Grandstream Networks GWN7600 User manual

[email protected] www.grandstream.com
GWN7600



which the controller is embedded within the product’s web user interface. This allows each access point to manage





1.17Gbps wireless

Gigabit wireline ports

coverage range

WiFi client devices





via digital signatures, unique

default password per device

real-time performance


GWN7600 to auto-discover,
auto-provision and manage


Wireless Access Point

www.grandstream.com
WiFi Standards 
Antennas 

WiFi Data Rates





*Actual throughput may vary depending on many factors including environmental conditions, distance between
devices, radio interference in the operating environment and mix of devices in the network
Frequency Bands 

Channel Bandwidth 

WiFi and System Security


password per device
MIMO 
Coverage Range 
Maximum TX Power


Receiver Sensitivity
2.4G


5G


SSIDs 
Concurrent Clients 
Network Interfaces 
Auxiliary Ports 
Mounting 
LEDs 
Network Protocols 
QoS 
Network Management 





Environmental



Physical



Package Content 
Compliance 




OVERVIEW
To ensure easy installation and management, the GWN7600 uses a controller-less distrib-
uted network management design in which the controller is embedded within the product’s
web user interface. This allows each access point to manage a network of up to 30 GWN7600
series APs independently without needing separate controller hardware/software and with-
out a single point-of-failure. This wireless access point can be paired with any third party
routers as well as Grandstream GWN series routers. With support for advanced QoS,
low-latency real-time applications, 450+ concurrent client devices per AP and
dual Gigabit network ports with PoE, the GWN7600 is an ideal WiFi access point
for medium wireless network deployments with medium-to-high user density.
PRECAUTIONS
• Do not attempt to open, disassemble, or modify the device.
• Do not expose this device to temperatures outside range of -20°C to 40 °C.
• Do not expose the GWN7600 to environments outside of the following humidity range:
10-90% RH (non-condensing).


PACKAGE CONTENTS
GWN7600 Access Point
1 x Quick Installation Guide
1 x GPL Statement Ceiling Mounting Bracket
3 x Screw (PM 3.0 x 50)
3 x M3 NUT
3 x Plastic Expansion Bolt
3 x Screw (PA 3.5 x 20 )
GWN7600 PORTS
Port Description
POWER Power adapter connector (DC24V, 1A)
Note: Power adapter is not provided.
NET/POE Ethernet RJ45 port (10/100/1000Mbps) supporting
PoE.
NET Ethernet RJ45 port (10/100/1000Mbps) to your
router or another GWN76xx.
USB 2.0 port (for future IOT & location based
applications)
RESET Factory reset button. Press for 7 seconds to reset
factory default settings.
EN
Mounting Bracket

HARDWARE INSTALLATION
GWN7600 can be mounted on the wall or ceiling, Please refer to the following steps for
the appropriate installation.
Wall Mount
1. Position the mounting bracket at the desired location on the wall with the arrow pointing
up.
2. Use a pencil to mark the four mounting holes (screw holes DIA 5.5mm, reticle hole DIA
25mm).
3. Insert screw anchors into the 5.5 mm holes. Attach the mounting bracket to the wall by
inserting the screws into the anchors.

4. Connect the power cable and the ethernet cable (RJ45) to the correct ports of your
GWN7600.
5. Align the arrow on the GWN7600 with the arrow on the locking tab of the mounting


Ceiling Mount
1. Remove the ceiling tile.
2. Place the ceiling backing plate in the center of the ceiling tile and mark the mounting
screw holes (screw holes DIA 5.5mm, reticle hole DIA 25mm).
3. Insert the screws through the mounting bracket.
Ceiling Mounting Bracket M3 nut
M3.0x50 screw
4. Connect the power cable and the Ethernet cable (RJ45) to the correct ports of your
GWN7600.

5. Align the arrow on the GWN7600 with the arrow on the locking tab of the mounting

the network and power cables.

RJ45 Ethernet Cable
to Power over Ethernet
(PoE) Switch
Network
Port
POWERING AND CONNECTING THE GWN7600
GWN7600 can be powered on using PoE switch using following steps:
Step 1: Plug a RJ45 Ethernet cable into the network port of the GWN7600
Step 2: Plug the other end into the uplink port of the power over Ethernet (PoE) switch.
Note: Ceiling mounting is recommended for optimal coverage performance.


Using one of the above methods, the login screen will appear. Type in “admin” in both
Sign In.
Notes :
- Make sure that the GWN7600 is not already paired with another GWN7600/GWN7610


- For more information, please download the GWN7600 User Manual from:
http://www.grandstream.com/support
CONNECT TO GWN7600 DEFAULT WIFI NETWORK
GWN7600 can be used as standalone access point out of box, or after factory reset with
Wi-Fi enabled by default.
After powering the GWN7600 and connecting it to the network, GWN7600 will broadcast
a default SSID based on its MAC address GWN[MAC’s last 6 digits] and a random
password.
Note: GWN7600’s default SSID and password information are printed on the MAC tag of
the unit.
ACCESSING THE CONFIGURATION INTERFACE
A computer connected to the GWN7600’s SSID, or to the same network as the GWN7600

Method 1: Discover GWN7600 using its MAC Address.
1. Locate the MAC address on the MAC tag of the unit, which is on the underside of the
device, or on the package.
2. From a computer connected to same network as the GWN7600, type in the following
address using the GWN7600’s MAC address on your browser https://gwn_<mac>.local
Example: if a GWN7600 has the MAC address 00:0B:82:8B:4E:28, this unit can be ac-
cessed by typing https://gwn_000b828b4e28.local on the browser.
Method 2: Discover GWN7600 using GWN DiscoveryTool.
1. Download and install GWN DiscoveryTool from the following link:
http://www.grandstream.com/support/tools
2. Open the GWN DiscoveryTool, and click on Scan.
3. The tool will discover all GWN7600 Access Points connected on the network showing
their MAC and IP addresses.
4. Click on Manage Device-
face, or type in manually the displayed IP address on your browser.

FCC Caution:
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This
equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.