Green Brook LVBLB-A User manual

+9W PL Lamps supplied
+ Supplied with both plain & louvered front plates
+ Fits standard house bri k avity
These instructions re for bricklight models:
LVBLB-A nd LVBLW-A.
WARNING: Ele tri ity is dangerous. Installation
of this fitting must be arried out by a ompetent
person. If in any doubt, please onsult a qualified
ele tri ian.
INSTALLATION
This is common on both models.
Firstly, ple se check whether the light fixture
h s been d m ged during tr nsport. When
st rting inst ll tion, disconnect the power
first from the m ins supply nd then c rry out
the following steps:-
1. Bring c ble from the m ins to the
position where you wish to inst ll the
fitting. M ke sure the c ble you use is
suit ble for the pplic tion.
2. Remove the front cover, the gl ss nd ge r
tr y from the fitting.
3. Using the fitting s templ te, m rk, drill
nd plug the mounting holes in the c vity.
With sh rp bl de cut cross in the
rubber grommet sufficient to llow
insertion of the m ins c ble.
4. Insert the c bles through the rubber
grommet nd mount the fitting in the
c vity screwing it into position.
5. Smother the he ds of the screws nd the
point of entry of the c ble with silicon so
s to ensure w ter tightness. If you do not
do this, w ter will d m ge the fitting.
6. Ensure th t the g sket is well l id out nd
screw gl ss nd fr me into position.
INSTALLATION INSTRUCTIONS FOR
IP44 9W PL BRICKLIGHTS

WEST ROAD . HARLOW
ESSEX . CM20 2BG . UK
s [e-mail]
WWW.GREENBROOK.CO.UK
Issue No: 702002
PPLLEEAASSEE KKEEEEPP TTHHEESSEE
IINNSSTTRRUUCCTTIIOONNSS SSAAFFEE FFOORR
FFUUTTUURREE RREEFFEERREENNCCEE
7. Repl ce ge r tr y into position nd screw
it in firmly.
8. Connect m ins c ble to the termin l block
ensuring th t the Brown (L=Live) is
tt ched to the termin l block m rked ‘L’,
th t the Blue (N=Neutr l) is tt ched to
the termin l m rked ‘N’, nd the
Green/Yellow (E=E rth) c ble is tt ched
to the termin l block which h s the ‘E’ or
E rth symbol . Check th t the circuit is
working.
INSTALLER - Ple se p ss instruction m nu l
onto the owner of the unit
TECHNICAL
R ted Volt ge: 230V, 50Hz
Cl ss: IP44
L mp Type: 9W PL