Green Furniture Concept nova c series User manual

Nova C Series Add Ons
Manual

Index
p1-2
p3
p4
p5
p6
p7-10
p11-13
p14
p15-16
p17-21
p22
p23-27
Product description
Recycling
Assembly instructions|Nova C Back Armrest
Assembly instructions|Nova C Bench Armrest
Assembly instructions|Nova C Table
Assembly instructions|Nova C Endpiece Double
Assembly instructions Nova C Endpiece Singel
Assembly instructions Nova C Endpice Charger Cover Plate
Assembly instructions Radius Charger
Electrical instructions Radius Charger
Assembly instructions Food & Beverage Armrest
Electrical instructions Food & Beverage Armrest Charger

Nova C Series Add Ons Green Furniture Concept1
Nova C Bench Armrest
Nova C Bench Armrest can be placed in
any slender rib of the Nova C bench.
The default location is in the center of
the bench module.
Material: Powder coated steel.
Nova C Table
The Nova C Table can be placed in any
slender rib of Nova C Back, Nova C
Bench, Nova C Wall or Nova C Double.
The default location is in the center of
the bench.
Material table top: Massive oak treated
with hardwax oil.
Material table holder: Powder coated
steel.
Nova C Back Armrest
Nova C Back Armrest can be placed in
any slender rib of Nova C Back, Nova C
Wall, or Nova C Double. The default
location is in the center of the bench
module.
Material: Powder coated steel.
Product description
Add ons

Nova C Series Add Ons Green Furniture Concept2
Radius Charger
Nova Charger can be placed on any leg
of Nova C Bench, Nova C Back or Nova
C Back Double. Choose between your
prefered combination of outlets and/or
USB.
Material casing: Powder coated steel.
Material outlet: ABS
Product description
Add ons
Nova C Food & Beverage Armrest
Nova C Food & Beverage Armrest can
be placed in any end rib of the Nova C
bench.
Material table top: Massive oak treated
with hardwax oil.
Material table holder: Powder coated
steel.
Material outlet: ABS

Nova C Series Add Ons Green Furniture Concept2
Legs, strips, armrest, table holder and
small parts are made of steel and are
sorted as metal.
Glides are made of HDPE and are
sorted as plastic.
Ribs and table tops are made of wood
and adhesive and are sorted as
combustible.
Recycling
Nova C Series Add Ons Green Furniture Concept3

Nova C Back Armrest x1 Metal plate x2 Screw-nut A x4
Bolt B x4
Use slender rib with pre-drilled holes.
Assemble armrest with Bolt B, metal plate and
Screw-nut A
Assembly instructions
Nova C Back Armrest
1 2
Nova C Series Add Ons Green Furniture Concept4

Nova C Bench Armrest x1 Metal plate x2 Screw-nut A x4
Bolt B x4
Use slender rib with pre-drilled holes.
Assemble armrest with Bolt B, metal plate and
Screw-nut A
Assembly instructions
Nova C Bench Armrest
1 2
Nova C Series Add Ons Green Furniture Concept5

Nova C Table x1 Metal plate x1 Screw-nut A x5
Washer A x1
Bolt B x5
Use slender rib with pre-drilled holes.
Assemble table with Bolt B, Screw-nut A, Metal
plate and Washer A
Metal plate
Use slender rib with pre-drilled holes.
Assembly instructions
Nova C Table
1a 1b
2
6
Nova C Series Add Ons Green Furniture Concept

Assembly instructions
Nova C Endpice Double
Nova C Glides x4
Nova C Endpiece Leg x2 Nova C Slender Rib x14 Nova C Back Half Rib x12
Nova C Endpiece Clip x4 Nova C Back Metal
Strip 90 x2
Nova C Seat Metal
Strip 90 x2
Note:
Due to that the assembly of this
bench mostly is done with the ribs
upside down we recommend you
to use a blanket or simmilar to
prevent damage to the ribs and
metal parts.
Nova C Endpiece
Conection Plate x2
Top Bracket x1
Corner Bracket x2
Bolt A x8
Screw B x16
Screw A x94
Nova C Series Add Ons Green Furniture Concept7
Nova C Double Endpiece
Cover Plate x1
Bolt B x22

8
Assembly instructions
Nova C Endpice Double
12
Use bolt A to attach glides to the leg.
Use screw A to attach metal strips to
the ribs. Start with the outer slender ribs,
continue with the rest of the ribs.
3
Use screw A to attach the leg to
the rib construction.
56
Repeat step 1-4 on both
Endpieces and the push them togeter.
Attach the to Endpieces to each other
with bolt B and the Endpiece
Conection Plate. Attach the piecec both
under the seat and in the front.
4
Attach the Endpiece Clip to the
leg using bolt B.
Nova C Series Add Ons Green Furniture Concept

9
Assembly instructions
Nova C Endpice Double
78
9
Attach the Endpiece whit screw B.
Replace the three screws that are
already in the Back Metal Strip.
Only three of the screws in the rest of
the configuration should be replaced
with the new screws for the endpice.
Use screw B to attach the Endpiece to
the rest of the configuration through the
Endpiece Clip.
12
11
Attach the Top Bracket and the Corner
Brackets to the Endpiece Cover
using bolt A.
Nova C Series Add Ons Green Furniture Concept
10
Use screw A to attach the Endpiece to
the rib on the end in ther rest of your
configuration through the Endpiece Clip.
Place the Nova C Endpice Cover at
the end of the configuration.

