4-4) to enter the
following necessary information on “FXS Ports”section of the Grandstream Gateway
WebUI (Figure 4-8):
SIP User ID: “701” in this example
Authenticate ID: “701” in this example
Password: “7Dka3Rf9si0t” in this example
Name: “AnalogGS” in this example
Profile ID: Profile 1
Figure 4-8. FXS Ports
13. Once you have entered the required information, click on ‘Update’ button located at
the end of the page. Now go “Profile 1” to edit some parameters (Figure 4-9).
Profile Active: Yes
Primary SIP Server: 192.168.1.75 (Elastix Server’s IP Address)
Preferred DTMF method (Priority 1): RFC2833
Figure 4-9. Profile 1
14. Click on “Update” and reboot the phone.
15. Once rebooted, go to “Status” section and check if the registration was successful
for the first fxs port. (Figure 4-10).

PaloSanto Solutions
Grandstream GXW4004 and Elastix Server Setup Guide
7
Figure 4-10. Status
16. To test the settings, pick up the previously configured IP (SIP) Phone and call to the
analog phone connected on the FXS 1 port of the GXW4004 (701 in this example).
When the call is established, speak into the phone and verify that the other IP (SIP)
Phone can hear your voice. Now make a call from analog phone to the IP Phone (from
701 to 301) and check the call is established correctly. This step completes the
procedure to integrate analog phones with Elastix Server.