Grandstream Networks HandyTone-286 Rev 3.0 User manual

User Manual
HandyTone-286
Analog Telephone Adaptor
Version 1.00
Grandstream Sdn. Bhd.
www.grandcall.com

2
HandyTone-286 User Manual Grandstream Sdn Bhd
Table of Contents
1. WELCOME…………………………………………………………………………3
2. INSTALLATION…………………………………………………………………...4
2.1. WHAT ISINCLUDED IN THE PACKAGE…………………………………..5
2.2. SAFETY COMPLIANCES…………………………………………………….5
3. PRODUCT OVERVIEW…………………………………………………………..6
3.1. KEY FEATURES……………………………………………………………….6
3.2. HARDWARE SPECIFICATION………………………………………………7
4. BASIC OPERATIONS……………………………………………………………..8
4.1. GET FAMILIAR WITH KEY PAD VOICE PROMPT.………..…….………..8
4.2. MAKE PHONE CALLS..………………………………………………..……10
4.2.1. CallingPhone or Extension Numbers…………………………………10
4.2.2. Direct IP Calls…………………………………………………………10
5. CONFIGURATION GUIDE………………………………………………………13
5.1. CONFIGURING HANDYTONE IP THROUGH VOICE PROMPT…………13
5.1.1. DHCP Mode……………………….…………………………………..13
5.1.2. STATICIP Mode..…………………………………………………….13
5.2. CONFIGURING HANDYTONE WITH WEB BROWSER………………….13
5.2.1. Access the Web Configuration Menu………………………………....13
5.2.2. Configuration Menu…………………………………………………...14
5.2.3. Savingthe ConfigurationCharges…………………………………….21
5.2.4. Rebootingthe HandyTone ATA from remotely………………………22
5.3. CONFIGURATION THROUGH A CENTRALSERVER……………………23
6. SOFTWARE UPGRADE…………………………………………………………..23
6.1. UPGRADE WITH TFTP……………………………………………………….23

3
HandyTone-286 User Manual Grandstream Sdn Bhd
1. Welcome
Congratulations on becoming an owner of HandyTone-286! You made an
excellent choice and we hope you will enjoyall its capabilities.
Grandstream's award-wining HandyTone-286 is innovative Analog Telephone
Adaptor that offers a rich set of functionalityand superb sound qualityat ultra
affordable price. They are fullycompatible with SIP industrystandard and can
interoperate with manyother SIP compliant devices and software on the market.
HandyTone-286 runs the same VoIP stack as BudgeTone-100 series IP telephone’s.
Additionally, it has G.168 to remove line echo.

4
HandyTone-286 User Manual Grandstream Sdn Bhd
2. Installation
HandyTone Analog Telephone Adaptor is designed to work with an ordinary analog
telephone. The following photo illustrates the appearance of a HandyTone-286.

5
HandyTone-286 User Manual Grandstream Sdn Bhd
2.1 What is Included in the Package
The HandyTone-286 package contains:
1) One HandyTone-286
2) One universal power adaptor
3) One Ethernet cable
2.2 Safety Compliances
The HandyTone-286 is compliant with various safety standards including FCC/CE.
Its power adaptor is compliant with UL standard. The HandyTone ATA should only
operate with the universal power adaptor provided in the package.

6
HandyTone-286 User Manual Grandstream Sdn Bhd
3. Product Overview
3.1 Key Features
•Support SIP 2.0, TCP/UDP/IP, RTP/RTCP, HTTP, ICMP, ARP, DNS, DHCP,
NTP/SNTP, TFTP protocols
•Support IETF STUN.
•Interoperable with various 3rd party SIP end user device, Proxy / Registrar / Server,
and gateway products.
•AdvancedDigital Signal Processing (DSP) technology to ensure superior audio
quality
•Advanced and patent pending adaptive jitter buffer control, packet delay and loss
concealment technology
•Support popular vocoders including G.723.1 (5.3K/6.3K), G.729A/B, G.711 (a-law
and u-law), G.726 (40K/32K/24K/16K), as well as G.728.
•Support standard voice features such as Call Waiting, Transfer, Forward, in-band
and out-of-band DTMF, Dial Plans
•Support Silence Suppression, VAD (Voice Activity Detection), CNG (Comfort
Noise Generation), Line Echo Cancellation (G.168), and AGC (Automatic Gain
Control)
•Support DIGEST authentication (MD5, MD5-sess)
•Provide easy configuration thru manual operation (voce prompt along with the
analog phone keypadand Web interface) or automated centralizedconfiguration
file.
•Support for Layer2 (802.1Q VLAN, 802.1p) and Layer3 QoS (ToS, DiffServ,
MPLS)
•Remote software upgrade capability via TFTP

7
HandyTone-286 User Manual Grandstream Sdn Bhd
3.2 Hardware Specification
The table below describes the difference among these models.

8
HandyTone-286 User Manual Grandstream Sdn Bhd
4. Basic Operations
4.1 Get Familiar With Key Pad And Voice Prompt
HandyTone-286 has storedvoice prompt menu for quick browsing and simple
configuration. To enter this voice prompt menu, simple press the button. After
figuring out its IP address, HandyTone-286 can be configured thru web interface
just like BudgeTone-100 IP telephone.

9
HandyTone-286 User Manual Grandstream Sdn Bhd
Notes:
Once button is pressed, it enters voice prompt main menu. If button is pressed again
while it is already in the voice prompt menu state, it jumps to “Direct IP Calling”
option and dial tone plays in this state:
‘*’ functions similar to ‘ ’key of BT-100 phone to select the nextmenu option
‘#’ returns back to main MENU
‘9’ is similar to ENTER key in many cases to confirman option
All entereddigit sequences have known lengths - 2 digits for menu option and 12
digits for IP address. Once all digits are accumulated, it automatically processes
them. Key entry cannot be deleted but the phone may prompt error once it is
detected

10
HandyTone-286 User Manual Grandstream Sdn Bhd
4.2 Make Phone Calls
4.2.1Calling Phone or Extension Numbers
There are currently two methods to make a extension number call:
1) Dial the extension number directly and wait for 5 seconds.
2) You candial the numbers directly, and press #(assuming that “use #” as dial key
is selected in web configuration).
#Note: Currently, Flash, Transfer is not supported yet, Hold is normally a function
of Analog phone function.
4.2.2DirectIP Calls
Direct IP calling allows 2 phones, that is, a HandyTone with a analog phone and
another VOIP Device,to talk to each other in an adhoc fashion without a SIP proxy.
VoIP calls canbe made between two phonesif :
•bothHandyTone ATA and other VOIP Device (i.e., another HandyTone ATAor
other HandyTone ATA) have public IP addresses, or
•bothHandyTone ATA and other VOIP Device (i.e., another HandyTone ATAor
other HandyTone ATA) are on a same LAN using private or public IP addresses,
or
•bothHandyTone ATA and other VOIP Device (i.e., another HandyTone ATAor
other HandyTone ATA) canbe connected through a router using public or
private IP addresses.
To make a direct IP calling, first pick up the analog phone or turn on the
speakerphone on the analog phone, then follow Section 4.1 with voice prompt 47,
followedby the 12-digit target IP address. If there is a user part, again follow
Section 4.1 with voiceprompt 47, and then the encoded user part, followed by *3
(encoding for “@”) and then followed by the12-digit target IP address. Destination
ports can also be specified using *4 (encoding for “:”) followed by the encoded port
number.