13
Attach the Cover plate with Screw B.
Replace the three screws that are
already in the Metal Back Strip.
10
Assembly instructions
Nova C Endpice Double
14
15
Use screw A to conect the top of the
Cover Plate to the Back rib.
Nova C Series Add Ons Green Furniture Concept

Assembly instructions
Nova C Endpice Single
Nova C Series Add Ons Green Furniture Concept11
Nova C Glides x2
Nova C Endpiece Leg x1 Nova C Slender Rib x7 Nova C Back Half Rib x6
Nova C Endpiece Clip x1 Nova C Back Metal
Strip 90 x1
Nova C Seat Metal
Strip 90 x1
Note:
Due to that the assembly of this
bench mostly is done with the ribs
upside down we recommend you
to use a blanket or simmilar to
prevent damage to the ribs and
metal parts.
Top Bracket x1
Corner Bracket x2
Bolt A x8
Screw B x16
Screw A x94
Nova C Endpiece
Cover Plate x1
Bolt B x22

Assembly instructions
Nova C Endpice Single
Nova C Series Add Ons Green Furniture Concept12
12
34
Use bolt A to attach glides to the leg.
Use screw A to attach metal strips to
the ribs. Start with the outer slender ribs,
continue with the rest of the ribs.
Use screw A to attach the leg to
the rib construction.
Attach the Endpiece Clip to the
leg using bolt B.
56
Attach the Endpiece whit screw B.
Replace the three screws that are
already in the Back Metal Strip.
Only three of the screws in the rest of
the configuration should be replaced
with the new screws for the endpice.

Place the Nova C Endpice Cover at
the end of the configuration.
Assembly instructions
Nova C Endpice Single
Nova C Series Add Ons Green Furniture Concept
13
7
Use screw B to attach the Endpiece to
the rest of the configuration through the
Endpiece Clip.
8
Use screw A to attach the Endpiece to
the rib on the end in ther rest of your
configuration through the Endpiece Clip.
10
9
Attach the Top Bracket and the Corner
Brackets to the Endpiece Cover
using bolt A.
11
Attach the Cover plate with Screw B.
Replace the three screws that are
already in the Metal Back Strip.
12
Use screw A to conect the top of the
Cover Plate to the Back rib.

Attach the hole assembly to the Nova C
Endpiece configuration using screw A in
the Top Bracket and Screw B for the
Corner Brackets.
Assembly instructions
Nova C Endpice Charger Cover Plate
Nova C Series Add Ons Green Furniture Concept
14
1
2
Nova C Endpiece
Charger Cover Plate x1 Charger Cover x1
Screw-nut A x6
Washer A x6
Place the Charger Cover on the
Cover Plate.
Top Bracket x1
Corner Bracket x2
Attach the Top and Corner Brackets to
the Charger Cover Plate using washer A
and screw-nut A.
3
Screw B x6
Screw A x2

Nova C Series Add Ons Green Furniture Concept15
Charger x1 Cable kit x1
Screw A x7
Assembly instructions
Radius Charger
Bolt A x4
Cable clip x7

Nova C Series Add Ons Green Furniture Concept
16
Mount the charger on one of the benches legs.
Remove 7 of the current screws at the bottom
of the metal strip. Then use screw A to attatch
the cable clips to the available holes.
Use bolt A to tighten the charger to the leg.
Use the four holes closest to the edge.
Assembly instructions
Radius Charger
3 4
1 2
We recomende a distance of 20 mm between
the charger and the seat ribs. But you can also
choose the distance freely.
Insert the cable to the cable clips. Do it one
cable clip at a time.
5 6
Use the adapter to connect the cable with the
charger. If you have more chargers connect
them togheter otherwise connect to main power.

Nova C Series Add Ons Green Furniture Concept
17
French/
Belgian
Indian Italian
Swiss Chinese
Australian USA/
Japan
USB charge
+TUF
UK fused UK unfused Schuko/EU
MAXM
FUSE
5.

Radius Charger modularity
Radius Charger are available in single or double colors and the two outlets can be of any of the modules below.
Product description
Modularity & Apperance

Nova C Series Add Ons Green Furniture Concept18
Nova C Series
Radius charger as single color mounted on Nova C Back
IOU Series
Radius charger as single color mounted on IOU Back
Product description
Apperance